GB/T 39748.6-2021 English PDF

US$184.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 39748.6-2021: Urine-absorbing aids for incontinence - Test methods for characterizing polymer-based absorbent materials - Part 6: Gravimetric determination of fluid retention capacity in saline solution after centrifugation
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 39748.6-2021	184	Add to Cart	3 days	Urine-absorbing aids for incontinence - Test methods for characterizing polymer-based absorbent materials - Part 6: Gravimetric determination of fluid retention capacity in saline solution after centrifugation	Valid

Similar standards

YY/T 1680   GB/T 39381.1   YY/T 1571   GB/T 39748.7   GB/T 39748.8   GB/T 39748.11   

Basic data

Standard ID: GB/T 39748.6-2021 (GB/T39748.6-2021)
Description (Translated English): Urine-absorbing aids for incontinence - Test methods for characterizing polymer-based absorbent materials - Part 6: Gravimetric determination of fluid retention capacity in saline solution after centrifugation
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: C45
Word Count Estimation: 10,153
Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration

GB/T 39748.6-2021: Urine-absorbing aids for incontinence - Test methods for characterizing polymer-based absorbent materials - Part 6: Gravimetric determination of fluid retention capacity in saline solution after centrifugation

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Urine-absorbing aids for incontinence - Test methods for characterizingpolymer-based absorbent materials - Part 6.Gravimetric determination of fluid retention capacity in saline solution after centrifugation ICS 11.180.20 C45 National Standards of People's Republic of China Polymer matrix of urine absorption aid for incontinence Test methods for the characteristics of liquid-absorbing materials Part 6. Determination of the retention rate of normal saline after centrifugation by weighing method (ISO 17190-6.2001,IDT) Released on 2021-03-09 2021-03-09 implementation State Administration of Market Supervision and Administration Issued by the National Standardization Management Committee

Table of contents

Foreword Ⅰ Introduction Ⅱ 1 Scope 1 2 Normative references 1 3 Terms and definitions 1 4 General 1 5 Reagent 2 6 Device 2 7 Sampling 2 8 Step 2 9 Calculation 3 10 Accuracy 4 11 Inspection report 4 Appendix A (informative appendix) Centrifugal acceleration 5 Appendix B (informative appendix) Statistical results of inter-laboratory tests 6 Reference 7

Foreword

GB/T 39748 "Test Method for Characteristics of Polymer Matrix Absorbent Materials for Urine Absorption Aids for Incontinence" is divided into the following parts. ---Part 1.Determination of pH; ---Part 2.Determination of residual monomer content; ---Part 3.Determination of particle size distribution by sieving method; ---Part 4.Determination of moisture content by heating weight loss method; ---Part 5.Determine the water absorption rate by weighing method in normal saline; ---Part 6.Gravimetric method to determine the retention rate of normal saline after centrifugation; ---Part 7.Gravimetric method to determine the amount of liquid absorbed under pressure; ---Part 8.Determination of flow by weighing method; ---Part 9.Determination of density by weighing method; ---Part 10.Potentiometric titration method to determine the amount of extractable polymer; ---Part 11.Determination of the content of inhalable particles. This part is Part 6 of GB/T 39748. This section was drafted in accordance with the rules given in GB/T 1.1-2009. The translation method used in this part is equivalent to the ISO 17190-6.2001 "Characteristics of Polymer Matrix Absorbent Materials for Incontinence Urine Absorption Aids" Test methods for sex Part 6.Determination of the retention rate of normal saline after centrifugation by the weighing method". The Chinese documents that have a consistent correspondence with the international documents cited in this section are as follows. ---GB/T 10739-2002 Standard atmospheric conditions for handling and testing of paper, paperboard and pulp samples (eqvISO 187.1990); ---GB/T 6682-2008 Analytical laboratory water specifications and test methods (ISO 3696.1987, MOD); ---GB/T 6379.2-2004 Measurement method and accuracy of results (accuracy and precision) Part 2.Determine standard measurement The basic method of measurement method repeatability and reproducibility (ISO 5725-2.1994, IDT). Please note that some of the contents of this document may involve patents. The issuing agency of this document is not responsible for identifying these patents. This part was proposed by the Ministry of Civil Affairs of the People's Republic of China. This part is under the jurisdiction of the National Standardization Technical Committee for Rehabilitation and Special Equipment for the Disabled (SAC/TC148). Drafting unit of this section. National Research Center for Rehabilitation Assistive Devices. The main drafters of this section. Tao Jing, Ma Fengling, Yang Dehui.

Introduction

The GB/T 39748 series of test methods were originally formulated by the European Disposable Nonwovens Association, without technical modification, and integrated into ISO 17190 is an international standard published in 11 parts. These test methods have been used in practice for many years. According to the general standards (validity and reproducibility, etc.) of the test methods, the reliability has been measured. It has been proved that it is suitable for the detection of sodium polyacrylate superabsorbent materials used in sanitary products, including the detection of urine absorption aids for incontinent persons. Measurement. These test methods are specifically used for testing materials, and are not applicable or applicable to the testing of finished urine absorption aids. This part of GB/T 39748 is in accordance with ISO 17191 "Urine absorption aids for incontinence. Polyacrylic acid can be inhaled in the air. Highly absorbent water Material Sodium Atomic Absorption Spectrometry for the Determination of Dust in the Collection Box" is used together. Polymer matrix of urine absorption aid for incontinence Test methods for the characteristics of liquid-absorbing materials Part 6. Determination of the retention rate of normal saline after centrifugation by weighing method

1 Scope

This part of GB/T 39748 specifies a method for determining the ability of polyacrylate (PA) super absorbent powder to retain salt solution after centrifugation. method.

2 Normative references

The following documents are indispensable for the application of this document. For dated reference documents, only the dated version applies to this article Pieces. For undated reference documents, the latest version (including all amendments) is applicable to this document. ISO 187 Standard atmospheric conditions for the treatment and testing of paper, paperboard and pulp samples (Paper, boardandpulps-Standardat- mosphereforconditioningandtestingandprocedureformonitoringtheatmosphereandconditioning ofsamples) ISO 3696 Analytical laboratory water specification and test method (Waterforanalyticallaboratoryuse-Specification andtestmethods) ISO 5725-2 Measurement methods and accuracy of results (accuracy and precision) Part 2.Determination of repeatability of standard measurement methods And the basic method of reproducibility (Accuracy (trueness and precision) of measurement methods and results-Part 2.Basicmethodforthedeterminationofrepeatabilityandreproducibilityofastandardmeasurement method)

3 Terms and definitions

The following terms and definitions apply to this document. 3.1 Nonwoven Artificially manufactured flakes, nets or cotton wool, composed of regular and irregular fibers, and the fibers are friction, adhesion and bonding One or more of the forces are connected to each other. Excluding paper and products lightly woven, woven, sewn, or wet-milled by yarn, fiber, no Whether it is stitched or not. Note 1.The fiber can be natural or man-made. They can be staple fibers or continuous fibers or formed in situ. Note 2.Adapted from ISO 9092 (see reference [1]). Note 3.Refer to ISO 9092 for more details on the definition of non-woven fabrics. 3.2 Bag Non-woven fabric (3.1) bag.

4 General

After the sample is weighed, put it into the bag. The bag is immersed in the liquid, and then centrifuged according to the specified centrifugal force and time, and then measured ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 39748.6-2021_English be delivered?

Answer: Upon your order, we will start to translate GB/T 39748.6-2021_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 39748.6-2021_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 39748.6-2021_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.