LY/T 1599-2011 English PDF

US$369.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
LY/T 1599-2011: Rotary veneer
Status: Valid

LY/T 1599: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
LY/T 1599-2011	369	Add to Cart	3 days	Rotary veneer	Valid
LY/T 1599-2002	399	Add to Cart	3 days	Rotary cut veneer	Obsolete

Similar standards

GB/T 4897   LY/T 1580   HJ 571   LY/T 2512   LY/T 2146   LY/T 1598   

Basic data

Standard ID: LY/T 1599-2011 (LY/T1599-2011)
Description (Translated English): Rotary veneer
Sector / Industry: Forestry Industry Standard (Recommended)
Classification of Chinese Standard: B70
Classification of International Standard: 79.060.10
Word Count Estimation: 14,175
Date of Issue: 2011-06-10
Date of Implementation: 2011-07-01
Older Standard (superseded by this standard): LY/T 1599-2002
Quoted Standard: GB/T 155; GB/T 2828.1-2003; GB/T 17657; GB/T 18259; GB/T 19367
Adopted Standard: ISO 18775, NEQ
Regulation (derived from): State Forestry Administration in 2011 Notice No. 9
Issuing agency(ies): State Forestry Administration
Summary: This standard specifies the terms and definitions Veneer, classification, requirements, test methods, packaging, marking, transportation and storage. This standard applies to the production of ordinary plywood, block board and general non-structural laminated veneer lumber (LVL) and other products Veneer.

LY/T 1599-2011: Rotary veneer

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Rotary veneer ICS 79.060.10 B70 People's Republic of China Forestry Industry Standard Replacing LY/T 1599-2002 Rotary cut veneer Published on.2011-06-10 2011-07-01 implementation State Forestry Administration released

Foreword

This standard is drafted in accordance with the rules given in GB/T 1.1-2009. This standard replaces LY/T 1599-2002 "Rotary Cut Veneer". The main technical changes in this standard compared with LY/T 1599-2002 are as follows. ---Modified terms and definitions; ---Adjusted the dimensional tolerance requirements and modified the specification size inspection method; --- Revised the appearance quality requirements and adjusted the content; --- Modified the method for determining the moisture content. This standard is not equivalent to ISO 18775 "single board terminology, definition and determination of physical properties and deviation", and refer to ISO 2426-2 "glue Plywood surface appearance, etc. Part 2, Hardwood and ISO 2426-3, Plywood Surface Appearance, Part 3, Softwood Related content. Please note that some of the contents of this document may involve patents. The issuing organization of this document is not responsible for identifying these patents. This standard is proposed and managed by the National Standardization Technical Committee for Wood-based Panels (SAC/TC198). This standard is drafted by. Institute of Wood Industry, Chinese Academy of Forestry. Participated in the drafting of this standard. Dehua Group Holdings Co., Ltd., Zhejiang Shenghua Yunfeng New Material Co., Ltd., Dongguan, Guangdong Province City Riyuan Wood Industry Co., Ltd. The main drafters of this standard. Wang Jinlin, Li Chunsheng, Sun Chaokun, Gu Shuixiang, Ding Yongxing, Guo Hongwu, Chen Yongping, Pan Haili, Liu Hong. The previous versions of the standards replaced by this standard are. ---LY/T 1599-2002. Rotary cut veneer

1 Scope

This standard specifies the terms and definitions, classification, requirements, testing methods, packaging, marking, transportation and storage of rotary cut veneers. This standard applies to the production of ordinary plywood, ordinary blockboard and non-structural veneer lumber (LVL) and other products of the rotary cutting veneer.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article. Pieces. For undated references, the latest edition (including all amendments) applies to this document. GB/T 155 log defect GB/T 2828.1-2003 - Sampling procedures for sampling by sampling - Part 1 . Batch-to-batch inspections by Retrieving Quality of Acceptance (AQL) plan GB/T 17657 Artificial board and finished panel physicochemical properties test method GB/T 18259 wood-based panel and its surface decoration terminology GB/T 19367 Wood-based panel size determination

3 Terms and definitions

The following terms and definitions as defined in GB/T 18259 and GB/T 155 apply to this document. 3.1 A veneer made by a rotary cutting method.

4 classification

4.1 By tree species. ---Broad leaf material rotary cutting veneer; ---Coniferous material rotary cutting veneer. 4.2 By purpose. a) Table board, including. ---panel; --- Backboard. b) Inner veneer, including. ---core board; ---Long board (long core board). ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of LY/T 1599-2011_English be delivered?

Answer: Upon your order, we will start to translate LY/T 1599-2011_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of LY/T 1599-2011_English with my colleagues?

Answer: Yes. The purchased PDF of LY/T 1599-2011_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version LY/T 1599-2011?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version LY/T 1599-2011 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.