GB/T 38874.1-2020 English PDFUS$494.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 38874.1-2020: Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 1: General principles for design and development Status: Valid
Basic dataStandard ID: GB/T 38874.1-2020 (GB/T38874.1-2020)Description (Translated English): Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 1: General principles for design and development Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: B90 Classification of International Standard: 65.060.01; 35.240.99 Word Count Estimation: 26,232 Date of Issue: 2020-06-02 Date of Implementation: 2020-12-01 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 38874.1-2020: Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 1: General principles for design and development---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 1.General principles for design and development ICS 65.060.01; 35.240.99 B90 National Standards of People's Republic of China Agriculture and forestry tractors and machinery Control system safety related parts Part 1.General rules for design and development (ISO 25119-1.2018, IDT) 2020-06-02 release 2020-12-01 implementation State Administration of Market Supervision and Administration Issued by the National Standardization Management Committee ForewordGB/T 38874 "Safety Related Components for Agriculture, Forestry Tractors and Machinery Control Systems" is divided into the following 4 parts. ---Part 1.General Rules for Design and Development; ---Part 2.Concept stage; ---Part 3.Development of hardware and software series; ---Part 4.Production, operation, modification and support procedures. This part is part 1 of GB/T 38874. This section was drafted in accordance with the rules given in GB/T 1.1-2009. This part uses the translation method to be equivalent to the ISO 25119-1.2018 "Agriculture and Forestry Tractor and Machinery Control System Safety Related Department Part 1.General Principles of Design and Development. This part is proposed by China Machinery Industry Federation. This part is under the jurisdiction of the National Agricultural Machinery Standardization Technical Committee (SAC/TC201). This section was drafted by. China Yituo Group Co., Ltd., Zhonglian Heavy Machinery Co., Ltd., Henan University of Science and Technology, open unmanned farm workers Cheng Technology (Jiangsu) Co., Ltd., Jilin Agricultural Machinery Research Institute, China Agricultural Mechanization Research Institute. The main drafters of this section. Shangtan Su, Gao Yiping, Wang Gongxin, Jin Xin, Zhao Jianxiong, Pang Chunlin, Li Guangyu, Li Bo, Zhang Junning, Wang Lili, Dong Yunlei, Li Yang, Wu Zhufang, Ji Baofeng, Gao Hongfeng. Agriculture and forestry tractors and machinery Control system safety related parts Part 1.General rules for design and development1 ScopeThis part of GB/T 38874 specifies the general rules for the design and development of control system safety related components (SRP/CS). This section applies to Agricultural and forestry tractors, agricultural self-propelled machinery, agricultural full- and semi-trailer machinery, agricultural traction machinery, also suitable for municipal machinery (e.g. road cleaning Scan the machine). This section does not apply to. --- Agricultural aircraft and agricultural aircraft; ---Lawn and garden equipment. This section specifies the characteristics and categories required by SRP/CS to perform safety-related functions, but does not specify the performance for specific occasions grade. Note 1.Machinery-specific category C standards may specify agricultural performance levels (AgPL) for machinery safety-related functions within its scope. Otherwise, the AgPL specifications are made by The manufacturer is responsible. This section applies to electrical/electronic/programmable electronic system (E/E/PES) safety components related to electromechanical systems. This section covers Covers possible dangers caused by faulty behavior of E/E/PES safety-related systems (including the interaction between these systems). This section does not involve touching Electricity, fire, smoke, high temperature, radiation, toxicity, flammability, chemical reactivity, corrosion, energy release and other related hazards, unless directly by E/E/PES Caused by a safety system failure. This section also covers the failure behavior of E/E/PES safety-related systems under non-E/E/PES hazards, involving Protective measures, safeguards or safety-related functions. This section contains examples within the following scope. ---SRP/CS limits the current in the electric hybrid system to prevent insulation failure/risk of electric shock; ---SRP/CS electromagnetic interference; ---Fire protection design of SRP/CS. This section does not include examples in the following scope. --- Friction causes insulation failure due to electric shock hazard; ---Electromagnetic radiation affecting nearby machine control systems; --- Overheating caused by corrosion. This section does not apply to non-electrical/electronic/programmable electronic systems (E/E/PES) (for example. hydraulic, mechanical or pneumatic). Note 2.Refer to ISO 12100 for the design principles of machine safety. This section does not apply to safety-related components of control systems manufactured before the implementation date.2 Normative referencesThe following documents are essential for the application of this document. For dated reference documents, only the dated version applies to this article Pieces. For the cited documents without date, the latest version (including all amendments) applies to this document. GB/T 38874.2-2020 Agriculture and Forestry Tractors and Machinery Control System Safety Related Parts Part 2.Concept Stage (ISO 25119-2.2018, IDT) ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 38874.1-2020_English be delivered?Answer: Upon your order, we will start to translate GB/T 38874.1-2020_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 38874.1-2020_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 38874.1-2020_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
