JY/T 0458-2014 English PDFUS$849.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email. JY/T 0458-2014: Equipment specifications of the major of vehicle applying and maintenance in vocational schools and colleges Status: Valid
Basic dataStandard ID: JY/T 0458-2014 (JY/T0458-2014)Description (Translated English): Equipment specifications of the major of vehicle applying and maintenance in vocational schools and colleges Sector / Industry: Education Industry Standard (Recommended) Classification of Chinese Standard: Y51 Word Count Estimation: 34,330 Date of Issue: 7/31/2014 Date of Implementation: 10/1/2014 Regulation (derived from): Education letter [2014] No. 16 Issuing agency(ies): Ministry of Education of the People's Republic of China JY/T 0458-2014: Equipment specifications of the major of vehicle applying and maintenance in vocational schools and colleges---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Equipment specifications of the major of vehicle applying and maintenance in vocational schools and colleges ICS 03.180 Y 51 Record number 46931-2014 Education Industry Standard of the People's Republic of China Replacing JY/T 0380-2006 Majors in automotive application and maintenance in vocational colleges Instrument and equipment specifications Equipment specifications of the major of in motor vehicle use and maintenance in vocational schools and colleges 2014-07-31 release 2014-10-01 implementation Published by the Ministry of Education of the People's Republic of China JY ForewordThis standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard replaces JY/T 0380-2006 "Standards for the Provision of Professional Instruments and Equipment for Automobile Use and Maintenance". This standard is proposed by the Vocational Education and Adult Education Department of the Ministry of Education of the People's Republic of China. This standard is under the jurisdiction of the National Technical Committee for Standardization of Teaching Instruments (SAC/TC 125). This standard was drafted. Vocational Education and Adult Education Department of the Ministry of Education, Educational Equipment Research and Development Center of the Ministry of Education, Chinese Occupation Experts of Vocational Education Equipment Professional Committee of Technical Education Society, Beijing Vocational College of Transportation, China Auto Repair Industry Association Committee, Ningbo Yinzhou Vocational Senior Middle School, Guangzhou Vocational College of Transportation, Sichuan Vocational College of Transportation, Xingtai Vocational College Institute of Technology \\ Maha (Beijing) Trading Co., Ltd., Beijing Zhongjinghe Mechanical and Electrical Equipment Co., Ltd., Tianjin Younite Automotive Electronic Control Technology Services Co., Ltd., Beijing Italian-Chinese Italian Educational Equipment Co., Ltd., Hangzhou Zhuoyuan Teaching Equipment Co., Ltd., Zhejiang Yalong Educational Equipment Co., Ltd., Zhejiang Tianhuang Technology Industrial Co., Ltd., Zhuhai Longshen Co., Ltd., Shanghai Haijingge Automobile Technology Co., Ltd. The main drafters of this standard. Cheng Yuguang, Wang Kaiming, Wang Shengguo, Liu Jianping, Chen Qing, Ma Jingang, Zhang Yaodong.IntroductionIn recent years, the automobile maintenance industry has developed rapidly with the increase in the number of cars in China, which requires a large number of people with intermediate and advanced technical skills. Talents, teaching and training equipment are the guarantee for the training of qualified personnel with vocational skills. Related to professional experiment and training equipment and equipment, speed up the pace of standardization of vocational schools, and improve the service capacity of vocational education, This standard is specially formulated. This standard is based on JY/T 0380-2006 "Standards for Professional Equipment and Equipment for Automobile Operation and Maintenance" Equipment requirements for related professional experiments and training equipment of the School of Business New professional conditions have been added on the basis of vehicle application and maintenance majors, and it is determined that this standard mainly deals with related disciplines in the automotive aftermarket. industry. This standard covers all related professions in the automotive application and maintenance category in the newly-promulgated professional directory for higher and secondary vocational schools. This standard takes full account of industry employment standards, teaching reform, curriculum standards, new technology development and evaluation requirements. The differences between the majors and senior vocational schools included in this standard are mainly due to the different depths of the learning content. It is not very large, and it is properly distinguished only in type and quantity. When determining the requirements for each professional instrument, equipment and equipment, the connotation of the specialty shall prevail, and the professional name shall not be used for determination. Specifications for professional equipment and equipment related to automobile use