GB/T 37169-2018 English PDF

US$168.00 · In stock
Delivery: <= 1 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 37169-2018: Metal mesh based PTFE strip specification and test methods
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 37169-2018	168	Add to Cart	1 days	Metal mesh based PTFE strip specification and test methods	Valid

Similar standards

GB/T 38191   GB/T 37677   GB/T 35087   GB/T 14910   GB/T 37171   

Basic data

Standard ID: GB/T 37169-2018 (GB/T37169-2018)
Description (Translated English): Metal mesh based PTFE strip specification and test methods
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: J12
Classification of International Standard: 21.100.10
Word Count Estimation: 10,175
Date of Issue: 2018-12-28
Date of Implementation: 2019-07-01
Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration

GB/T 37169-2018: Metal mesh based PTFE strip specification and test methods

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Metal mesh based PTFE strip specification and test methods ICS 21.100.10 J12 National Standards of People's Republic of China Metal woven mesh based PTFE soft tape Technical requirements and test methods Published on.2018-12-28 2019-07-01 implementation State market supervision and administration China National Standardization Administration issued

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard was proposed by the China Machinery Industry Federation. This standard is under the jurisdiction of the National Sliding Bearing Standardization Technical Committee (SAC/TC236). This standard is drafted by. Zhejiang Changsheng Sliding Bearing Co., Ltd. Participated in the drafting of this standard. Zhejiang Shuangfei Oilless Bearing Co., Ltd., Zhejiang Zhongda Precision Parts Co., Ltd., Zhongjisheng Productivity Promotion Center, Jiashan Sanfu Sliding Bearing Co., Ltd. Metal woven mesh based PTFE soft tape Technical requirements and test methods

1 Scope

This standard specifies the type and basic dimensions, product structure, technical requirements and test methods of metal woven mesh based PTFE flexible tape. This standard is applicable to the manufacture of modified polytetrafluoroethylene covered in the mesh of metal woven mesh and the surface of mesh by rolling and sintering process. A metal woven mesh-based polytetrafluoroethylene soft belt (hereinafter referred to as a soft belt).

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article. Pieces. For undated references, the latest edition (including all amendments) applies to this document. Plastics -- Determination of density of non-foam plastics -- Part 1 . Dipping method, liquid pycnometer method and titration method Determination of tensile properties of plastics - Part 5. Test conditions for uniaxial fibre reinforced composites Methods of chemical analysis of copper and copper alloys - Part 2. Determination of phosphorus content Methods of chemical analysis of copper and copper alloys - Part 10. Determination of tin content GB/T 5231-2012 Processing of copper and copper alloy grades and chemical composition

3 type and basic size

3.1 Soft belts are usually made of rectangular strips with a length of 400mm~500mm and a width of 100mm~150mm. The degree is (0.48 ± 0.02) mm. 3.2 Soft belts can be manufactured into various forms such as backing plates, gaskets, bushings, and flanged bushings according to different needs. 3.3 Softband products and products with special requirements may be separately agreed by the supplier and the buyer.

4 Product structure

The soft belt is made of tin bronze wire woven mesh, and the modified polytetrafluoroethylene is filled and covered in the mesh by rolling and sintering processes. The inner and inner surfaces are machined into soft belts of the required specifications. The modified polytetrafluoroethylene is a filling material such as polytetrafluoroethylene, fiber and molybdenum disulfide. mixture.

5 Technical requirements

5.1 Base material 5.1.1 Chemical composition The main chemical composition of the matrix should meet the requirements of GB/T 5231-2012, see Table 1. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 37169-2018_English be delivered?

Answer: Upon your order, we will start to translate GB/T 37169-2018_English as soon as possible, and keep you informed of the progress. The lead time is typically in 24 hours. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 37169-2018_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 37169-2018_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.