GB/T 4269.4-2014 English PDF

US$514.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 4269.4-2014: Tractors, machinery for agriculture and forestry, powered lawn and garden equipment -- Symbols for operator controls and other displays -- Part 4: Symbols for forestry machinery
Status: Valid

GB/T 4269.4: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 4269.4-2014	514	Add to Cart	3 days	Tractors, machinery for agriculture and forestry, powered lawn and garden equipment -- Symbols for operator controls and other displays -- Part 4: Symbols for forestry machinery	Valid
GB/T 4269.4-2006	919	Add to Cart	4 days	Forestry machinery -- Symbols for operator controls and other displays	Obsolete

Similar standards

GB 10395.1   GB 16151.1   GB 10395.8   GB/T 4269.2   GB/T 5263   GB/T 5667   

Basic data

Standard ID: GB/T 4269.4-2014 (GB/T4269.4-2014)
Description (Translated English): Tractors, machinery for agriculture and forestry, powered lawn and garden equipment -- Symbols for operator controls and other displays -- Part 4: Symbols for forestry machinery
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: B90
Classification of International Standard: 65.060.80
Word Count Estimation: 26,232
Date of Issue: 9/3/2014
Date of Implementation: 3/1/2015
Older Standard (superseded by this standard): GB/T 4269.4-2006
Quoted Standard: ISO 3461-1-1988; ISO 3767-1; ISO 4196; ISO 6814; ISO 7000; IEC 417
Adopted Standard: ISO 3767-4-1993, IDT
Regulation (derived from): People's Republic of China Announcement of Newly Approved National Standards No. 21 of 2014
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This Standard specifies, as defined in ISO 6814 forestry machinery operator control symbols and other marks. Symbols This section gives marks and other applicable Feller, Grapple skidder and timber loaders, also applies to the special chain saws, balancin

GB/T 4269.4-2014: Tractors, machinery for agriculture and forestry, powered lawn and garden equipment -- Symbols for operator controls and other displays -- Part 4: Symbols for forestry machinery

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Tractors, machinery for agriculture and forestry, powered lawn and garden equipment Symbols for operator controls and other displays Part 4. Symbols for forestry machinery ICS 65.060.80 B90 National Standards of People's Republic of China Replacing GB/T 4269.4-2006 Tractors and machinery for agriculture and forestry, powered lawn and garden machinery The operator controls and other displays - Symbols Part 4. Symbols forestry machinery Tractors, machineryforagricultureandforestry, poweredlawnand Part 4. Symbolsforforestrymachinery (ISO 3767-4.1993, IDT) Issued on. 2015-03-01 2014-09-03 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

