GB/T 39690.1-2020 PDF EnglishUS$105.00 · In stock · Download in 9 seconds
GB/T 39690.1-2020: Plastics - Mixtures of polypropylene (PP) and polyethylene (PE) recyclate derived from PP and PE used for flexible and rigid consumer packaging - Part 1: Designation system and basis for specification Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure Status: Valid
Similar standardsGB/T 39690.1-2020: Plastics - Mixtures of polypropylene (PP) and polyethylene (PE) recyclate derived from PP and PE used for flexible and rigid consumer packaging - Part 1: Designation system and basis for specification---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT39690.1-2020 GB NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 83.080.20 G 31 GB/T 39690.1-2020 / ISO 18263-1:2015 Plastics - Mixtures of polypropylene (PP) and polyethylene (PE) recyclate derived from PP and PE used for flexible and rigid consumer packaging - Part 1: Designation system and basis for specification (ISO 18263-1:2015, IDT) ISSUED ON: DECEMBER 14, 2020 IMPLEMENTED ON: JULY 01, 2021 Issued by: State Administration for Market Regulation; Standardization Administration of the PRC. Table of ContentsForeword ... 3 1 Scope ... 5 2 Normative references ... 6 3 Designation system ... 6 4 Examples of designations ... 9ForewordGB/T 39690 "Plastics - Mixtures of polypropylene (PP) and polyethylene (PE) recyclate derived from PP and PE used for flexible and rigid consumer packaging" is divided into two parts: - Part 1: Designation system and basis for specification; - Part 2: Preparation of test specimens and determination of properties. This Part is Part 1 of GB/T 39690. This Part is drafted in accordance with the rules given in GB/T 1.1-2009. This Part, using translation method, is identical to ISO 18263-1:2015 "Plastics - Mixtures of polypropylene (PP) and polyethylene (PE) recyclate derived from PP and PE used for flexible and rigid consumer packaging - Part 1: Designation system and basis for specification". China’s documents which have a consistent correspondence with the international documents normatively referenced in this Part are as follows: - GB/T 1033 (all parts) Plastics - Methods for determining the density of non- cellular plastics [ISO 1183 (all parts)] - GB/T 3682.1-2018 Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method (ISO 1133-1:2011, MOD) - GB/T 39690.2-2020 Plastics - Mixtures of polypropylene (PP) and polyethylene (PE) recyclate derived from PP and PE used for flexible and rigid consumer packaging - Part 2: Preparation of test specimens and determination of properties (ISO 18263-2:2015, IDT) This Part was proposed by China Petroleum and Chemical Industry Federation. This Part shall be under the jurisdiction of National Technical Committee 15 on Plastic of Standardization Administration of China (SAC/TC 15). Drafting organizations of this Part: China Bluestar Chengrand Chengdu Testing Technology Co., Ltd., Qingdao Product Quality Supervision and Testing Research Institute, Anhui Glant Advanced Material Co., Ltd., Guangzhou Quality Supervision and Testing Institute, Beijing Center for Physical & Chemical Analysis, Dongguan Zhongnan Environmental Protection Technology Co., Ltd., Lianxingzou New Material Technology (Guangzhou) Co., Ltd. Plastics - Mixtures of polypropylene (PP) and polyethylene (PE) recyclate derived from PP and PE used for flexible and rigid consumer packaging - Part 1: Designation system and basis for specification1 ScopeThis Part of GB/T 39690 establishes the designation system and basis for specification for mixtures of polypropylene (PP) and polyethylene (PE) recyclate. It covers mixtures of polypropylene (PP) and polyethylene (PE) recyclate derived from PP and PE used for flexible and rigid consumer packaging for moulding and extrusion. Recyclate from packaging used for the transport, handling, or storage of hazardous goods shall not be used. It does not apply to mixtures of recyclates and virgin resin. It does not apply to the mixtures containing special type of PE or PP, for example, PE-UHMW, TPO, etc. The types of mixtures of PP and PE recyclate are differentiated from each other by a classification system based on appropriate levels of the designatory properties. a) Composition b) Melt mass-flow rate c) Density d) Colour It is not intended to imply that materials having the same designation give necessarily the same performance. This Part of GB/T 39690 does not provide engineering data, performance data, or data on processing conditions which may be required to specify a material for a particular application and/or method of processing. If additional properties are required, they shall be determined in accordance with the provisions of ISO 18263-2, if applicable. ......Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al. Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of English version of GB/T 39690.1-2020 be delivered?Answer: The full copy PDF of English version of GB/T 39690.1-2020 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.Question 2: Can I share the purchased PDF of GB/T 39690.1-2020_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 39690.1-2020_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 39690.1-2020 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.How to buy and download a true PDF of English version of GB/T 39690.1-2020?A step-by-step guide to download PDF of GB/T 39690.1-2020_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).Step 2: Search keyword "GB/T 39690.1-2020". Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart. Step 4: Select payment option (Via payment agents Stripe or PayPal). Step 5: Customize Tax Invoice -- Fill up your email etc. Step 6: Click "Checkout". Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively. Step 8: Optional -- Go to download PDF. Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice. See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9 |
