GB/T 9065.1-2015 English PDFUS$529.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 9065.1-2015: Hydraulic hose fittings -- Part 1: Hose fittings with O-ring face seal ends Status: Valid GB/T 9065.1: Historical versions
Basic dataStandard ID: GB/T 9065.1-2015 (GB/T9065.1-2015)Description (Translated English): Hydraulic hose fittings -- Part 1: Hose fittings with O-ring face seal ends Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: J20 Classification of International Standard: 23.100.40 Word Count Estimation: 25,273 Date of Issue: 2015-12-31 Date of Implementation: 2016-07-01 Older Standard (superseded by this standard): GB/T 9065.3-1988 Quoted Standard: GB/T 3; GB/T 196; GB/T 197-2003; GB/T 2351; GB/T 2878.1; GB/T 3103.1-2002; GB/T 7939; GB/T 10125; GB/T 17446; GB/T 20666; GB/T 20669; GB/T 20670; GB/T 26143; ISO 8434-3-2005 Adopted Standard: ISO 12151-1-2010, MOD Regulation (derived from): State Standard Announcement 2015 No.43 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the general requirements and dimensional requirements for the design and performance of O-ring face seal hose connections. These hose couplings are made of carbon steel and are suitable for hose inner diameter complying with the requirements of GB/T 2351 and include two types of connecting threads: one is an O-ring face seal end conforming to ISO 8434-3: 2005, Uniform thread, the applicable hose nominal diameter of 6.3 mm ~ 38 mm; the other using ordinary (metric) thread, the applicable hose nominal diameter of 5 mm to 51 mm. This type of hose fitting (see Figure 1 for typical examples) is suitable for use in hydraulic systems after assembly of hoses to meet the requirements of the corresponding hose standard, and can be used in general applications after assembly with suitable hoses. GB/T 9065.1-2015: Hydraulic hose fittings -- Part 1: Hose fittings with O-ring face seal ends---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Hydraulic hose fittings - Part 1. Hose fittings with O-ring face sealing ends ICS 23.100.40 J20 National Standards of People's Republic of China Replacing GB/T 9065.3-1988 Hydraulic hose connector Part 1. O-ring end face seal hose connector (ISO 12151-1..2010, Connectionsforhydraulicfluidpowerandgeneraluse- Hosefittings-Part 1. HosefittingswithISO 8434-3O-ringfacesealends, MOD) 2015-12-31 released 2016-07-01 implementation General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China China National Standardization Management Committee released Directory Preface III 1 Scope 1 2 normative reference document 1 3 Terms and definitions 2 4 performance requirements 2 5 Name of hose connector 2 Design 3 7 manufacturing 3 8 assembly procedures 4 9 purchase information 4 10 logo 4 Annotation 4 Appendix A (Normative appendix) Uniform internal thread swivel joint Hex head with snap-fit nut Minimum width 17 Appendix B (informative) This part is in contrast to the ISO standard Appendix C (informative) Application note for this part of the hose connector 19 Reference 20 ForewordGB/T 9065 "hydraulic hose connector" is divided into the following six parts. - Part 1. O - ring end seal hose connector; - Part 2. 24 ° cone seal end hose connector; - Part 3. Flange end hose couplings; - Part 4. stud end hose couplings; - Part 5. 37 ° flared end hose connector; - Part 6. 60 ° tapered hose connector. This part is part 1 of GB/T 9065. This part is drafted in accordance with the rules given in GB/T 1.1-2009. This part of the replacement GB/T 9065.3-1988 "hydraulic hose connector connection size welded or quick change type". With GB/T 9065.3- 1988 compared to the main technical changes as follows. - increased performance requirements, naming, design, manufacturing processes, assembly procedures, procurement information and logos; --- Increases the nominal size of the metric thread and increases the size and size of the 45 ° and 90 ° curved rotary hose fittings Claim; - Increased specification, type and size requirements for hose threads with uniform threads. This part uses the re-drafting method to modify the use of ISO 12151-1..2010 "for hydraulic transmission and general purpose pipe fittings hose connection Header Part 1. Hose Coupling with ISO 8434-3O Ring End Face Seal "(English version). The technical differences between this section and ISO 12151-1..2010 are as follows. --- on the normative reference documents, this part made a technical differences in the adjustment to meet China's technical conditions, adjust the situation Is reflected in Chapter 2, "normative reference documents", the specific adjustments are as follows. Replace ISO 4397 (see Chapter 1) with GB/T 2351 equivalent to international standards; Replace GB 6149-1 (see Figure 1) with GB/T 2878.1 equivalent to the international standard; Replace ISO 4759-1 (see 6.2, Tables 2 to 9) with GB/T 3103.1 equivalent to the international standard; Replace GB 6605 (see 4.1, 4.3) with GB/T 7939 with an international standard; Replace GB 9227 (see 7.3) with GB/T 10125 equivalent