NB/T 10516-2021 English PDFUS$399.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email. NB/T 10516-2021: Standard for quality evaluating of surface coal mine installation engineering Status: Valid
Basic dataStandard ID: NB/T 10516-2021 (NB/T10516-2021)Description (Translated English): Standard for quality evaluating of surface coal mine installation engineering Sector / Industry: Energy Industry Standard (Recommended) Classification of Chinese Standard: D09 Word Count Estimation: 17,137 Issuing agency(ies): National Energy Administration NB/T 10516-2021: Standard for quality evaluating of surface coal mine installation engineering---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Standard for quality evaluating of surface coal mine installation engineering ICS 13.100 D09 Energy Industry Standards of the People's Republic of China Quality Evaluation Standards for Installation Engineering of Open-pit Coal Mine Released on 2021-01-07 Implementation on 2021-04-01 Issued by the National Energy Administration Table of contentsForeword Ⅲ 1 Scope 1 2 Normative references 1 3 Terms and definitions 1 4 General provisions 1 4.1 Evaluation basis 1 4.2 Evaluation Method 2 4.3 Evaluation content 2 5 Evaluation of equipment installation quality of stationary and semi-mobile crushing plants 3 5.1 Division of Division Project 3 5.2 Engineering Quality Evaluation of Mechanical Installation Division 3 5.3 Engineering Quality Evaluation of Electrical Installation Division 3 6 Evaluation of the installation quality of belt conveyor equipment 3 6.1 Division of project divisions 3 6.2 Engineering Quality Evaluation of Mechanical Installation Division 4 6.3 Engineering Quality Evaluation of Electrical Installation Division 4 7 Evaluation of the installation quality of the dredging system equipment 4 7.1 Division of sub-projects 4 7.2 Engineering Quality Evaluation of Mechanical Installation Division 5 7.3 Engineering Quality Evaluation of Electrical Installation Division 5 7.4 Quality evaluation of pipeline installation sub-project 5 8 Evaluation of the installation quality of water-proof and drainage system equipment 5 8.1 Division of sub-projects 5 8.2 Engineering Quality Evaluation of Mechanical Installation Division 6 8.3 Engineering Quality Evaluation of Electrical Installation Division 6 8.4 Quality Evaluation of Pipeline Installation Division 6 9 Evaluation of equipment installation quality of power supply and distribution system 7 9.1 Division of Divisional Projects 7 9.2 Project quality evaluation of overhead line installation division 7 9.3 Engineering Quality Evaluation of Electrical Installation Division 7 10 Quality evaluation of unit installation engineering 8 10.1 General provisions 8 10.2 Evaluation method 8 Appendix A (Normative Appendix) Entity Quality Measurement Actual Measure Score Table 9 Appendix B (Normative Appendix) Quality Assurance Data Scoring Form 10 Appendix C (Normative Appendix) Comprehensive Performance Evaluation Table 11 Appendix D (Normative Appendix) Appearance Quality Evaluation Form 12 Appendix E (Normative Appendix) Installation Unit Engineering Quality Evaluation Form 13ForewordThis standard was drafted in accordance with the rules given in GB/T 1.1-2009. Please note that some of the contents of this document may involve patents. The issuing agency of this document is not responsible for identifying these patents. This standard was proposed and managed by the China Coal Industry Association. The main drafting organizations of this standard. China Coal Pingshuo Group Co., Ltd., Coal Science and Technology Research Institute Co., Ltd., China Coal Science and Industry Energy Technology Development Co., Ltd., China Coal Energy Group Co., Ltd., Shenhua Zhuneng Group Co., Ltd., Liaoning Technical University, Yunnan Coal Carbon Industry Group Co., Ltd. The main drafters of this standard. Wang Xiangsheng, Liu Feng, Ding Xinqi, Liu Daowen, Zhou You, Chen Zaiming, He Changbin, Zhang Lei, Guo Sheng, Zhang Yan, Lu Wenqi, Fu Tianguang, Cao Kenan, Cao Yong, Wang Guilin, Tang Xiaoqian, Cao Lanzhu, Luo Huaiting, Yang Yang, Li Wei, Xu Chen, Liu Yu, Shang Guoan, Ai Chang, Shi Lingjie. Quality Evaluation Standards for Installation Engineering of Open-pit Coal Mine1 ScopeThis standard specifies the general requirements for the evaluation of the installation engineering of open-pit coal mines, and the installation of fixed and semi-mobile crushing plant equipment in open-pit coal mines. Quality evaluation, belt conveyor equipment installation quality evaluation, drainage system equipment installation quality evaluation, drainage system equipment installation quality evaluation, Installation quality evaluation of power supply and distribution system equipment, unit installation engineering quality evaluation, etc. This standard is applicable to the quality evaluation of installation projects within the scope of open-pit coal excavation sites and dumping sites.2 Normative referencesThe following documents are indispensable for the application of this document. For dated reference documents, only the dated version applies to this article Pieces. For undated reference documents, the latest version (including all amendments) is applicable to this document. GB 50175-2014 Code for quality acceptance of open-pit coal mine engineering GB/T 50375-2016 Construction Quality Evaluation Standard for Building Engineering GB 50946-2013 Code for quality acceptance of coal mine equipment installation engineering3 Terms and definitionsThe following terms and definitions apply to this document. 3.1 Construction quality evaluation The inspection, measurement, test and other activities done to the extent that the construction quality of the project meets the requirements of the specification, including the quality control of the construction process, raw materials Materials, operating technology, functional effects, project entity quality and project data, etc. 3.2 Qualityrecords In the process of project construction, the responsible entities and inspection agencies involved in the construction of the project, in order to reflect the quality of the project, follow the relevant national technical specifications The regulations, quality control, quality acceptance and other documents and audio-visual materials formed during the participation in project construction activities. 3.3 Weight In the quality evaluation system, a project is divided into several evaluation parts and systems, according to the size and impact of the workload of each part and system The degree of importance of the overall ability, the specified proportion. 3.4 Finebuildingengineering On the basis of meeting the requirements of relevant technical specifications, the safety of the engineering structure, the use function, the building energy saving, the visual quality and the quality of the The comprehensive evaluation of the project data is the construction project that meets the good specifications stipulated in this code.4 General rules4.1 Evaluation basis 4.1.1 The quality evaluation of the open-pit coal mine installation project is based on the unit project, and only the unit project and branch project are evaluated. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of NB/T 10516-2021_English be delivered?Answer: Upon your order, we will start to translate NB/T 10516-2021_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of NB/T 10516-2021_English with my colleagues?Answer: Yes. The purchased PDF of NB/T 10516-2021_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
