GB/T 39818-2021 English PDF

US$119.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 39818-2021: Plastics - Thermosetting moulding materials - Determination of shrinkage
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 39818-2021	119	Add to Cart	3 days	Plastics - Thermosetting moulding materials - Determination of shrinkage	Valid

Similar standards

GB/T 39715.1   GB/T 39827.1   GB/T 39690.1   GB/T 39821   GB/T 39812   

Basic data

Standard ID: GB/T 39818-2021 (GB/T39818-2021)
Description (Translated English): Plastics - Thermosetting moulding materials - Determination of shrinkage
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: G31
Word Count Estimation: 6,666
Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration

GB/T 39818-2021: Plastics - Thermosetting moulding materials - Determination of shrinkage

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Plastics - Thermosetting moulding materials - Determination of shrinkage ICS 83.080.10 G31 National Standards of People's Republic of China Determination of shrinkage of plastic thermosetting molding materials (ISO 2577.2007, MOD) Released on 2021-03-09 2021-10-01 implementation State Administration of Market Supervision and Administration Issued by the National Standardization Management Committee

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard uses the redrafting method to modify and adopt ISO 2577.2007 "Determination of shrinkage of plastic thermoset molding materials". The technical differences between this standard and ISO 2577.2007 and the reasons are as follows. --- Regarding normative reference documents, this standard has made adjustments with technical differences to adapt to my country's technical conditions and adjustments. The situation is collectively reflected in Chapter 2 "Normative Reference Documents", and the specific adjustments are as follows. ● Replace ISO 295.2004 with GB/T 5471 which is equivalent to adopting international standards; ---In order to control the accuracy of temperature, increased the requirements of the oven (see 4.3). This standard was proposed by the China Petroleum and Chemical Industry Federation. This standard is under the jurisdiction of the Thermosetting Plastics Subcommittee of the National Plastics Standardization Technical Committee (SAC/TC15/SC11). Drafting organizations of this standard. Shanghai Fuchen Chemical Co., Ltd., Changzhou Tianma Group Co., Ltd. Group) Co., Ltd., Shenzhen Zhongan Testing Standard Technology Co., Ltd., Liyang Qiaosen Plastic Co., Ltd., CGN Ruishengfa (Xiamen) New Materials Co., Ltd., Zhejiang Huafeng New Materials Co., Ltd., Zhejiang Chennuo Polymer Materials Co., Ltd., Changshu Southeast Plastic Co., Ltd., Guilin Zhilong Electrical Equipment Co., Ltd., Shanghai Eurasian Synthetic Material Co., Ltd., Shaxian Hongsheng Plastic Co., Ltd., Nantong Tianhe Resin Co., Ltd. The company, Shandong Institute of Non-metallic Materials, Jiangmen Xinhui Henglong Home Furnishing Innovation Co., Ltd. The main drafters of this standard. Lu Shiping, Xuan Weidong, Peng Bin, Lu Zio, Jing Fajun, Chen Ruifu, Zhu Yunchao, Li Xiangjie, Li Jun, Wei Wei, Pan Dongming, Mu Lin, Chen Yingui, He Wei, Zhang Xia, Nie Huayao, Lu Qi, Wu Cong. Determination of shrinkage of plastic thermosetting molding materials

1 Scope

This standard specifies a method for measuring the shrinkage of thermosetting molding material samples and the shrinkage after heat treatment. These characteristics are useful for the production control of thermosetting materials and the inspection of production uniformity. In addition, understand the initial Shrinkage is very important to the structure of the mold, and understanding the post-shrinkage is important to determine whether the molding material is suitable for the manufacture of molded parts with precise dimensions. This standard applies to thermoset molding materials.

2 Normative references

The following documents are indispensable for the application of this document. For dated reference documents, only the dated version applies to this article Pieces. For undated reference documents, the latest version (including all amendments) is applicable to this document. GB/T 5471 Compression molding of plastic thermosetting plastic samples (GB/T 5471-2008, ISO 295.2004, IDT) ISO 10724-1 Injection molding (PMCs) of test specimens of plastic powdered thermosetting molding compounds-Part 1.General principles and more Use of sample preparation [Plastics-Injectionmouldingoftestspecimensofthermosettingpowdermoulding compounds(PMCs)-Part 1.Generalprinciplesandmouldingofmultipurposetestspecimens] ISO 10724-2.1998 Injection molding of test specimens of plastic powdered thermosetting molding compounds (PMCs) Part 2.Small plates [Plastics-Injection mouldingoftestspecimensofthermosettingpowder mouldingcompounds (PMCs)-Part 2.Smalplates]

3 Terms and definitions

The following terms and definitions apply to this document. 3.1 Molding shrinkage At room temperature, measure the difference between the dimensions of the molded part and the cavity. 3.2 Post-shrinkage After the molded product is formed, the shrinkage during post-processing, storage or use.

4 Instruments

4.1 Moulds, presses, etc., are suitable for the sample preparation specified in Chapter 6.Compression molding should use single-cavity or multi-cavity non-overflow or semi-overflow 式模。 Type mold. Injection molding should use ISO 10724-2.1998 in Chapter 4 that can produce 60mm×60mm×2mm specimens D2 type ISO mold. If necessary, marks can be engraved on the mold near the two ends of the sample to accurately measure the length of the cavity and the sample. Note. If you use a multi-cavity non-overflow mold, the change in sample density may produce different shrinkage. 4.2 Measuring tool, suitable for measuring the length of the sample and the length of the corresponding mold cavity, and its accuracy should not be less than 0.02mm. 4.3 Oven (only used for post-shrinkage detection), using a blast drying oven, should have an appropriate controllable temperature range, and the temperature control accuracy should be ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 39818-2021_English be delivered?

Answer: Upon your order, we will start to translate GB/T 39818-2021_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 39818-2021_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 39818-2021_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.