to international standards; Replace GB 5598 (see Chapter 3) with GB/T 17446 equivalent to the international standard; Replace GB 5864 (see 6.5, Table 3, Table 5, Table 7, Table 9) with GB/T 20666 with an international standard; Replace GB 68-2 (see 6.5, Table 3, Table 5, Table 7, Table 9) with GB/T 20669 with an international standard; Replace GB 263 (see 6.5, Table 3, Table 5, Table 7, Table 9) with GB/T 20670 with an international standard; Replace GB 1987 (see 4.3) with GB/T 26143 equivalent to international standards; ● Added references to GB/T 3 (see 6.5), GB/T 196 (see 6.5), GB/T 197-2003 (see 6.5); --- through the metric screw thread through the external thread hose connector, the internal thread rotary through the hose connector and the internal thread rotation 45 ° bend And 90 ° bend hose fittings (see Figure 2 and Table 2, Figure 4 and Table 4, Figure 6 and Table 6, Figure 8 and Table 8). --- Correction of ISO 12151-1..2010 Table 3, Table 4, Table 5 nut length dimension L3 error (see Table 5, Table 7, Table 9). --- Correction of ISO 12151-1..2010 Table 2, Table 3, Table 4, Table 5 thread unit (mm) error (see Table 3, Table 5, Table 7, Table 9 and Table A.1). --- Added normative appendix A, provides a uniform internal thread swivel joint with snap-on nut hexagon head minimum width size and Icon. This part also makes the following editorial changes. - to simplify the standard name according to our national standard naming rules; --- Added information Appendix B, provided with this part of the ISO standard chart, table number comparison table. --- Corrected the drawing error of the threaded part of the internal thread rotary joint in ISO 12151-1..2010 (see Figure 5, Figure 7, Figure 9). This part is made by the China Machinery Industry Federation. This part of the National Hydraulic and Pneumatic Standardization Technical Committee (SAC/TC3) centralized. This part is responsible for drafting units. Tianjin R & D Engineering Machinery Transmission Co., Ltd., Haiyan Pipe Fittings Manufacturing Co., Ltd. This part participates in the drafting unit. Zhejiang Suqiang Ge Hydraulic Co., Ltd., Eaton Hydraulic (Ningbo) Co., Ltd., Panzhihua Iron and Steel Group Technology Co., Ltd. Industrial Branch. The main drafters of this part. Feng Guoxun, Geng Zhixue, Zhu Xuchu, Luo Xuelong, Zhou Shunhua, Zhang Yin, Zhang Naiqi, Liu Huijin. This part of the previous version of the standard to replace the release of the situation. --- GB/T 9065.3-1988. Hydraulic hose connector Part 1. O-ring end face seal hose connector1 ScopeThis part of GB/T 9065 specifies the general requirements and dimensional requirements for the design and performance of the O-ring end seal hose connector. This class The hose connector is made of carbon steel and is suitable for hose diameters in accordance with GB/T 2351, which includes two connecting threads. one is compliant ISO 8434-3..2005 specified O-ring end of the sealing end, using a unified thread, the applicable hose nominal diameter of 6.3mm ~ 38mm; The other using ordinary (metric) thread, the applicable hose nominal diameter of 5mm ~ 51mm. Note 1. Materials other than carbon steel may be used by the manufacturer and the user. Note 2. For hose couplings for hydraulic or pneumatic braking devices on road vehicles, see ISO 4038, ISO 4039-1 and ISO 4039-2. This type of hose connector (shown in Figure 1 for a typical example) is suitable for use in a hydraulic drive system after fitting with a hose that meets the requirements of the corresponding hose standard. Appropriate hose assembly can be used for general applications. Description. 1 --- hose connector; 2 --- meet the GB/T 2878.1 requirements of the port; 3 --- O-ring; 4 --- pipe fittings; 5 --- nuts; 6 --- O-ring. Figure 1 Typical example of O-ring end seal hose connection2 normative reference documentsThe following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article Pieces. For undated references, the latest edition (including all revisions) applies to this document. GB/T 3 Common thread finish, shoulder distance, undercut and chamfer (GB/T 3-1997, eqvISO 3508. 1976 and ISO 4755. 1983) GB/T 196 Common thread basic dimensions (GB/T 196-2003, ISO 724..1993, MOD) GB/T 197-2003 Common thread tolerances (ISO 965-1..1998, MOD) GB/T 2351 External diameter and hose diameter for hydraulic pneumatic systems (GB/T 2351-2005, ISO 4397..1993, IDT) GB/T 2878.1 Hydraulic drive connections for metric and O-ring seals of oil and stud ends Part 1. Ports (GB/T 2878.1-2011, ISO 6149-1..2006, IDT) ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 9065.1-2015_English be delivered?Answer: Upon your order, we will start to translate GB/T 9065.1-2015_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 9065.1-2015_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 9065.1-2015_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 9065.1-2015?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 9065.1-2015 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
