GB/T 45631-2025 English PDF

US$219.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 45631-2025: Requirements for flying management information of surveying and mapping with unmanned aircraft system(UAS)
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 45631-2025	219	Add to Cart	3 days	Requirements for flying management information of surveying and mapping with unmanned aircraft system(UAS)	Valid

Similar standards

GB/T 36299   GB/T 18314   GB/T 12898   GB/T 45522   GB/T 45632   

Basic data

Standard ID: GB/T 45631-2025 (GB/T45631-2025)
Description (Translated English): Requirements for flying management information of surveying and mapping with unmanned aircraft system(UAS)
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: A77
Classification of International Standard: 07.040
Word Count Estimation: 10,145
Date of Issue: 2025-04-25
Date of Implementation: 2025-08-01
Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration

GB/T 45631-2025: Requirements for flying management information of surveying and mapping with unmanned aircraft system (UAS)

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Requirements for flying management information of surveying and mapping with unmanned aircraft system(UAS) UAV remote sensing and mapping flight management information requirements Requirements for flying management information of surveying and mapping with unmanned aircraft system (UAS) ICS 07.040 CCS A 77 National Standard of the People's Republic of China Released on 2025-04-25 2025-08-01 Implementation State Administration for Market Regulation The National Standardization Administration issued

Table of contents

Preface ... Ⅲ 1 Scope ... 1 2 Normative references ... 1 3 Terms and Definitions ... 1 4 Flight management information content ... 1 5 Flight management information transmission requirements 2 5.1 Transmission method ... 2 5.2 Transport Protocol ... 2 5.3 Transmission frequency ... 2 5.4 Transmission Delay ... 3 5.5 Resuming downloads ... 3 References ... 4

Foreword

This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents" Drafting is required. Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents. This document is proposed by the Ministry of Natural Resources of the People's Republic of China. This document is under the jurisdiction of the National Technical Committee on Geographic Information Standardization (SAC/TC 230). This document was drafted by. China Surveying and Mapping (Beijing) Remote Sensing Technology Co., Ltd., Wuhan China Surveying and Mapping Remote Sensing Technology Co., Ltd., Sichuan Zhongce Tianxiang Remote Sensing Technology Co., Ltd., National Basic Geographic Information Center, Second Research Institute of the Civil Aviation Administration of China, Beijing Construction University of Architecture and Geoinformation, Chinese Academy of Surveying and Mapping (National Engineering Research Center for Surveying and Mapping). The main drafters of this document are. Li Yingcheng, Xue Yanli, Li Xilin, Liu Fei, Zheng Anwu, Ren Yafeng, Yang Jie, Bi Kai, Zhao Junxia, Ren Yanxu, Zhang Jianping, Zou Xiang, Li Yin, Ma Li, Xiang Jie, Miao Qiang, Li Changke. UAV remote sensing and mapping flight management information requirements

1 Scope

This document specifies the content and transmission requirements for UAV remote sensing mapping flight management information. This document applies to the flight status supervision of UAV remote sensing systems.

2 Normative references

The contents of the following documents constitute the essential clauses of this document through normative references in this document. For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies. in this document. GB/T 41300 Unique product identification code for civil unmanned aerial vehicles

3 Terms and definitions

The following terms and definitions apply to this document. 3.1 unmanned aircraft system; UAS The unmanned aircraft shall be the main part, equipped with the relevant remote control station, the required command and control links and any other parts specified in the design. A group of devices that can complete a specific task. 3.2 UAS remote sensing system An unmanned aerial vehicle system equipped with remote sensing sensors and engaged in aerial remote sensing activities. Note. The UAV remote sensing system referred to in this document has an empty mass less than or equal to 116 kg and a take-off weight less than or equal to 150 kg. 3.3 UAS flying data The longitude, latitude, altitude, speed, direction and other relevant information of the UAV system flight.

4 Flight management information content

When using UAV remote sensing systems to perform UAV remote sensing mapping tasks, the UAV remote sensing system should be reported to the national air traffic management leadership organization for coordinated construction. The integrated supervision service platform for manned aircraft transmits flight management information in real time. Flight management information includes regulatory identification information and flight status information, see Table 1 for details. The time is Beijing time, the longitude and latitude are in WGS84 coordinate system, and the altitude is satellite-based altitude. Table 1 Flight management information Classification information item description Regulatory knowledge Other information Drone only Product Identification Code The unique product identification code of the drone is in accordance with GB/T 41300 ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 45631-2025_English be delivered?

Answer: Upon your order, we will start to translate GB/T 45631-2025_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 45631-2025_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 45631-2025_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.