NBSHT0827-2010 PDF English
Price & Delivery
US$239.00 · In stock · Download in 9 secondsNBSHT0827-2010: Standard test method for sulfur compounds in light petroleum liquids by gas chromatograph and sulfur ive detection
Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure
Status: Valid
| Std ID | Version | USD | Buy | Deliver [PDF] in | Title (Description) |
| NB/SH/T 0827-2010 | English | 239 | Add to Cart | 3 days [Need to translate] | Standard test method for sulfur compounds in light petroleum liquids by gas chromatograph and sulfur ive detection |
Click to Preview a similar PDF
Basic data
| Standard ID | NB/SH/T 0827-2010 (NB/SH/T0827-2010) |
| Description (Translated English) | Standard test method for sulfur compounds in light petroleum liquids by gas chromatograph and sulfur ive detection |
| Sector / Industry | Energy Industry Standard (Recommended) |
| Classification of Chinese Standard | E30 |
| Classification of International Standard | 75.080 |
| Word Count Estimation | 9,951 |
| Date of Issue | 2010-05-01 |
| Date of Implementation | 2010-10-01 |
| Quoted Standard | GB/T 4756; GB/T 11140; SH/T 0253; ASTM D4307 |
| Adopted Standard | ASTM D5623-1994 (2004), NEQ |
| Regulation (derived from) | National Energy Board Notice No. 1 of 2010 |
| Issuing agency(ies) | National Energy Administration |
| Summary | This standard provides a variety of light petroleum distillates Determination of volatile sulfur compounds. This standard applies to petroleum distillates, gasoline (including gasoline containing oxygenates), and other final boiling point at atmospheric pressure of not more than 230��C petroleum distillates. This standard can be determined based on the mass fraction range of sample types and the instruments used vary, most cases, this standard applies to the determination of sulfur compounds in a single ten ancient sulfur content of the sample in 0. 1mg/kg ~ 100mg/kg. 1. 2 standard does not purport to all qualitative monomer sulfur compounds. Measurement range specified in the method, the linear response of the detector response to sulfur and sulfur compounds all shirt body equimolar response to sulfur are the undecided and sulfur compounds have been characterized monomers can be carried out quantitatively. However, many active sulfur compounds such as hydrogen sulfide, methyl mercaptan mass fraction in the sampling and analysis process will change. The total sulfur content of the sample can be measured sulfur content of sulfur compounds monomer cumulative estimate, but the standard does not determine the total sulfur content as the preferred method. 1. 3 standard uses the International System of Units (SI) units. 1. 4 This standard is not intended to refer to certain hazardous materials, operations, equipment and all safety related to this issue. Therefore, using a standard user, you should establish appropriate safety and protective measures, and make sure you have a hammer of management system. |
