Path: Home > GB/T > Page735 > GB/T 6495.3-2025

Price & Delivery

US$1654.00 · In stock · Download in 9 seconds
GB/T 6495.3-2025: Photovoltaic devices - Part 3: Measurement principles for terrestrial photovoltaic(PV) solar devices with reference spectral irradiance data
Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure
Status: Valid

Std ID	Version	USD	Buy	Deliver [PDF] in	Title (Description)
GB/T 6495.3-2025	English	1654	Add to Cart	9 days [Need to translate]	Photovoltaic devices - Part 3: Measurement principles for terrestrial photovoltaic(PV) solar devices with reference spectral irradiance data
GB/T 6495.3-1996	English	559	Add to Cart	3 days [Need to translate]	Photovoltaic devices. Part 3: Measurement principles for terrestrial photovoltaic (PV) solar devices with reference spectral irradiance data

GB/T 6495.3-2025: Photovoltaic devices - Part 3: Measurement principles for terrestrial photovoltaic(PV) solar devices with reference spectral irradiance data

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS 27.160 CCSK83 National Standards of the People's Republic of China Replaces GB/T 6495.3-1996 Photovoltaic Devices Part 3.Based on Standard Spectra Principle of Surface Photovoltaic Device Measurement of Irradiance Data (IEC 60904-3.2019, IDT) Published on 2025-12-31 Implemented on July 1, 2026 State Administration for Market Regulation The State Administration for Standardization issued a statement.

Table of contents

Preface III Introduction IV 1.Scope 1 2 Normative References 1 3.Terms and Definitions 2 4.Measurement Principle 2 5.Standard solar spectrum and irradiance angle distribution 2 Appendix A (Informative) SMARTS User Guide 71 References 73

Foreword

This document complies with the provisions of GB/T 1.1-2020 "Standardization Work Guidelines Part 1.Structure and Drafting Rules of Standardization Documents". Drafting. This document is Part 3 of GB/T 6495 "Photovoltaic Devices". GB/T 6495 has already published the following parts. ---Part 1.Measurement of Photovoltaic Current-Voltage Characteristics; ---Part 1-1.Measurement of Current-Voltage Characteristics of Multijunction Photovoltaic Devices; ---Part 2.Requirements for Standard Photovoltaic Devices; ---Part 3.Measurement Principle of Ground-Based Photovoltaic Devices Based on Standard Spectral Irradiance Data; ---Part 5.Determining the Equivalent Cell Temperature (ECT) of Photovoltaic Devices Using the Open-Circuit Voltage Method; ---Part 7.Calculation Method for Spectral Mismatch Correction in Photovoltaic Device Measurements; ---Part 8.Measurement of the Spectral Response of Photovoltaic Devices; ---Part 8-1.Measurement of the Spectral Response of Multijunction Photovoltaic Devices; ---Part 9.Characteristic Classification of Solar Simulators; ---Part 10.Methods for measuring linear correlation and linearity; ---Part 11.Initial light-induced degradation test method for crystalline silicon solar cells. This document replaces GB/T 6495.3-1996 "Photovoltaic Devices - Part 3.Measurement Principles and Standard Spectral Radiation of Ground-Mounted Photovoltaic Devices". Compared with GB/T 6495.3-1996, the main technical changes in "Illuminance Data" are as follows, apart from structural adjustments and editorial modifications. a) The scope and purpose have been combined, and the content of the scope has been changed (see Chapter 1, Chapters 1 and 2 of the.1996 edition); b) Added terms and definitions (see Chapter 3); c) The content regarding the measurement principle has been revised, and a description of its relationship with relevant standards has been added (see Chapter 4, Chapter 3 of the.1996 edition); d) The requirements for geometric and environmental parameters have been changed, with increased consideration of land surface type and the generation of spectral data using SMARTS models. The method of cloth cutting (see Chapter 5); e) Add the irradiance distribution of direct irradiance to Table 1, including direct spectral irradiance, direct photon flux, and cumulative integrated direct irradiance. (See Table 1,.1996 edition); f) Redraw the irradiance distribution map based on the standard spectral distributions of total radiation and direct radiation (see Figure 1,.1996 edition); g) The description of the current-voltage characteristics has been deleted. This content is described in GB/T 6495.1 (see Chapter 5 of the.1996 edition); h) The terminology content in Appendix A has been deleted (see Appendix A in the.1996 edition). This document is equivalent to IEC 60904-3.2019 "Photovoltaic devices - Part 3.Ground-mounted photovoltaics based on standard spectral irradiance data". Measurement principle of components. The following editorial changes have been made to this document. ---Adjust the scope of the chapter description; ---Move the footnotes in the text to the references. Please note that some content in this document may involve patents. The issuing organization of this document assumes no responsibility for identifying patents. This document was proposed by the Ministry of Industry and Information Technology of the People's Republic of China. This document is under the jurisdiction of the National Technical Committee on Standardization of Solar Photovoltaic Energy Systems (SAC/TC90). This document was drafted by. China Electronics Technology Standardization Institute, Fujian Provincial Institute of Metrology, and Guangdong Product Quality Supervision and Inspection Institute. Research Institute, National Institute of Metrology, China. The main drafters of this document are. Wang Ganqiang, Li Jiansheng, Chen Yue, Chen Xiaoda, Li Qicong, Yan Peilin, You Hongliang, Liu Shuqiang, and Li Huaining. The release history of this document and the document it replaces is as follows. ---First published as GB 6495-1986 in 1986, and revised for the first time in.1996; ---This is the second revision.