and maintenance in vocational colleges1 ScopeThis standard specifies the specifications for instruments and equipment for teaching and training related to automobile use and maintenance in higher vocational colleges, including Classification and requirements of equipment. This standard applies to higher vocational colleges related to automotive application and maintenance related majors (used car identification and evaluation, automotive electronics technology, automotive Damage determination and assessment, automotive service and management, automotive modification technology, automotive technical service and marketing, automotive inspection and maintenance technology, automotive marketing And maintenance, automobile shaping technology, new energy vehicle maintenance technology, automobile application technology, etc.) and secondary vocational school automobile application and maintenance Related majors (automobile application and maintenance, auto body repair, auto beauty and decoration, auto vehicle and accessories marketing) for teaching and training Equipment and equipment. Other professional colleges and training institutions related professional teaching and training equipment and equipment can be implemented by reference.2 Normative referencesThe following documents are essential for the application of this document. For dated references, only the dated version applies to this document. For undated references, the latest version (including all amendments) applies to this document. GBZ 1 Hygienic Standard for Design of Industrial Enterprises GB/T 1216 outside micrometer GB/T 1723 Coating viscosity determination method GB/T 1730 Paint and varnish swing bar damping test GB 2554 mechanical indexing head GB/T 3785 electroacoustic sound level meter GB/T 6739 Paint and varnish pencil method for determination of film hardness GB/T 9286 Crosshatch test for paints and varnishes GB/T 11798.5 Technical requirements for verification of motor vehicle safety testing equipment. Part 5. Technical requirements for verification of filter paper smoke meters GB/T 11798.6 Technical conditions for the verification of motor vehicle safety testing equipment. Part 6. Technical strips for the verification of symmetrical light headlamp detectors GB/T 11798.7 Technical requirements for the verification of motor vehicle safety testing equipment. Part 7. Technical requirements for the verification of axle (wheel) weight gauges GB/T 11798.9 Technical requirements for the verification of motor vehicle safety testing equipment. Part 9. Technical requirements for the verification of flat brake test benches GB/T 13563 Roller car speedometer test bench GB/T 13564 Roller reaction vehicle brake test bench GB/T 21389 Vernier, Band Watch and Digital Caliper GB 21746 General Requirements for Safety Requirements for Teaching Instruments and Equipment GB 21748 Safety requirements for teaching instruments and equipment GB/T 22095 cast iron flat plate GB 50016 fire protection code for building design 50033 Architectural Lighting Design Standard GB 50034 Architectural Lighting Design Standard GB 50067 Code for fire protection design of garages, garages and parking lots JB/T 3411.56 square box size JT/T 155 car lift JT/T 324 car spray paint room JT/T 386 Automotive Exhaust Analyzer JT/T 445 Vehicle Chassis Dynamometer JT/T 448 Automobile suspension device test bench JT/T 503 Automobile Engine Comprehensive Tester JT/T 505 Four Wheel Positioner JT/T 506 opacity smoke meter JT/T 507 automobile side slip inspection table JT/T 508 Motor vehicle headlight detector JT/T 632 car fault computer diagnostic instrument JT/T 633 Car Suspension Steering Clearance Checker JT/T 635 tire changer JT/T 638 car engine electric nozzle cleaning detector JT/T 639 car body correction machine QB/T 1558.1 General technical requirements for vice3 categories3.1 The equipment requirements for professional and related equipment for high- and middle-vocational automobile use and maintenance are set to two categories, namely "qualified equipment requirements" and "display Fan equipment requirements. " 3.2 "Qualified Equipment Requirements" is the basic equipment that should be achieved to open a major in automobile application and maintenance related disciplines and complete the training of professionals. Requirements; "Demonstration Equipment Requirements" are basic equipment requirements that should be met by professional demonstration and related majors in automobile application and maintenance. The school chooses to increase students' practical training courses, improve their professional skills, and keep up with the development of new technologies and processes in their specialty.4 Requirements4.1 Basic (environmental) requirements for training teaching places 4.1.1 Use area In order to give full play to the effectiveness of training equipment, training places such as laboratories, training rooms and training workshops should be based on the health and safety requirements of teachers and students Determine the use area with the content of the teaching. If the use area of a single room cannot meet the requirements, the number of training rooms of the same type should be increased. And in line with the country Regulations. 