Path: Home > GB/T > Page93 > GB/T 44581-2024

Price & Delivery

US$674.00 · In stock · Download in 9 seconds
GB/T 44581-2024: Automatic floor treatment machines for commercial use - Particular requirements
Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure
Status: Valid

Std ID	Version	USD	Buy	Deliver [PDF] in	Title (Description)
GB/T 44581-2024	English	674	Add to Cart	5 days [Need to translate]	Automatic floor treatment machines for commercial use - Particular requirements

GB/T 44581-2024: Automatic floor treatment machines for commercial use - Particular requirements

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS 97.080 CCSY62 National Standard of the People's Republic of China Special requirements for commercial autonomous floor treatment machines (IEC 63327.2021, IDT) Released on 2024-09-29 2024-09-29 implementation State Administration for Market Regulation The National Standardization Administration issued

Table of Contents

Preface III 1 Scope 1 2 Normative references 2 3 Terms and Definitions 2 4 General requirements 5 5 General conditions for testing 5 6 Starting of electric appliances 5 7 Stability and mechanical hazards 5 8 Structure 8 Appendix 10 Appendix FF (Normative) Additional requirements for autonomous floor treatment machines without manual mode 11 Annex GG (normative) Requirements for charging stations for commercial autonomous floor treatment machines 13 Appendix HH (Normative) Requirements for avoiding siphoning of charging stations 21 Appendix II (Informative) Charging Station Noise 22 Appendix JJ (Informative) Alternative methods for implementing safety-critical functions 24 Reference 25

Foreword

This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents" Drafting. This document is equivalent to IEC 63327.2021 "Particular requirements for commercial autonomous floor treatment machines". The following minimal editorial changes were made to this document. --- Deleted the informative statements about other national standards in Chapter 1 of IEC 63327.2021. Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents. This document was proposed by China Light Industry Federation. This document is under the jurisdiction of the National Technical Committee for Standardization of Household Electrical Appliances (SAC/TC46). This document was drafted by. China Household Electrical Appliance Research Institute, Haibo (Suzhou) Robotics Technology Co., Ltd., Ecovacs Robotics Co., Ltd. Company, Jiangsu Midea Cleaning Appliance Co., Ltd., Haier Robotics Technology (Qingdao) Co., Ltd., China Institute of Home Furnishing (Beijing) Testing and Certification Co., Ltd. Company, Centre Testing International Group Co., Ltd. The main drafters of this document. Wang Kun, Qu Weixin, Zhou Wei, Zhou Lei, Liu Chao, Wang Xuan, Jiao Limin, Liu Panchao and Wu Meng. Special requirements for commercial autonomous floor treatment machines

1 Scope

This document applies to the safety of electrically powered autonomous floor treatment machines intended for indoor commercial use involving the following uses on floors. ---cleaning; ---scrub; ---Wet or dry dust removal; ---polishing; --- Use of waxing, sealing products and powdered detergents; ---Wash with detergent. In addition to the applicable requirements of IEC 60335-2-72, the requirements of this document apply to commercial floor treatment machines. For autonomous floor treatment machines specially designed for wet or dry vacuuming, additional or modified requirements of IEC 60335-2-69 apply. The machines covered by this document may be operated in automatic or manual mode. For autonomous floor treatment machines without manual mode, Appendix FF of this document gives the modification requirements. Autonomous floor treatment machines covered by this document are designed to avoid hazardous contact with persons in the application environment. Autonomous floor treatment machines may need to operate in close proximity to large numbers of people, such as shopping malls and schools. In this document "Machine" means an autonomous floor treatment machine. Contains the following power systems. ---Powered by a rechargeable battery charged by a built-in battery charger or an external battery charger, which can be integrated in the machine circuit or installed on the machine and assembled in the automatic floor treatment machine housing; or by batteries that need to be removed and charged by an external charger powered by; ---Other systems are under development. This document does not apply to. ---Household vacuum cleaners, water suction cleaning appliances and automatic battery-powered vacuum cleaners (GB/T 4706.7); ---Household floor treatment machines and wet scrubbers (GB/T 4706.57); ---Battery charger (GB/T 4706.18); ---Commercial floor treatment machines (GB/T 4706.86); --- Commercial spray extraction machine (GB/T 4706.87); ---Road sweeper; --- Machines designed for use on slopes with a gradient exceeding 20%; ---Machines equipped with a power take-off (PTO); --- Machines designed for use in corrosive or explosive environments (such as dust, steam or gas); --- Machines designed for use in vehicles, vessels or aircraft; --- Vacuum cleaners designed to absorb combustible dust; ---Medical devices (GB 9706.1); --- Unmanned industrial trucks and their systems (ISO 3691-4); --- Safety requirements for robots and robotic equipment Personal assistant robots (GB/T 36530); --- Machines with parts extending outside the contact zone of the machine; NOTE 101.Machine parts operating outside the contact zone may be evaluated differently. ...