Introduction

GB/T 6495 proposes methods for measuring the performance of photovoltaic devices, as well as standards, value transfer, and result correction related to performance measurement. The requirements for the classification of testing equipment, etc., have positive guiding significance for the performance measurement of photovoltaic devices such as photovoltaic cells and photovoltaic modules. GB/T 6495 is proposed to consist of the following parts. ---Part 1.Measurement of Photovoltaic Current-Voltage Characteristics. The purpose is to specify the basic requirements for measuring the IV curve of photovoltaic devices. ---Part 1-1.Measurement of Current-Voltage Characteristics of Multijunction Photovoltaic Devices. The purpose is to specify the measurement of the IV characteristics of multijunction photovoltaic devices. Quantification method. ---Part 1-2.Measurement of Current-Voltage Characteristics of Bifacial Photovoltaic Devices. The purpose is to specify the IV characteristics measurement of bifacial photovoltaic modules. Quantification method. ---Parts 1-3.Measurement of Current-Voltage Characteristics of Curved Photovoltaic Devices. The purpose is to specify the measurement of the IV characteristics of curved photovoltaic devices. Quantification method. ---Part 2.Requirements for Standard Photovoltaic Devices. The purpose is to specify the requirements for standard photovoltaic devices. ---Part 3.Measurement Principles of Ground-Based Photovoltaic Devices Based on Standard Spectral Irradiance Data. The aim is to provide standard photovoltaic irradiance data. Degree data. ---Part 4.Procedures for Establishing Standard Photovoltaic Device Calibration Traceability. The purpose is to establish traceability for photovoltaic device calibration. program. ---Part 5.Determining the Equivalent Cell Temperature (ECT) of Photovoltaic Devices Using the Open-Circuit Voltage Method. The aim is to define the equivalent cell temperature (ECT) of photovoltaic devices. Method for testing the open-circuit voltage of battery temperature. ---Part 7.Calculation Method for Spectral Mismatch Correction in Photovoltaic Device Measurements. The purpose is to specify the calculation method for spectral mismatch correction. ---Part 8.Measurement of the Spectral Response of Photovoltaic Devices. The purpose is to specify the methods for measuring the spectral response. ---Part 8-1.Measurement of the Spectral Response of Multijunction Photovoltaic Devices. The purpose is to specify the measurement method for the spectral response of multijunction photovoltaic devices. method. ---Part 9.Classification of Solar Simulator Characteristics. The purpose is to specify the classification requirements for solar simulators used to measure photovoltaic devices. ---Part 10.Methods for Measuring Linear Correlation and Linearity Characteristics. The aim is to define the linearity characteristics of photovoltaic devices and their testing. method. ---Part 11.Test Method for Initial Light-Induced Degradation of Crystalline Silicon Solar Cells. The purpose is to specify the initial light-induced degradation test method for crystalline silicon solar cells. Attenuation test method. ---Part 12.Measurement methods for the current-voltage (IV) characteristics of perovskite photovoltaic cells and modules. The purpose is to specify the measurement methods for the current-voltage (IV) characteristics of perovskite photovoltaic cells and modules. Methods for measuring the IV characteristics of voltage-voltage devices. ---Part 13.Electroluminescence of Photovoltaic Modules. The purpose is to specify the testing methods for the electroluminescence of photovoltaic modules. Note. The correspondence between each part and the IEC 60904 series of international standards is as follows. ---Part 1 corresponds to IEC 60904-1; ---Part 1-1 corresponds to IEC 60904-1-1; ---Parts 1-2 correspond to IEC 60904-1-2; ---Parts 1-3 correspond to IEC 60904-1-3; ---Part 2 corresponds to IEC 60904-2; ---Part 3 corresponds to IEC 60904-3; ---Part 4 corresponds to IEC 60904-4; ---Part 5 corresponds to IEC 60904-5; ---Part 7 corresponds to IEC 60904-7; ---Part 8 corresponds to IEC 60904-8; ---Part 8-1 corresponds to IEC 60904-8-1; ---Part 9 corresponds to IEC 60904-9; ---Part 10 corresponds to IEC 60904-10; ---Part 13 corresponds to IEC 60904-13. Photovoltaic conversion exhibits spectral selectivity due to the properties of the semiconductor materials used in photovoltaic cells and modules. To compare different photovoltaic devices and... The relative properties of materials must be determined with reference to a standard solar spectral distribution. This document specifies such a reference solar spectral irradiance. distributed. This document also introduces the basic measurement principles for determining the electrical output of photovoltaic devices. The principles presented in this document aim to determine the performance of photovoltaic devices. The energy level is linked to the common standard ground solar spectral irradiance distribution. This document provides the standard ground-based solar spectral irradiance distribution to facilitate the assessment of solar energy performance according to the spectral performance requirements in IEC 60904-9. The simulator is categorized. Photovoltaic Devices Part 3.Based on Standard Spectra Principle of Surface Photovoltaic Device Measurement of Irradiance Data

