GHT1084-2012 English PDF

US$259.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GHT1084-2012: Saw for saw gin and saw delinter
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GH/T 1084-2012	259	Add to Cart	3 days	Saw for saw gin and saw delinter	Valid

Similar standards

GB/T 2818   LY/T 1346   GH/T 1094   GH/T 1085   GH/T 1074   

Basic data

Standard ID: GH/T 1084-2012 (GH/T1084-2012)
Description (Translated English): Saw for saw gin and saw delinter
Sector / Industry: Supply and Marketing Cooperatives Industry Standard (Recommended)
Classification of Chinese Standard: B93
Classification of International Standard: 65.040.20
Word Count Estimation: 10,119
Older Standard (superseded by this standard): GH/T 1005-1998
Quoted Standard: GB/T 191; GB/T 699-1999; GB/T 2828.1-2003; GB/T 6388
Regulation (derived from): ?Industry Standard Filing Announcement 2013 No.1 (Total No.157)
Issuing agency(ies): All-China Federation of Supply and Marketing Cooperatives
Summary: This standard specifies the serrated cotton gin, serrated blade stripping machine Cashmere classification and marking, technical requirements, appearance quality, inspection methods, inspection rules and signs, packaging and storage requirements. This sta

GHT1084-2012: Saw for saw gin and saw delinter

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Saw for saw gin and saw delinter ICS 65.040.20 B93 Record number. 38159-2013 People's Republic of China supply and marketing cooperation industry standards Replace GH/T 1005-1998 Serrated gin, sawtooth stripper saw blade Released on.2012-12-10 2013-03-15 implementation China National Supply and Marketing Cooperation Headquarters released

Content

Foreword I 1 Scope 1 2 Normative references 1 3 Classification and Marking 1 4 Technical requirements 4 5 Appearance quality 4 6 Test Method 4 7 Inspection rules 5 8 Marking, packaging and storage 6

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard replaces GH/T 1005-1998 "Sawtooth gin, sawtooth stripper saw blade", compared with GH/T 1005-1998, except In addition to editorial changes, the main technical changes are as follows. --- Increased the internal diameter of the saw blade 120.8mm and 115mm (see 3.1.1.1); --- Increased the outer diameter of the saw blade 330mm (see 3.1.1.1); --- Increased the tolerance level of the thickness of the saw blade (see Figure 1.1.1, Figure 1 of the.1998 version); --- Adjusted the range of the number of teeth of the saw blade (see 3.1.1.2, 3.1 of the.1998 edition); --- Modified the main parameters of saw blade serration (see 3.1.1.3, 3.2 of.1998 version); --- Added the presence of a saw blade that allows for other sizes of outer diameter, number of teeth and tooth profile (see 3.1.2); --- Modified the marking of the model number of the saw blade (see 3.2, 3.3 of the.1998 version); ---Modified the technical requirements for the use of saw blades (see 4.1,.1998, 4.2.1); --- Removed the requirement that the saw blade can use special imported plates (see 4.2.2 of the.1998 edition); --- Modified the technical requirements for the hardness of the saw blade (see 4.2, 4.3 of the.1998 edition); --- Improve the processing accuracy of the saw blade flatness (see 4.3, 4.4 of the.1998 edition); --- Increase the technical requirement of the saw blade thickness uniformity should not exceed 0.02mm (see 4.5); --- Removed the saw blade should not have the content of hammering (see the.1998 version of 4.10); --- Increased the amount of frosting on both sides of the ginning saw blade (see 4.6); --- Increased the content of the sides of the stripped saw blade to allow no chamfering (see 4.7); --- Increased the quality of the appearance requirements, moving the content related to the quality of the appearance into it (see Chapter 5); --- Increased the surface of the saw blade should be smooth, there should be no interlayer, crack (see 5.3); --- It is clarified that the accuracy of the measuring tool in the test method should be changed to the index value (see Chapter 6, Chapter 5 of the.1998 edition); --- Revised the parameters for thickness measurement in the test method (see 6.1, 5.1 edition of.1998); --- Increased the determination of the thickness uniformity of the saw blade (see 6.2); --- Revised the measurement range of the hardness of the saw blade in the test method (see 6.4, 5.3.2 of the.1998 edition); --- Increased appearance detection (see 6.9); ---Qualified quality level (AQL) in the inspection rules changed to the acceptance quality limit (AQL) according to the provisions of GB/T 2828.1-2003 (See 7.1.3, 6.3 of the.1998 edition); --- Revised the Receive Quality Limit (AQL) data (see Table 3 of 7.1.3, 6.3 of the.1998 version); --- The inspection level in the inspection rules is raised to the level II according to the provisions of GB/T 2828.1-2003 (see Table 3.1.3, Table 3,.1998). Version 6.3); --- Increased the marking, packaging and storage of the saw blade (see Chapter 8). This standard was proposed by the All-China Federation of Supply and Marketing Cooperatives. This standard is under the jurisdiction of the National Cotton Processing Standardization Technical Committee (SAC/TC407). This standard was drafted. Shandong Swan Cotton Machinery Co., Ltd., China National Supply and Marketing Cooperatives Zhengzhou cotton and linen engineering technology design Research Institute, China Cotton Association Cotton Processing Branch, Hebei Yuwu Cotton Machine Co., Ltd. The main drafters of this standard. Yang Bingsheng, Wang Yibin, Jia Lin, Hu Chunlei, Gao Chunyuan, Wang Ruixia, Yin Qingyun, Yang Tianmin. The previous versions of the standards replaced by this standard are. ---GH/T 1005-1998. Serrated gin, sawtooth stripper saw blade

1 Scope

This standard specifies the classification and marking, technical requirements, appearance quality of sawtooth ginning machine, sawtooth stripping machine saw blade (hereinafter referred to as "saw blade"). Inspection methods, inspection rules and marking, packaging and storage requirements. This standard applies to sawtooth ginning machines, sawtooth stripping machine saw blades.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only the dated version applies to this article. Pieces. For undated references, the latest edition (including all amendments) applies to this document. GB/T 191 packaging storage and transportation icon GB/T 699-1999 high quality carbon structural steel GB/T 2828.1-2003 - Sampling procedures for sampling by sampling - Part 1 . Batch-to-batch inspections by Retrieving Quality of Acceptance (AQL) plan GB/T 6388 transport packaging receipt and delivery mark

3 Classification and marking

3.1 Classification 3.1.1 Common saw blades Divided into 406, 320 and 330 according to the outer diameter. 3.1.1.1 Specifications The specifications of the commonly used saw blades are shown in Table 1. Table 1 Specifications Dimensions in millimeters Basic size type Name symbol saw blade 406 saw blade 320 saw blade 330 Diameter D φ406.4±0.25 φ320 0.50 0 φ320 0.50 0 φ320 0.50 0 φ330 0.50 0 Inner diameter d φ174.6 0.39 0.14 φ120.8 0.39 0.14 φ115 0.39 0.14 φ74.6 0.29 0.10 φ74.6 0.29 0.10 the inside diameter of And convex Key height Degree Difference t 172.3 117 111 71.3 71.3 ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GHT1084-2012_English be delivered?

Answer: Upon your order, we will start to translate GHT1084-2012_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GHT1084-2012_English with my colleagues?

Answer: Yes. The purchased PDF of GHT1084-2012_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.