GB/T 4269 "Tractors and machinery for agriculture and forestry, powered lawn and garden machinery operator controls and other displays symbol" Divided into five parts. --- Part 1. Common symbols; --- Part 2. Symbols for agricultural tractors and machinery; --- Part 3. powered lawn and garden machinery symbols; --- Part 4. Symbols forestry machinery; --- Part 5. Portable forestry machinery symbols. This section GB/T 44269 Part of. This section drafted in accordance with GB/T 1.1-2009 given rules. This Part replaces GB/T 4269.4-2006 "forestry machinery operator control symbols and other marks", and GB/T 4269.4- Compared to 2006, the main technical changes are as follows. --- Changing the name of the standard, the original standard name "forestry machinery operator control symbols and other marks" to "agricultural and forestry tractors And machinery, lawn and garden equipment operator controls and other displays - Symbols - Part 4. forestry machinery Symbol ", and modify the corresponding English name; --- According to GB/T 1.1-2009 requirements, modify the content of the normative reference document and the corresponding modification of the standard text content (See Chapter 2, Chapter 2, 2006 edition); --- In the "log gripper device symbol" added wood feed rollers - roller increased clamping force, logs feed roll - rotating rollers gradually, Wood symbol length (see 10.18,10.19,10.20); --- Added "dozer symbol" "stacker Blade symbol" "bogie symbol" chapters of this content (see Chapter 19, Chapter 20, para. Chapter 21). This section uses the translation method identical with the international standard ISO 3767-4.1993 "Tractors and machinery for agriculture and forestry, powered lawn and garden machinery The operator controls and other displays - Symbols - Part 4. Symbols forestry machinery ", while incorporating the ISO 3767-4. 1993/Amd.1.2000 and ISO 3767-4.1993/Amd.2.2008. And in this section the normative international documents cited correspondence between consistency of the following documents. --- GB/T 1252-1989 arrow graphic symbol and its application (idt ISO 4196. 1984) --- GB/T 4269.1-2001 agricultural and forestry tractors and machinery, lawn and garden equipment operator controls and other significant A display device using the symbols - Part 1. Common symbols (idt ISO 3767-1.1991) --- GB/T 16273.1-2008 equipment - Graphical symbols - Part 1. Common symbols (ISO 7000.2004, NEQ) --- GB/T 19365-2012 forestry machinery mobile and self-propelled forestry machinery - Terms, definitions and classifications (ISO 6814. 2009, IDT) This part by the State Forestry Administration. This part of the National Forestry Machinery Standardization Technical Committee (SAC/TC61) centralized. This section is responsible for drafting unit. Harbin Forestry Machinery Research Institute of the State Forestry Administration. Participated in the drafting of this section. Ningbo Daye Power Machinery Co., Ltd., Jiangsu Golden stalk Agricultural Equipment Co., Ltd., the Ministry of Agriculture, Nanjing Agricultural Mechanization Institute. The main drafters of this section. Fan winter temperature, BEI Fan, Wu Zhiqiang, Tang kept dry, Zhu Wenyong, Chenwan Ren, Zhang Li steel, Yang Xuefeng. This section was first released in July 2006, this is the first revision. Tractors and machinery for agriculture and forestry, powered lawn and garden machinery The operator controls and other displays - Symbols Part 4. Symbols forestry machinery

1 Scope

GB/T 4269 provisions of this section, as defined in ISO 6814 forestry machinery operator control symbols and other marks. Symbols and other marks given in this section applies to Feller, Grapple skidder and timber loaders, but also for special chain Saws, balancing support means and winch. NOTE. preface lists GB/T 4269 in other parts, which can be found in other specific symbol machinery and apparatus.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. ISO 3461-1. 1988 to develop general principles for graphical symbols - Part 1. Graphical symbols for equipment (Generalprinciplesfor thecreationofgraphicalsymbols-Part 1. Graphicalsymbolsforuseonequipment) ISO 3767-1 Tractors, machinery for agriculture and forestry, powered lawn and garden machinery operator controls and other displays - Symbols Part 1. Common symbols (Tractors, machineryforagricultureandforestry, poweredlawnandgarden equipment-Symbolsforoperatorcontrolsandotherdisplays-Part 1. Commonsymbols) ISO 4196 Graphical symbols arrow Applications (Graphicalsymbols-Useofarrows) ISO 6814 self-propelled forestry machinery forestry machinery Classification vocabulary (Machineryforforestry-Mobileandself-pro- peledmachinery-Identificationvocabulary) ISO 7000 Graphical symbols for equipment - Index and synopsis (Graphicalsymbolsforuseonequipment-Indexand synopsis) Index IEC 417 devices with graphical symbols for a single chart, presentation, editing and additions (Graphicalsymbolsforuseon equipment-Index, surveyandcompilationofthesinglesheets)

3 Terms and Definitions

As defined in ISO 3767-1 defined symbols apply to this document.

4 General

See Tables 4.1 each symbol. In addition to each symbol listed in the table and the combination of symbols in the selected number of individual symbols, other symbols may be real Coloring purposes, the purpose is to improve the clarity and replication operator's visual effects. 4.2 Restricted reproduction and replication technology, allowing to deepen the lines symbol or symbols to make minor changes, but keep the basic symbol Graphic element unchanged, and the operator can easily identify. 4.3 In order to improve the appearance and visual effects or signs to be coordinated with the design of the machine, allowing the line to change the sign or the color depth of character Horn rounding. Each symbol while maintaining its basic elements and characteristics of the same, may have some changes, see ISO 3461-1. 1988's ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 4269.4-2014_English be delivered?

Answer: Upon your order, we will start to translate GB/T 4269.4-2014_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 4269.4-2014_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 4269.4-2014_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 4269.4-2014?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 4269.4-2014 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.