Path: Home > GB/T > Page202 > GB/T 46192.2-2025

Price & Delivery

US$359.00 · In stock · Download in 9 seconds
GB/T 46192.2-2025: Test methods for liquid crystal alignment layers - Part 2: Film properties
Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure
Status: Valid

Std ID	Version	USD	Buy	Deliver [PDF] in	Title (Description)
GB/T 46192.2-2025	English	359	Add to Cart	4 days [Need to translate]	Test methods for liquid crystal alignment layers - Part 2: Film properties

GB/T 46192.2-2025: Test methods for liquid crystal alignment layers - Part 2: Film properties

---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT46192.2-2025
ICS 31.030 CCSL90 National Standards of the People's Republic of China Test methods for liquid crystal alignment films Part 2.Film Forming Properties Part 2.Film properties Published on 2025-10-05 Implemented on May 1, 2026 State Administration for Market Regulation The State Administration for Standardization issued a statement.

Table of Contents

Preface III Introduction IV 1.Scope 1 2 Normative References 1 3.Terms and Definitions 1 4 Transmittance 1 5.Refractive index 2 6.Film surface hardness 3 7.Volume resistivity 3 8.Relative permittivity, dielectric loss 5. 9.Thermal decomposition temperature 6 10 Glass transition temperature 7 11.Water absorption rate 8 12 Test Report 9 References 10

Foreword

This document complies with the provisions of GB/T 1.1-2020 "Standardization Work Guidelines Part 1.Structure and Drafting Rules of Standardization Documents". Drafting. This document is Part 2 of GB/T 46192, "Test Methods for Liquid Crystal Alignment Films". GB/T 46192 has already published the following parts. ---Part 1.Physical and Chemical Properties; ---Part 2.Film-forming properties; ---Part 3.Photoelectric properties. Please note that some content in this document may involve patents. The issuing organization of this document assumes no responsibility for identifying patents. This document was proposed and is under the jurisdiction of the National Technical Committee on Standardization of Semiconductor Equipment and Materials (SAC/TC203). This document was drafted by. Shenzhen Dalton Electronic Materials Co., Ltd., China Electronics Technology Standardization Institute, and Changsha Dalton. Electronic Materials Co., Ltd., Nanxiong Yihao Chemical Co., Ltd., Guangzhou Huaxing Optoelectronic Technology Co., Ltd., Shenzhen Zhengtong Renhe Technology Co., Ltd. company. The main drafters of this document are. Xu Seqiang, Wu Yiran, Li Jinhua, Zhao Junsha, Nie Yonghui, Cao Kewei, Huang Xuerun, Shi Zeyuan, and Zhang Baoshuai. Guo Guihua.

introduction

Liquid crystal alignment film is an important component of liquid crystal display devices, which has the function of adjusting the alignment direction and distribution of liquid crystal molecules in the liquid crystal display. The effect of intensity. Its effect on liquid crystal displays needs to be characterized using specific testing methods. To meet the needs of my country's development, research, manufacturing, inspection, and import/export trade of liquid crystal alignment film products, this paper formulates liquid crystal alignment film... A series of standards for test methods. GB/T 46192 "Test Methods for Liquid Crystal Alignment Films" is proposed to consist of the following three parts. ---Part 1.Physicochemical Properties. This section describes the standard test conditions and methods for the physicochemical properties of liquid crystal alignment film solutions. ---Part 2.Film Formation Performance. This section describes the standard test conditions and methods for assessing the film formation performance of liquid crystal alignment films. ---Part 3.Photoelectric Properties. This section describes the standard test conditions and methods for the photoelectric properties of liquid crystal alignment films. Test methods for liquid crystal alignment films Part 2.Film Forming Properties 1.Scope This document describes the transmittance, refractive index, surface hardness, volume resistivity, relative permittivity, and dielectric constant of liquid crystal alignment films used in liquid crystal displays. Test methods for mass loss, thermal decomposition temperature, glass transition temperature and water absorption rate. This document applies to the research, development, production, testing, and application verification of liquid crystal alignment films for liquid crystal displays.

2 Normative references

The contents of the following documents, through normative references within the text, constitute essential provisions of this document. Dated citations are not included. For references to documents, only the version corresponding to that date applies to this document; for undated references, the latest version (including all amendments) applies. This document. GB/T 6739-2022 Determination of Hardness of Paints and Varnishes by Pencil Method GB/T 26497-2022 Electronic Balance GB/T 26798-2011 Single-beam ultraviolet-visible spectrophotometer GB/T 37631-2019 Test Method for Thermal Decomposition Temperature of Chemical Fibers GB/T 46192.1 Test methods for liquid crystal alignment films - Part 1.Physicochemical properties 3.Terms and Definitions The terms and definitions defined in GB/T 46192.1 and the following terms and definitions apply to this document. 3.1 Surface hardness The ability of liquid crystal alignment films to resist scratches or inhibit the formation of other surface defects. 3.2 waterabsorptionratiowaterabsorptionratio The ratio of the mass of water absorbed by the liquid crystal alignment film to the total mass after water absorption. 4.Transmission rate 4.1 Principle The luminous flux of the sample and the luminous flux transmitted through the air were measured using a UV-Vis spectrophotometer, and the luminous flux of the sample and the luminous flux transmitted through the air were calculated. The ratio of flux to transmittance is used to obtain the transmittance. 4.2 Instruments and Equipment The instrument meets the following requirements. a) Measuring instrument. Ultraviolet-visible spectrophotometer. ...