GB/T 8298-2017 English PDFUS$279.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 8298-2017: Latex, rubber -- Determination of total solids content Status: Valid GB/T 8298: Historical versions
Basic dataStandard ID: GB/T 8298-2017 (GB/T8298-2017)Description (Translated English): Latex, rubber -- Determination of total solids content Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: B72 Classification of International Standard: 83.040.10 Word Count Estimation: 14,187 Date of Issue: 2017-12-29 Date of Implementation: 2018-07-01 Older Standard (superseded by this standard): GB/T 8298-2008 Regulation (derived from): National Standards Bulletin 2017 No. 32 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China GB/T 8298-2017: Latex, rubber -- Determination of total solids content---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Latex, rubber - Determination of total solids content ICS 83.040.10 B72 National Standards of People's Republic of China Replacing GB/T 8298-2008 Determination of total solid content of latex (ISO 124.2014, MOD) 2017-12-29 Posted 2018-07-01 implementation General Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China China National Standardization Administration released Directory Foreword Ⅲ 1 Scope 1 2 Normative references 1 3 principle 1 4 equipment 1 5 sample 1 6 test steps 1 6.1 General 1 6.2 atmospheric pressure 70 ℃ and 105 ℃ heating --- natural latex and synthetic latex 2 6.3 atmospheric pressure maximum temperature 160 ℃ heating --- synthetic latex 2 6.4 decompression heating --- synthetic latex 2 7 the result of that 2 8 precision description 3 9 Test Report 3 Appendix A (Informative) Drying conditions of synthetic latex at atmospheric pressure 4 Appendix B (informative) precision description 5 References 8 ForewordThis standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard replaces GB/T 8298-2008 "Determination of the total solid content of natural latex." This standard and GB/T 8298- 2008 compared to the main technical changes are as follows. --- Modify the standard name for the "determination of total latex solids content"; --- Modify the scope, increased for fresh natural latex and synthetic latex (see Chapter 1,.2008 edition Chapter 1); --- Modify the normative references, the ISO /T R9272 moved to the reference (see Chapter 2, references,.2008 edition chapter 2); --- Increase the oven can choose between 100 ℃ ~ 160 ℃ temperature and accuracy (see 4.2); --- Added "vacuum drying box" provisions (see 4.3); --- Increasing the determination of the total content of synthetic latex content (see Chapter 6); --- Added "controversial, the preferred method of heating at 70 ℃" (see 6.1); --- Modify the precision of the article as "see Appendix B", and with.2004,.2010 and.2012 to carry out the precision instead Precision carried out in.2001 (see Chapter 8, Appendix B, Chapter 8 of the.2008 edition). This standard uses redrafted Law Amendment uses ISO 124.2014 "Determination of total latex solids content (in English)." This standard and The technical differences of ISO 124.2014 and their reasons are as follows. --- On normative references, this standard made a technical difference with the adjustment to adapt to China's technical conditions. Adjust the situation Concentrated in Chapter 2 "Normative references", the specific adjustments are as follows. ● Replaced ISO 123 with GB/T 8290 modified to adopt international standards; --- Increased "test results in duplicate double parallel determination of results expressed" (see Chapter 7), is conducive to the use of this standard. This standard also made the following editorial changes. --- Added the English name of synthetic rubber acronyms (see note A.1). This standard proposed by the China Petroleum and Chemical Industry Federation. This standard by the National Standardization Technical Committee of rubber and rubber products of natural rubber sub-Technical Committee (SAC/TC35/SC8) Focused. This standard drafting unit. Chinese Academy of Tropical Agricultural Sciences Institute of Agricultural Products Processing, China National Petroleum Corporation Petrochemical Institute, Guangdong Province, Canton Rubber Group Co., Ltd. Maoming Branch. The main drafters of this standard. Lu Guang, Zhai Yue Qin, Huang Honghai, Wu Yi, Li Yanfei, Zhao Hui, Du Ye, Xu Yi. This standard replaces the standards previously issued as. --- GB/T 8298-1987, GB/T 8298-2001, GB/T 8298-2008. Determination of total solid content of latex Warning --- personnel using this standard should have formal laboratory work experience. This standard does not indicate all possible safety issues question. It is the user's responsibility to take appropriate safety and health measures and to ensure compliance with the requirements of the relevant state laws and regulations.1 ScopeThis standard specifies the method of determination of the total solids content of fresh natural latex, concentrated natural latex and synthetic latex. This standard applies to the source of natural rubber clover tree in Brazil and synthetic latex. This standard does not necessarily apply to natural latex and vulcanized latex from sources other than the Trifolvus, with latex or rubber water dispersions.2 Normative referencesThe following documents for the application of this document is essential. For dated references, only the dated version applies to this article Pieces. For undated references, the latest edition (including all amendments) applies to this document. GB/T 8290 concentrated natural latex sampling (GB/T 8290-2008, ISO 123.2001, MOD)3 principleThe sample is heated under normal pressure or vacuum conditions to a constant mass under certain conditions, the quality of the sample before and after heating changes to determine the total solids content. NOTE The determination of residues after drying for a period of time can be found in ISO 3251 [1].4 equipmentLaboratory conventional equipment, as well as the following equipment. 4.1 flat dish, diameter of about 60mm. 4.2 oven, the temperature can be controlled at 70 ℃ ± 5 ℃ or 105 ℃ ± 5 ℃, or can choose between 100 ℃ ~ 160 ℃ temperature, accurate To ± 5 ° C. 4.3 vacuum drying oven, the temperature can be controlled 125 ℃ ± 5 ℃ and the pressure control in 20kPa1) below. 1) 1 kPa = 1 kN/m2. 4.4 analytical balance, accurate to 0.1mg.5 sampleAccording to GB/T 8290 provisions of the method of sampling.6 test procedures6.1 General 6.2 for natural latexes or 6.2, 6.3 or 6.4 for synthetic latexes. Double parallel determination. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 8298-2017_English be delivered?Answer: Upon your order, we will start to translate GB/T 8298-2017_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 8298-2017_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 8298-2017_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 8298-2017?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 8298-2017 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
