GB/T 35154-2017 English PDF

US$359.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 35154-2017: Test methods for ceramic tiles grouts
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 35154-2017	359	Add to Cart	4 days	Test methods for ceramic tiles grouts	Valid

Similar standards

GB/T 34549   GB 34914   GB/T 38910   GB/T 45817   GB/T 35153   

Basic data

Standard ID: GB/T 35154-2017 (GB/T35154-2017)
Description (Translated English): Test methods for ceramic tiles grouts
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: Q31
Classification of International Standard: 91.100.50
Word Count Estimation: 18,163
Date of Issue: 2017-12-29
Date of Implementation: 2018-11-01
Regulation (derived from): National Standards Bulletin 2017 No. 32
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China

GB/T 35154-2017: Test methods for ceramic tiles grouts

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Test methods for ceramic tiles grouts ICS 91.100.50 Q31 National Standards of People's Republic of China Test methods for ceramic tile sealant (ISO 13007-4..2013, Ceramictiles-Grouts and adhesives- Part 4. Testmethodsforgrouts, MOD) 2017-12-29 Posted 2018-11-01 implementation General Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China China National Standardization Administration released

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard uses the redrafted law to amend the use of ISO 13007-4..2013 "ceramic tile sealants and adhesives Part 4. Sealant Test method ". This standard and ISO 13007-4..2013 compared to the structural adjustment, Appendix A lists the standard and ISO 13007-4. 2013 reg number control list. This standard compared with ISO 13007-4..2013, there are technical differences, the provisions of these differences have been through the margin of the outer margin The vertical single line (|) at the white position is identified and a list of the corresponding technical differences and their causes is given in Appendix B. This standard also made the following editorial changes. --- In line with the current product standard name, improve the standard system, the standard name changed to "ceramic tile sealant test method"; --- Deleted ISO 13007-4..2013 in 4.1, 4.2, 4.3 and 4.4 on the standard test conditions, unified included in this standard 3.2 standard test conditions; --- Modify ISO 13007-4..2013 4.1.1.3 and 4.1.1.4 test machine and test fixture combined as the standard 4.1.1.3 content; --- Added 4.1.6.1 formula (1), 4.1.6.2 formula (2), 4.2.4 formula (3) description of the results of the instructions and units; --- Removed ISO 13007-4..2013 references. This standard proposed by the China Building Materials Federation. This standard by the National Building and Sanitary Ceramics Standardization Technical Committee (SAC/TC249) centralized. This standard was drafted. Shanghai Academy of Building Research (Group) Co., Ltd., Guangdong Hongtao Ceramics Co., Ltd., Shanghai Branch of the test Co., Ltd., Shanghai Caoyang Building Adhesive Factory, Shanghai Aidi Technology Development Co., Ltd., Guangdong Longhu Technology Co., Ltd., Germany and high (wide State Building Materials Co., Ltd., Tongji University, Beijing Institute of Building Materials Inspection Co., Ltd., China Building Materials Inspection and Certification Group Co., Ltd. Division, Shanghai Guantai Chemical Building Materials Co., Ltd. The main drafters of this standard. Zhao Min, Wang Jing, Yu Ying Fei, Yang Yimo, Yao District, Dai Xu Min, Yu Chun Guan, Luo Tianyi, Dong Fengliang, Zhang Yongming, Feng Xiuyan, Zhang Danwu, Dai Zhenping. Test methods for ceramic tile sealant

1 Scope

This standard specifies the ceramic brick sealant (hereinafter referred to as sealant) flexural strength, compressive strength, water absorption, shrinkage, wear resistance, horizontal Deformation, chemical resistance test method. This standard applies to the seams between the ceramic tile sealant performance testing.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version applies to this article Pieces. For undated references, the latest edition (including all amendments) applies to this document. GB/T 3810.6 Test methods for ceramic tiles Part 6. Determination of wear resistance of unglazed tiles (GB/T 3810.6-2016, ISO 10545-6..2010, IDT) GB/T 17671-1999 cement mortar strength test method (ISO method) (idtISO 679. 1989) JC/T 681 planetary cement mortar mixer JC/T 682 cement mortar molding test Taiwan JC/T 726 cement mortar trial mold JC/T 958 cement mortar fluidity tester (jump table)

3 General provisions

3.1 Sampling Each mix requires at least 2kg of sample. 3.2 standard test conditions The standard test conditions are temperature (23 ± 2) ℃ and relative humidity (50 ± 5)%. The wind speed of circulating air in the test area is less than 0.2m/s. except Special instructions, the test should be carried out under the conditions. If the specific test items have other test conditions, both parties can be agreed to use What kind of test conditions, but the test report should explain the details. The time deviations of the curing cycles of all the specimens shall meet the requirements in Table 1. Table 1 maintenance cycle time deviations Maintenance cycle time deviation/h 24h ± 0.5 7d ± 3 14d ± 6 21d ± 9 28d ± 12 ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 35154-2017_English be delivered?

Answer: Upon your order, we will start to translate GB/T 35154-2017_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 35154-2017_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 35154-2017_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.