GB/T 4974-2018 English PDFUS$159.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 4974-2018: Air compressors, rock drilling machines and pneumatic tools -- Preferred pressures Status: Valid GB/T 4974: Historical versions
Basic dataStandard ID: GB/T 4974-2018 (GB/T4974-2018)Description (Translated English): Air compressors, rock drilling machines and pneumatic tools -- Preferred pressures Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: J72 Classification of International Standard: 23.140 Word Count Estimation: 8,875 Date of Issue: 2018-05-14 Date of Implementation: 2018-12-01 Older Standard (superseded by this standard): GB/T 4974-2005 Regulation (derived from): National Standards Announcement No. 6 of 2018 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 4974-2018: Air compressors, rock drilling machines and pneumatic tools -- Preferred pressures---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. (Air compressors, rock drilling machines and pneumatic tools) ICS 23.140 J72 National Standards of People's Republic of China Replace GB/T 4974-2005 Air compressor, rock drilling machine and Pneumatic tool priority pressure Aircompressors, rockdrilingmachinesandpneumatictools- (ISO 5941.1979, Compressors, pneumatictoolsandmachines- Preferredpressures, MOD) Published on.2018-05-14 2018-12-01 implementation State market supervision and administration China National Standardization Administration issued ContentForeword III 1 Scope 1 2 Normative references 1 3 Terms and Definitions 1 4 Air compressor priority rated pressure 1 5 Priority design pressure for rock drilling machines and pneumatic tools 2 Appendix A (informative) The technical differences between this standard and ISO 5941.1979 and their causes 4 Reference 5ForewordThis standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard replaces GB/T 4974-2005 "Air compressor, rock drilling machinery and pneumatic tools priority pressure". Compared with GB/T 4974-2005, the main technical changes in this standard are as follows. --- English name Compressors changed to Aircompressors (see cover,.2005 edition cover); --- Revised the terms and definitions of rated pressure (see 3.1,.2005 edition 3.1); ---Modify the nominal pressure term as design pressure and redefine it (see 3.2,.2005 edition 3.2); --- Increased the pressure value of Table 1. the first column increased by 0.2, 0.8, (35), (45), the third column increased by 0.05, 0.063, 0.12 0.63, 3.45, 12.5, 18, 31.5, adjusted the position of some pressure values in the table (see Table 1, Table 1 of.2005); --- Modify the second gear pressure in Table 2 to the fourth gear pressure, the pressure values of each gear are re-divided, and add 0.28, 0.8, 1.4, (see Table 2,.2005) Table 2). This standard uses the redrafting method to modify the use of ISO 5941.1979 "compressor, pneumatic tools and pneumatic machinery priority pressure." There are technical differences between this standard and ISO 5941.1979, and the terms involved in these differences have been passed on the outer margins of the margins. The vertical single line (│) is marked, and a list of the corresponding technical differences and their causes is given in Appendix A. This standard also made the following editorial changes. ---Modified standard name; --- Pressure unit replaces "bar" with "MPa". This standard was proposed by the China Machinery Industry Federation. This standard is under the jurisdiction of the National Compressor Standardization Technical Committee (SAC/TC145). This standard was drafted. Hefei General Machinery Research Institute, Tianshui Rock Drilling Machinery Pneumatic Tools Research Institute, Hefei General Mechanical and Electrical Products Testing Institute Limited. The main drafters of this standard. Ren Fang, Wang Jianzu, Chen Fang, Zhu Yuhui, Gao Xuejing, Bao Yangyang. The previous versions of the standards replaced by this standard are. ---GB/T 4974-1985, GB/T 4974-1989, GB/T 4974-2005. Air compressor, rock drilling machine and Pneumatic tool priority pressure1 ScopeThis standard specifies the priority pressure used to represent performance data for air compressors, rock drilling machines and pneumatic tools. This standard applies to air compressors, rock drilling machines and pneumatic tools. This standard also applies to the components of the compressed air system. Note. The pressures stated in this standard are gauge pressures.2 Normative referencesThe following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article. Pieces. For undated references, the latest edition (including all amendments) applies to this document. GB/T 2346 Fluid Transmission System and Component Nominal Pressure Series (GB/T 2346-2003, ISO 2944.2000, MOD)3 Terms and definitionsThe following terms and definitions apply to this document. 3.1 Rated pressure ratedpressure It shall be determined in the scope of 0.04MPa~45MPa for the design, manufacture and use of the unit specified in the standard, contract or nameplate. The pressure level used for the pressure level. Note. For air compressors, air compressors can be considered to have the best or near-optimal performance at rated pressure. 3.2 Design pressure designpressure The pressure that the tool or machine is expected to use, usually the machine is tested for performance at this pressure. Note 1. Suitable for rock drilling machines or pneumatic tools. Note 2. Refer to GB/T 5621 for performance test.4 Air compressor priority rated pressureThe preferred rated pressure of the air compressor is shown in Table 1. The first column in Table 1 is the nominal pressure value given in GB/T 2346; the second column is the air compressor The preferred rated pressure; the third column is the pressure values commonly found in general sales documents, which are air compressors, air compressor units and their gas storage tanks. Nominal pressure or maximum pressure. Table 1 unit is MPa Other rated pressures commonly used for nominal pressure priority rated pressure 0.04 0.04 0.05 0.063 0.063, 0.08 ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 4974-2018_English be delivered?Answer: Upon your order, we will start to translate GB/T 4974-2018_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 4974-2018_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 4974-2018_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 4974-2018?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 4974-2018 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
