GB/T 39832-2021 English PDF

US$114.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 39832-2021: Gardening machinery - Powered material-collecting systems - Safety
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 39832-2021	114	Add to Cart	3 days	Gardening machinery - Powered material-collecting systems - Safety	Valid

Similar standards

GB/T 24674   GB/T 33006   GB/T 25409   GB/T 32250.5   GB/T 45789   

Basic data

Standard ID: GB/T 39832-2021 (GB/T39832-2021)
Description (Translated English): Gardening machinery - Powered material-collecting systems - Safety
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: B91
Word Count Estimation: 6,678
Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration

GB/T 39832-2021: Gardening machinery - Powered material-collecting systems - Safety

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Gardening machinery - Powered material-collecting systems - Safety ICS 65.060.70 B91 National Standards of People's Republic of China Safety of material power collection device for gardening machinery (ISO 21628.2008, IDT) Released on 2021-03-09 2021-10-01 implementation State Administration of Market Supervision and Administration Issued by the National Standardization Management Committee

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009. The translation method used in this standard is equivalent to ISO 21628.2008 "Safety of Garden Machinery Material Power Collection Device". The Chinese documents that have a consistent correspondence relationship with the normatively cited international documents in this standard are as follows. GB/T 1593-2015 Agricultural wheeled tractor rear-mounted three-point suspension device 0, 1N, 1, 2N, 2, 3N, 3, 4N and 4 categories (ISO 730.2009, MOD) GB/T 3766-2015 General rules and safety requirements for hydraulic transmission systems and their components (ISO 4413.2010, MOD) GB/T 9480-2001 Rules for the compilation of manuals for agricultural and forestry tractors and machinery, lawn and garden power machinery (eqv, ISO 3600.1996) GB 10396-2006 General rules for safety signs and hazard graphics for agricultural and forestry tractors and machinery, lawn and garden power machinery (ISO 11684.1995, MOD) GB/T 16855.1-2018 Safety-related components of machinery safety control system Part 1.General design rules (ISO 13849-1. 2015, IDT) GB/T 20343-2016 The connecting device of agricultural tractors and machinery three-point suspension implements The clearance range around the implements (ISO 2332.2009, IDT) This standard was proposed by the China Machinery Industry Federation. This standard is under the jurisdiction of the National Agricultural Machinery Standardization Technical Committee (SAC/TC201). This standard was drafted. China Academy of Agricultural Mechanization Sciences, Jiangsu University, Zhejiang Danong Industrial Co., Ltd. The main drafters of this standard. Zhao Liwei, Ye Li, Zhao Qingliang, Sudan, Shen Yaru, Xiang Zhongping, Wang Hongren.

Introduction

The structure of safety standards in the machinery sector is as follows. 1) Type A standards (safety basic standards), giving the basic concepts, design principles and general characteristics applicable to all machinery. 2) Class B standard (safety general standard), involving one (or more) safety features or one (or more) types of machinery with a wide range of use The safety protection device. ---B1 category, specific safety features (such as safety distance, surface temperature and noise) standards; ---B2 category, safety devices (such as two-hand control devices, interlocking devices, pressure-sensitive devices and protective devices) standards. 3) Type C standards (mechanical safety standards), which involve detailed safety requirements for a specific machine or a group of machines. This standard belongs to the Type C standard specified by ISO 12100-1. If the provisions of this Type C standard are different from those of the Type A or Type B standards, the design and manufacturing shall be carried out in accordance with the provisions of this Type C standard. If the machine is installed, the provisions of this C-type standard shall be implemented in priority. The scope of this standard gives the machinery involved and the degree of danger, dangerous state and dangerous event. Power collection of materials The dangers of the collection device are clear. Safety of material power collection device for gardening machinery

1 Scope

This standard gives the safety requirements for the design and structure of material power collection devices used for agriculture, horticulture and regional maintenance (landscaping). Summation method. This standard applies to suspended, semi-suspended or traction machinery for gardening. This standard specifies methods for eliminating and reducing mechanical hazards when the material collection system is used as intended. This standard does not involve environmental hazards, road safety, electromagnetic compatibility, power output shafts (PTO), power output drive shaft protection devices or Control requirements.

2 Normative references

The following documents are indispensable for the application of this document. For dated reference documents, only the dated version applies to this article Pieces. For undated reference documents, the latest version (including all amendments) is applicable to this document. ISO 730-1 Rear-mounted three-point suspension for agricultural wheeled tractors-Part 1.Categories 1, 2, 3 and 4 (Agricultural wheeledtractors-Rear-mountedthree-pointlinkage-Part 1.Categories1,2,3and4) ISO 2332 The gap range on the coupling device of the three-point suspension implements of agricultural tractors and machinery (Agricultural tractorsandmachinery-Connectionofimplementsviathree-pointlinkage-Clearancezonearound implement) ISO 3600 Rules for the compilation of manuals for agricultural and forestry tractors and machinery, lawn and garden power machinery (Tractors, machinery foragricultureandforestry,poweredlawnandgardenequipment-Operator'smanuals-Contentand presentation) ISO 4413 General rules for hydraulic transmission systems (Hydraulicfluidpower-Generalrulesrelatingtosys- tems) ISO 11684 Agriculture and forestry tractors and machinery, lawn and garden power machinery safety signs and general rules for hazard graphics (Tractors, machineryforagricultureandforestry,poweredlawnandgardenequipment-Safetysignsandhazard pictorials-Generalprinciples) ISO 12100-1.2003 General Principles of Mechanical Safety Basic Concepts and Design Part 1.Basic Terms and Methods (Safetyofma- chinery-Basicconcepts,generalprinciplesfordesign-Part 1.Basicterminology,methodology) ISO 13849-1 Safety related components of machinery safety control system Part 1.Design general (Safetyofmachinery- Safety-relatedpartsofcontrolsystems-Part 1.Generalprinciplesfordesign) ISO 13852..1996 Safety distance of machinery to prevent upper limbs from reaching the danger zone (Safetyofmachinery-Safetydis- tancestopreventdangerzonesbeingreachedbytheupperlimbs)

3 Terms and definitions

The following terms and definitions apply to this document. 3.1 Material-colectingsystem A suspended, semi-suspended or towed machine that uses a fan to generate a vacuum to collect grass and leaves. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 39832-2021_English be delivered?

Answer: Upon your order, we will start to translate GB/T 39832-2021_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 39832-2021_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 39832-2021_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.