GB/T 39687-2020 English PDF

US$129.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 39687-2020: Testing method for drying loss of fine ceramic powders
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 39687-2020	129	Add to Cart	3 days	Testing method for drying loss of fine ceramic powders	Valid

Similar standards

GB 34914   GB/T 38979   JC/T 2116   GB/T 39686   GB/T 39685   

Basic data

Standard ID: GB/T 39687-2020 (GB/T39687-2020)
Description (Translated English): Testing method for drying loss of fine ceramic powders
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: Q32
Classification of International Standard: 81.040.10
Word Count Estimation: 7,768
Date of Issue: 2020-12-14
Date of Implementation: 2021-07-01
Adopted Standard: ISO 17860-2014, MOD
Regulation (derived from): National Standard Announcement No. 28 of 2020
Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration
Summary: This standard specifies the principle, test device, sample preparation, test procedure, calculation of results, arbitration test method and test report for the drying loss test method of granular fine ceramic powder. This standard is applicable to the determination of drying loss of granular fine ceramic powder, and the determination of drying loss of other inorganic non-metallic powders can also be implemented by reference.

GB/T 39687-2020: Testing method for drying loss of fine ceramic powders

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
(Test method for drying loss of fine ceramic powder) ICS 81:040:10 Q32 National Standards of People's Republic of China Test method for drying loss of fine ceramic powder (ISO 17860:2014,Fineceramics(advancedceramics,advancedtechnicalceramics)- 2020-12-14 release 2021-07-01 implementation State Administration for Market Regulation Issued by the National Standardization Management Committee

Foreword

This standard was drafted in accordance with the rules given in GB/T 1:1-2009: This standard uses the redrafting method to amend and adopt ISO 17860:2014 "Fine Ceramics (Advanced Ceramics, Advanced Technical Ceramics) Ceramic Micro Determination of loss on drying of grains": Compared with ISO 17860:2014, this standard has many structural adjustments: Appendix A lists this standard and ISO 17860:2014 The chapter number comparison list: Compared with ISO 17860:2014, this standard has technical differences, and the clauses involved in these differences have been The set vertical single line (|) is marked, and a list of the corresponding technical differences and their reasons is given in Appendix B: This standard also made the following editorial changes: ---The standard name was revised to: "Test Method for Drying Loss of Fine Ceramic Powder"; ---Informative Appendix A and Appendix B have been added: This standard was proposed by the China Building Materials Federation: This standard is under the jurisdiction of the National Industrial Ceramics Standardization Technical Committee (SAC/TC194): Drafting organizations of this standard: Shandong Industrial Ceramics Research and Design Institute Co:, Ltd:, Shenzhen Shenzhongyuan Technology Co:, Ltd:, China Building Materials Inspection Certification Group Zibo Co:, Ltd: The main drafters of this standard: Wu Ping, Yang Chengshuang, Chen Ziwen, Chen Changzhu, Liu Mei: Test method for drying loss of fine ceramic powder

1 Scope

This standard specifies the principle, test equipment, sample preparation, test procedures, and results of the drying loss test method for granular fine ceramic powder Calculation, arbitration test method and test report: This standard is applicable to the determination of the drying loss of granular fine ceramic powder, and the determination of the drying loss of other inorganic non-metallic powders: Can refer to implementation:

2 Principle

The granular ceramic powder may contain water, flux, organic additives and other volatile substances: After drying at high temperature, the water and melt in the powder Agents and organic additives are removed from the granular powder to a certain extent, resulting in a certain quality loss after drying under certain conditions: powder The mass loss of the powder is divided by the initial mass of the powder before drying, and the percentage obtained is the drying loss of the powder:

3 Test device

3:1 Oven The accuracy is ±5°C: 3:2 Flat chassis Made of metal (such as tin or aluminum) with good thermal conductivity, with a diameter of about 50mm and a height of 30mm: 3:3 Balance The range is not less than 10g, and the accuracy is 0:001g: 3:4 Dryer A dryer equipped with desiccant (such as silica gel, anhydrous calcium chloride): 3:5 Moisture Analyzer The accuracy is 0:001g, with halogen or infrared heating source:

4 Sample preparation

4:1 When sampling, a sampler should be used or an equivalent method should be used to select representative samples from three different locations: 4:2 The sample should be tested in the initial state, if the sample is pretreated, it should be recorded in the report:

5 Test procedure

5:1 Oven method 5:1:1 Set the oven temperature to 110°C, put the empty flat bottom plate into the oven for drying, and the drying time is not less than 2h, then take it out and place it in a dry ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 39687-2020_English be delivered?

Answer: Upon your order, we will start to translate GB/T 39687-2020_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 39687-2020_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 39687-2020_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.