1 Scope

This document specifies the basic measurement principles for measuring the electrical performance of ground-mounted photovoltaic devices under natural and simulated sunlight, as well as the measurement... The standard solar spectral irradiance distribution used. This document applies to the performance measurement of ground-mounted photovoltaic devices, and is used to compare the relative performance of different photovoltaic devices and materials. It can also be used based on... The spectral performance requirements specified in IEC 60904-9 are used for classifying solar simulators. Note. Ground-mounted photovoltaic devices include photovoltaic cells with protective covers, photovoltaic cells without protective covers, photovoltaic cell strings, photovoltaic modules, photovoltaic systems, etc.

2 Normative references

The contents of the following documents, through normative references within the text, constitute essential provisions of this document. Dated citations are not included. For references to documents, only the version corresponding to that date applies to this document; for undated references, the latest version (including all amendments) applies. This document. Note. GB/T 46982-2025 Temperature and Irradiance Correction Methods for IV Characteristics of Photovoltaic Devices (IEC 60891.2021, IDT) Note. GB/T 6495.1-2025 Photovoltaic devices - Part 1.Measurement of photovoltaic current-voltage characteristics (IEC 60904-1.2020, IDT) Note. GB/T 6495.2-2025 Photovoltaic devices - Part 2.Requirements for standard photovoltaic devices (IEC 60904-2.2023, IDT) IEC 60904-5 Photovoltaic devices – Part 5.Determination of equivalent cell temperature (ECT) of photovoltaic devices using the open-circuit voltage method [Photo- Note. GB/T 6495.5-2025 Photovoltaic devices - Part 5.Determination of equivalent cell temperature (ECT) of photovoltaic devices by open-circuit voltage method (IEC 60904- 5.2011, IDT) IEC 60904-7 Photovoltaic devices – Part 7.Calculation method for spectral mismatch correction in photovoltaic measurements vices) Note. GB/T 6495.7-2025 Photovoltaic devices - Part 7.Calculation method for spectral mismatch correction in photovoltaic device measurements (IEC 60904-7.2019) IDT) IEC 60904-8 Photovoltaic devices - Part 8.Measurement of the spectral response of photovoltaic devices Note. GB/T 6495.8-2025 Photovoltaic devices - Part 8.Measurement of spectral response of photovoltaic devices (IEC 60904-8.2014, IDT) ...