Home Cart Quotation About-Us
www.ChineseStandard.net
SEARCH

GB/T 9252-2017 PDF English

US$145.00 · In stock · Download in 9 seconds
GB/T 9252-2017: Method for Pressure Cycling Test of Gas Cylinders
Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure
Status: Valid

GB/T 9252: Historical versions

Standard IDUSDBUY PDFDeliveryStandard Title (Description)Status
GB/T 9252-2017145 Add to Cart Auto, 9 seconds. Method for Pressure Cycling Test of Gas Cylinders Valid
GB/T 9252-2001359 Add to Cart 3 days Method for cycling test of gas cylinders Obsolete
GB/T 9252-1988RFQ ASK 3 days Method for cycling test of gas cylinders Obsolete

Similar standards

GB/T 9251   GB/T 9019   GB 8335   GB/T 4732.1   

GB/T 9252-2017: Method for Pressure Cycling Test of Gas Cylinders

---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT9252-2017
GB NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 23.020.30 J 74 Replacing GB/T 9252-2001 Method for Pressure Cycling Test of Gas Cylinders Issued on. OCTOBER 14, 2017 Implemented on. MAY 01, 2018 Issued by. General Administration of Quality Supervision, Inspection and Quarantine; Standardization Administration of PRC.

Table of Contents

Foreword... 3 1 Scope... 5 2 Normative References... 5 3 Terms and Definitions... 5 4 Basic Requirements for Testing Apparatus... 6 5 Measuring Instrument... 8 6 Test Medium and Test Temperature... 9 7 Basic Requirements for Test... 9 8 Test Precautions... 10 9 Test Records and Reports... 10

Foreword

This Standard was drafted as per the rules specified in GB/T 1.1-2009. This Standard Replaced GB/T 9252-2001 Method for Cycling Test of Gas Cylinders. Compared with GB/T 9252-2001, this Standard has the major technical changes besides editorial modifications. --- Modify the applicable scope of the standard; --- Add normative references; --- Give definitions against the terminology involved in this Standard; --- Delete testing apparatus flow chart; --- Modify and improve the basic requirements for testing apparatus; --- Supplement the requirements for use, installation, accuracy, and etc. of measuring instrument; --- Delete the relevant provisions of the tested cylinder; --- Modify the basic requirements for test; --- Delete the terms and conditions that belongs to the post operating methods and test operating procedures; --- Delete the relevant provisions of test after test; --- Specify the test records and report contents; --- Delete Appendix A in Edition 2001; --- Delete Appendix B in Edition 2001. Please note that some of the contents of this document may involve patents. The issuing agency of this document doesn’t assume responsibility for identifying these patents. This Standard was proposed and under the jurisdiction of National Technical Committee for Standardization of Gas Cylinders (SAC/TC 31). Drafting organizations of this Standard. Dalian Boiler and Pressure Vessel Inspection Institute, Dalian University of Technology. Jiangsu Tianhai Special Equipment Co., Ltd., Sinoma Science & Technology (Chengdu) Co., Ltd. Chief drafting staffs of this Standard. Dai Xingtao, You Hongxin, Han Bing, Zhang Baoguo, Hu Jun, Liu Runjie, Zhou Yihui, and Yang Minggao. The historical editions replaced by this Standard are as follows. --- GB/T 9252-1988, GB/T 9252-2001. Method for Pressure Cycling Test of Gas Cylinders

1 Scope

This Standard specifies the method for pressure cycling test of gas cylinders, basic requirements for test device. This Standard is applicable to the pressure cycling test of gas cylinders with nominal working pressure no greater than 70MPa (gauge pressure, the same below). This Standard is inapplicable to the gas cylinders filled with stuffing.

2 Normative References

The following documents are essential to the application of this document. For the dated documents, only the versions with the dates indicated are applicable to this document; for the undated documents, only the latest version (including all the amendments) are applicable to this document. GB/T 13005 Terminology of Gas Cylinders

3 Terms and Definitions

The following terms and definitions and those ones stipulated in GB/T 13005 are applicable to this document. 3.1 Pressure cycling When taking the pressure cycling test, a pressure cycling is called for a whole process in sequence of increasing pressure to the required upper pressure → holding → decreasing pressure to the required lower pressure → holding. 3.2 Cyclic pressure The repetitive alternating pressure values applied during the pressure cycling test, which include upper limit of cyclic pressure, and lower limit of cyclic pressure. 3.3 Required upper pressure The upper limit of the cyclic pressure specified in pressure cycling test. 3.4 Required lower pressure The lower limit of the cyclic pressure specified in pressure cycling test. 3.5 Holding time The time, during the pressure cycling process, in which the pressure is kept constant between the upper and lower limit of the cyclic pressure.

