LY/T 1717-2007 English PDFUS$419.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. LY/T 1717-2007: Guide for sampling inspection of wood-based panels
Basic dataStandard ID: LY/T 1717-2007 (LY/T1717-2007)Description (Translated English): Guide for sampling inspection of wood-based panels Sector / Industry: Forestry Industry Standard (Recommended) Classification of Chinese Standard: B70 Classification of International Standard: 79.060.01 Word Count Estimation: 12,186 Date of Issue: 2007-09-10 Date of Implementation: 2007-10-01 Quoted Standard: GB/T 2828.1-2003; GB/T 3358.1-1993; GB/T 3358.2-1993 Adopted Standard: BS EN326-1-1994, NEQ; BS EN326-2-2000, NEQ; BS EN326-3-1998, NEQ Issuing agency(ies): State Forestry Administration Summary: This standard specifies the plywood sampling of terms, definitions, symbols and abbreviations plywood Product dimensions and appearance count sampling, plywood, physical and mechanical properties of the test results and determine the representation and production enterprise product quality control samples are measured test, two laboratory measurements consistent statistical test and inspection reports. This standard applies to the implementation of plywood pattern evaluation, routine production, supervision, delivery, quality, consistency and other types of inspection sampling, sampling plans, sampling plans and test data statistical processing. This standard does not apply to structural plywood sampling, sampling plans and sampling programs. LY/T 1717-2007: Guide for sampling inspection of wood-based panels---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Guide for sampling inspection of wood-based panels ICS 79.060.01 B70 People's Republic of China Forestry Industry Standard General rules for sampling inspection of wood-based panels Released on.2007-09-10 2007-10-01 implementation State Forestry Administration released ForewordThis standard and BSEN326-1.1994 Wood-basedpanels-Sampling, cuttingandinspection-Part 1.Sam- Plingandcuttingoftestpiecesandexpressionoftestresults (Personal Panel Sampling, Cutting and Inspection Part 1. Sampling, specimen cutting and indication of test results"), BSEN326-2..2000 Wood-basedpanels-Sampling, cuttingand inspection-Part 2. Quality controlinthefactory ("Sandwiching, sampling and inspection - Part 2. Enterprise quality control System) and BSEN326-3..1998 Wood-basedpanels-Sampling, cuttingandinspection-Part 3.Inspection Ofaconsignmentofpanels ("Sampling, Cutting and Inspection of Wood-based Panels Part 3. Plate Delivery Inspection") This is the same, but has been edited. Editing modifications include. increased acceptance of the wood-based panels used as substrates in the count test The quantitative limit has increased the informative content and removed the informative overview elements in BSEN326. Appendix A of this standard is an informative annex. This standard is proposed and managed by the National Standardization Technical Committee for Wood-based Panels. This standard is drafted by. Institute of Wood Industry, Chinese Academy of Forestry. Participated in the drafting of this standard. Leshan Jixiang Artificial Forest Products Co., Ltd., Shengxiang Industrial (Shenzhen) Co., Ltd., Kono (Beijing) Wood Industry Co., Ltd., Sichuan Shengda Forest Products Co., Ltd., Zhejiang Beyake Wood Industry Co., Ltd., Shanghai Building Materials and Components Quality Supervision and Inspection Station, Guangxi Fenglin Forestry Development Co., Ltd., Green Ono Consulting Center, Jiangsu Provincial Product Quality Supervision and Inspection Center, Nanjing Forestry University, Shanghai Wood Institute of Materials Industry, Zhejiang Provincial Forest Products Quality Inspection Station. The main drafters of this standard. Wang Weixin, Zeng Zhen, Wu Shengfu, Fang Qinliang, Gao Qiuling, Huang Qiang, Xiang Zhonghua, Zhang Xizhong, Chen Wenyuan, Chen Yu, Zhang Zhiyu, Fang Chongrong, Huang Helang, Tao Weigen, Wang Chunming, Wang Yunlin, Zhang Jie. This standard was first published. General rules for sampling inspection of wood-based panels1 ScopeThis standard specifies the terms, definitions, symbols and abbreviations of wood-based panel sampling inspection, and the dimensions and appearance quality of wood-based panel products. Sampling test, representation and judgment of physico-mechanical performance test results of artificial boards, measurement sampling test of product quality control of production enterprises, two Statistical test and inspection report of the consistency of measurement results in the laboratory. This standard is applicable to sampling systems for the evaluation of types of wood-based panels, routine production, supervision, settlement, quality consistency, etc. Sample planning, sampling plan and statistical processing of test data. This standard does not apply to sampling systems, sampling plans and sampling plans for structural panels.2 Normative referencesThe terms in the following documents become the terms of this standard by reference to this standard. All dated references, followed by all Modifications (not including errata content) or revisions do not apply to this standard, however, parties to agreements based on this standard are encouraged to study Is it possible to use the latest version of these files? For undated references, the latest edition applies to this standard. GB/T 2828.1-2003 - Sampling procedures for sampling by sampling - Part 1 . Batch-to-batch inspections by Retrieving Quality of Acceptance (AQL) Plan (ISO 2589-1.1999, IDT) GB/T 3358.1-1993 Statistical terminology Part I General statistical terms GB/T 3358.2-1993 Statistical terminology Part II Statistical quality control terminology 3 terms, definitions, symbols and abbreviations 3.1 Terms and definitions GB/T 3358.1-1993, GB/T 3358.2-1993 and GB/T 2828.1-2003 established and the following terms and definitions apply Used in this standard. 3.1.1 A specified combination or set of requirements, or only the unit product is classified as qualified or unqualified, or only in the unit product is calculated The test of the number of cells. 3.1.2 Under the specified conditions, the measurement characteristics of the unit product are compared with the technical requirements by measurement, test or other methods, and judged The process of breaking the metering characteristics of the unit product. 3.1.3 Quality characteristics that can be measured on a continuous scale in the product being inspected. 3.1.4 According to the prescribed measurement sampling plan, some unit products are randomly selected from the batch for measurement test, and according to sample mean and sample standard The process of judging whether the batch is received or not. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of LY/T 1717-2007_English be delivered?Answer: Upon your order, we will start to translate LY/T 1717-2007_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of LY/T 1717-2007_English with my colleagues?Answer: Yes. The purchased PDF of LY/T 1717-2007_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