4.1.2 Daylighting The lighting of the training place shall be in accordance with the relevant regulations of GB 50033. Daylighting design should pay attention to the direction of light and avoid obstructing work Block and unfavorable shadows. For places that need to identify colors, lighting materials that do not change the color of natural light should be used. 4.1.3 Lighting When natural light is insufficient, artificial lighting should be configured, and the artificial light source should be a light source close to the color temperature of natural light. Photo of the training place Ming should choose the light source with the corresponding color rendering index according to the requirements of the teaching content for identifying the color of the object and the characteristics of the place. Generally, the color rendering index is not lower than Ra80. The lighting requirements of the training place should meet the relevant regulations of GB 50034. Carry out detailed operation training (such as. scribing, metal finishing, Gap adjustment, etc.) The illuminance of the work area of benches, instruments, equipment, etc. should not be less than 500 lx. Local supplementation should be added when the illumination is insufficient Lighting, supplementary lighting should not produce harmful glare. 4.1.4 Ventilation Should meet the relevant requirements of GB 50016 and industrial enterprise ventilation. 4.1.5 Fire protection It shall comply with GB 50016 regulations on fire prevention in factories and warehouses and GB 50067 regulations. 4.1.6 Hygiene Should meet the relevant requirements of GBZ 1, GB 12801. Safety signs should meet the relevant requirements of GB 2894 and GB 2893. 4.2 Equipment requirements 4.2.1 The training equipment is divided into 18 categories according to professional teaching content (see Table 1). Relevant majors in senior and secondary vocational schools should be equipped with relevant Should be the type of training equipment. Note. This classification is not a laboratory, training room and training workshop of the same name that must be established by the institution. Vocational colleges can Corresponding training places. 4.2.2 The requirements for all types of training equipment shall be in accordance with Tables 2 to 19. 4.2.3 The number of sets of instruments and equipment in Table 2 to Table 19 is to meet the equipment requirements for simultaneous training and teaching for 40 people per class. Guaranteed training Under the premise of academic requirements, each school can reasonably arrange the training courses according to the actual number of classes in the major, and be equipped with corresponding equipment Quantity. 4.2.4 Colleges and universities can select the corresponding specifications and models according to the regional characteristics and the specific requirements of employees in the automotive use and maintenance market. equipment. 4.2.5 The quality of the equipment and equipment provided shall conform to the relevant national standards or industry standards, and have corresponding quality certificates. Table 1 Training equipment categories of professional equipment related to automobile application and maintenance Classification of training equipment Automobile application and maintenance related majors Vocational secondary school classification name 1 Electrical and electronic experimental equipment ● ● ● ● ● ● ● ● ● ● ● ● ● ● 2 Hydraulic and pneumatic experimental equipment ● ● ● ● ● ● ● ● ● ● ● ● ● ● 3 Fitter training equipment ● ● ● ● ● ● ● ● ● ● ● ● ● ● Automobile engine machinery training device ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● Car engine control system Training equipment ● ● ●-●-● ●-● ● ●--- Automobile chassis machinery training set ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● Car chassis control system Training equipment ● ● ●-●-● ●-● ● ●--- Automotive body electrical training ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● 9 Car air conditioning training equipment ● ● ●-●-● ●-● ● ●--- 10 Vehicle training equipment ● ● ● ● ● ● ● ● ● ● ● ● ● ● 11 Automotive sheet metal training equipment ●-●-●---●---● ●- 12 Car painting training equipment ●-●-●---●---● ●- 13 Automobile comprehensive equipment ● ● ●-●-●--● ● ●--- Application of automotive information materials Training equipment ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● Car simulation simulation training set ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● 16 Automotive marketing training equipment ●-● ●-●-●------● ● Car beauty and decoration training -------------● 18 New Energy Vehicle Training Equipment-●----●--● ●---- Note. "●" indicates the type of training instruments and equipment that should be provided for the corresponding major, and "-" indicates not required. Table 2 Electrical and electronic experimental equipment and equipment requirements Training Teaching Objectives Equipment requirements Name specifications, main parameters or main requirements