4 Basic Requirements for Testing Apparatus

4.1 The pressure device of tested cylinder can select the hydraulic pump or other pressure devices. 4.2 The pressure device shall have good sealing performance and steady pressure increasing rate; its flow rate shall be adjusted to meet the requirements of test cyclic frequency; the flow rate shall also be stable to keep the waveforms of all pressure cycling consistent. 4.3 The pressure-bearing pipeline shall be fixedly installed and properly arranged; its connection with the measuring instrument and testing system shall have good sealing performance. 4.6 The upper and lower limit deviation of the actually-measured cyclic pressure shall conform to the provisions of the corresponding gas cylinder standard. 4.7 The acquisition frequency of the testing apparatus against the pressure data shall be no less than 500 times/s; and the cyclic pressure-time data for 20 times pressure cycling shall be stored. 4.9 The testing apparatus shall be capable of monitoring the temperature of test medium and outer surface of the tested cylinder; and guaranteeing the above temperature within specified range. The contact temperature measuring element that measures outer surface temperature of tested cylinder shall be in good contact with the outer surface of the tested cylinder. When taking the specific environmental pressure cycling test at low or high temperature, the testing system shall be adapted to the appropriate test environment. 4.13 The testing apparatus shall be equipped with auxiliary equipment such as cooling, filtering devices to keep the valve and pump running continuously. 4.14 The testing system shall take appropriate safety precautions to ensure the safety of operator sand equipment during the test.

5 Measuring Instrument

5.1 Pressure measuring instrument 5.1.1 To meet the relevant requirements of 4.11, the testing apparatus shall be equipped with at least a precision pressure gauge, an electrical contact pressure gauge and a pressure sensor (or digital pressure gauge that can output a pressure signal). 5.1.2 The measuring range of pressure gauge (including general pressure gauge and electrical contact pressure gauge) shall be 2~3 times of the required upper pressure of the tested cylinder; the accuracy level shall be no less than Level-1.6; 5.1.3 The pressure measuring instrument shall be tested regularly, the testing period shall be performed as per the relevant provisions. 5.2 Temperature measuring instruments

6 Test Medium and Test Temperature

6.1 The circulating medium used in the test shall be featured by suitable viscosity, stable performance, not damaging the fracture after the tested cylinder is cracked, and adapting to the testing apparatus required hydraulic oil, water or other non-corrosive liquids. 6.2 When taking the pressure cycling test at the normal temperature, the temperature of test medium and test environment shall be no less than 5°C; and the temperature on outer surface of the tested cylinder shall not exceed 50°C.

7 Basic Requirements for Test

7.1 Before the test, perform the pressure increasing and decreasing for several times below the nominal working pressure against the tested cylinder, so that the air in the testing system can be discharged as much as possible. Confirm the testing system is leak-free. 7.2 Set the required upper pressure, required lower pressure and holding time. The required upper pressure shall conform to the provisions of corresponding gas cylinder standards; 7.3 Cyclic frequency shall conform to the provisions of corresponding gas cylinder standards; if there is no provisions of gas cylinder standards, it shall not exceed 15 times/min.

8 Test Precautions

8.1 For larger tested cylinder, fillers such as aluminum block or rod can be filled into the cylinder before filing the test medium, so as to improve the pressure-increasing and pressure-decreasing rate. The filler and test medium shall not occur chemical action, and shall not generate impact or friction against the inner wall of cylinder as the pressure cycling. 8.2 In addition to the cyclic pressure and connecting pipe’s action force against the cylinder mouth during the test, no additional force shall be imposed on the tested cylinder that may influence the stress state of the cylinder. 8.5 No one shall approach the testing system with pressure during the test. 8.6 In addition to use for the inspection related to the purpose of the test or for subsequent tests, the cylinder after taking the pressure cycling test shall be eliminated the functions of use.

9 Test Records and Reports

9.1 The relevant information and data during the test process shall be recorded as per the actual conditions of the cylinder pressure cycling test. After the completion of the test, the testing system can automatically generate test records; the test records shall take the picture, PDF and other document format that can’t be changed. The test records shall be detailed, true, accurate and traceable. ......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Image 1     Image 2     Image 3     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of English version of GB/T 9252-2017 be delivered?Answer: The full copy PDF of English version of GB/T 9252-2017 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.

Question 2: Can I share the purchased PDF of GB/T 9252-2017_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 9252-2017_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 9252-2017 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.

Question 5: Should I purchase the latest version GB/T 9252-2017?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 9252-2017 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.

How to buy and download a true PDF of English version of GB/T 9252-2017?

A step-by-step guide to download PDF of GB/T 9252-2017_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB/T 9252-2017".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3    Steps 4~6    Step 7    Step 8    Step 9