Quantity Execution target Quasi-code Note Vocational secondary school 1. Complete electrician, electricity Basic skills Able to train 2. Master the multimeter Common instrument How to use the table And basic power parameters Number measurement method; 3. Will use oscilloscope Device, master the basic electricity Measurement of road signals, Learn about signal characteristics. Electrical and Electronic Comprehensive Test bench 1. With common electrical and electronic instruments Use and measurement of basic electrical parameters of components Volume function 2. Capable of measuring the characteristics of circuit components set; 3. For the test of basic theorems of electrotechnology certificate; 4. Capable of R, L, C component circuits Experiment and data measurement. Desk 20 20 10 20 Safe implementation of GB 21746, GB 217482 General scope1.1mV/div, bandwidth 15MHz; 2.5mV/div, bandwidth 20MHz; 3. Time base. 0.2 μ s/div ～ 0.5 μ s/div; 4.Vertical mode. Y1, Y2 alternate, break Continued, added, subtracted; 5.Trigger mode. normal, automatic, peak The value is automatic. Desk 20 20 10 203 Multimeter1. DC voltage. 0V ～ 25V;.20000Ω/V 0V ～ 500V; 5000Ω/V; ± 2.5% 2. AC voltage. 0V ～ 500V; 5000Ω/V; ± 5.0% 3. Resistance. 0Ω ～ 4kΩ ～ 40kΩ ～ 400k Ω ～ 4M Ω ～ 40M Ω, 25Ω center, ± 2.5% 4. Audio level. -10db ～ 22db Only 20 20 10 20 4 Electrical tools to meet the requirements of electrical and electronic experimental teaching sets 20 20 10 20 Table 3 Requirements for hydraulic (pneumatic) experimental instruments and equipment Training Teaching Objectives Equipment requirements Name specifications, main parameters or main requirements Quantity Execution target Quasi-code Note Vocational secondary school 1.Understand hydraulic pressure With control element Basic principles and conclusions Construct 2. Master the hydraulic base The work of this loop principle; 3.Has a foundation This hydraulic circuit and Hydraulic drive system Ability. Hydraulic teaching test Inspection station 1.With pressure control, speed control and more Cylinder action control function; 2. With pump loading and unloading functions; 3. With the function of throttling and overflow characteristics testing; 4. Function display function. Desk 1 1 1 1 Hydraulic system often With components Gear pump, vane pump, plunger pump, throttle Valve, relief valve, pressure reducing valve, hydraulic cylinder Set 1 2 1 2 Available Old Table 4 Equipment requirements for fitter training equipment Training Teaching Objectives Equipment requirements Name specifications, main parameters or main requirements Quantity Execution target Quasi-code Note Vocational secondary school 1. Can be used correctly Gage, size Measurement Solution with tolerance knowledge Resolve the problem 2. Basically equipped with clamps Scribe, saw Cut, file, drill, Tapping and other basic operations Work skills. Workbench And vise Jaw width≥150mm 20 40 20 40 QB/T 1558.1 Workman Satisfy the teaching requirements of fitter training 20 20 20 40 3 Maximum drilling diameter of bench drilling machine. ≥12mm 2 2 2 2 4 Electric drill 4 4 4 4 5 Grinder diameter ≥150mm, fixed table 2 2 2 2 6 Flat plate size ≥1000mm × 800mm 2 2 2 2 GB/T 220957 crossed square boxDimensions. ≥250mm × 250mm × 250mm 2 2 2 2 JB/T 3411.56 8 universal indexing head 1 2 1 2 GB 2554 9 Vernier caliper accuracy 0.02, ≥125mm pieces 20 40 20 40 GB/T 21389 10 dial indicator with magnetic stand 4 4 4 4 11 Outside Micrometer 0mm ～ 25mm, 25mm ～ 50mm, 50mm ～ 75mm, 75mm ～ 100mm, 100mm ～ 125mm 4 4 4 4 GB/T 1216 12 inside diameter dial indicator 25mm ～ 50mm, 50mm ～ 75mm, 75mm ～ 100mm, 100mm ～ 125mm Set of 4 4 4 4 13 steel ruler 0mm ～ 150mm, 0mm ～ 300mm sleeve 20 40 20 40 0mm ～ 500mm, 0mm ～ 1000mm sleeve 4 4 4 4 Table 5 Equipment requirements for automotive engine machinery training equipment Training Teaching Objectives Equipment requirements Name specifications, main parameters or main requirements Quantity Execution target Quasi-code Note Vocational secondary school 1.Can carry cars Engine assembly, Structure and safety of components Installation position and function description; 2. Can complete the car Engine disassembly and assembly; 3.Can use cars Engine repairman Tools, gauges and equipment For each engine Repairs complex. Real anatomy hair motivation 1. The engine is dissected in kind; 2.Can show the internal structure of the engine As well as the relative positions and Motivation work process. Desk 1 1 1 1 Engine Departments Unified teaching board Can show engine fuel supply system, cold But system, lubrication system, ignition system, start The basic composition and working principle of the department Set 1 1 1 1 Petrol Engine Parts 1. Crank connecting rod mechanism parts; 2. Gas distribution mechanism parts; 3. Fue......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of JY/T 0458-2014_English be delivered?Answer: Upon your order, we will start to translate JY/T 0458-2014_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of JY/T 0458-2014_English with my colleagues?Answer: Yes. The purchased PDF of JY/T 0458-2014_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
