Home Cart Quotation About-Us
www.ChineseStandard.net
SEARCH

GB 34914-2021 PDF English

US$185.00 · In stock · Download in 9 seconds
GB 34914-2021: Minimum allowable value of water efficiency and water efficiency grades for water purifier
Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure
Status: Valid

GB 34914: Historical versions

Standard IDUSDBUY PDFDeliveryStandard Title (Description)Status
GB 34914-2021185 Add to Cart Auto, 9 seconds. Minimum allowable value of water efficiency and water efficiency grades for water purifier Valid
GB 34914-2017279 Add to Cart 3 days Minimum allowable value of water efficiency and water efficiency grades for reverse osmosis drinking water treatment purifiers Obsolete

Similar standards

GB/T 34549   GB/T 38910   GB/T 37583   GB/T 45774.1   

GB 34914-2021: Minimum allowable value of water efficiency and water efficiency grades for water purifier


---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GB34914-2021
GB NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 91.140.70 CCS Q 31 Replacing GB 34914-2017 Minimum allowable value of water efficiency and water efficiency grades for water purifier Issued on. DECEMBER 01, 2021 Implemented on. JULY 01, 2022 Issued by. State Administration for Market Regulation; Standardization Administration of the PRC.

Table of Contents

Foreword... 3 1 Scope... 4 2 Normative references... 4 3 Terms and definitions... 4 4 Water efficiency grades for water purifier... 6 5 Technical requirements... 6 6 Test methods... 7 Appendix A (Normative) Preparation method of test water... 10 Appendix B (Normative) Test device for purified water production rate... 11

Foreword

This document is drafted in accordance with GB/T 1.1-2020 "Directives for standardization - Part 1.Rules for the structure and drafting of standardizing documents". This document replaces GB 34914-2017 "Minimum allowable value of water efficiency and water efficiency grades for reverse osmosis drinking water treatment purifiers". Compared with GB 34914-2017, in addition to structural adjustments and editorial changes, the main technical changes are as follows. a) Change the reverse osmosis water purifier in the scope of application to reverse osmosis water purifier and nanofiltration water purifier (see Clause 1; Clause 1 of the 2017 edition); b) Add the terms and definitions of water purifier, reverse osmosis water purifier, and nanofiltration water purifier (see 3.1, 3.2, 3.3); c) Change the index of water efficiency grades (see Clause 4; 4.4 of the 2017 edition); d) Add the requirements for the removal rate index of nanofiltration water purifier (see 5.3); e) Change the water quality index of test water (see 6.1; 5.1 of the 2017 edition); f) Change the test process and calculation method (see 6.3; 5.3 of the 2017 edition); g) Change the preparation method of test water (see Appendix A; Appendix A of the 2017 edition); h) Add the test device for purified water production rate (see Appendix B). Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. The issuing authority of this document shall not be held responsible for identifying any or all such patent rights. This document was proposed by and shall be under the jurisdiction of Standardization Administration of the PRC. This document was first issued in 2017.This is the first revision. Minimum allowable value of water efficiency and water efficiency grades for water purifier

1 Scope

This document specifies the minimum allowable value of water efficiency and water efficiency grades, technical requirements, and test methods for water purifier. This document applies to small water purifiers which use municipal tap water or other centralized water supply as raw water, and use reverse osmosis membrane or nanofiltration membrane as the main purification element for use in households or similar places. This document does not apply to large water purifiers with a length or width or height ≥2000 mm, mass ≥100 kg, and purified water flow rate ≥3 L/min.

2 Normative references

The contents of the following documents, through normative references in this text, constitute indispensable provisions of this document. Among them, for dated references, only the edition corresponding to that date applies to this document. For undated references, the latest edition (including all amendments) applies to this document. GB 5749 Standards for drinking water quality GB/T 5750 (all parts) Standard examination methods for drinking water GB 8538 Methods for examination of drinking natural mineral water GB/T 19249 Reverse osmosis water treatment equipment GB/T 30307 Household and similar drinking water treatment equipment

3 Terms and definitions

The terms and definitions defined in GB 5749, GB/T 19249 and GB/T 30307 and the following ones apply to this document. 3.1 Water purifier A system which consists of one or several drinking water treatment filter elements to improve water quality. 3.2 Reverse osmosis water purifier The water purifier used in households or similar places, which uses municipal tap water or other centralized water supply as raw water and uses reverse osmosis membrane filter element as the core treatment element to improve water quality. 3.3 Nanofiltration water purifier The water purifier used in households or similar places, which uses municipal tap water or other centralized water supply as raw water and uses nanofiltration membrane filter element as the core treatment element to improve water quality. 3.4 Purified water flow rate The water production per unit time under specified test conditions. Note. The unit is liters per minute (L/min). 3.5 Purified water production rate The ratio OF the total purified water volume of water purifier TO the total water inflow after the raw water has been purified under the specified test conditions.

4 Water efficiency grades for water purifier

The water efficiency grades for water purifier are divided into 3 grades; of which grade 1 has the highest water efficiency. The purified water production rate and nominal rated total purified water volume of each grade of water purifier shall comply with the provisions of Table 1.

5 Technical requirements

5.1 Total purified water volume The total purified water volume of water purifier shall not be less than the nominal rated total purified water volume. 5.2 Purified water flow rate The purified water flow rate of water purifier shall not be less than the nominal value. 5.3 Removal rate 5.3.1 The reverse osmosis water purifier uses the following control indexes to test the removal rate. 5.3.2 The nanofiltration water purifier uses the following control indexes to test the removal rate.

6 Test methods

6.1 Test water 6.1.1 When measuring the total purified water volume, purified water flow rate, removal rate, and purified water production rate of water purifier, the test water shall be prepared with pure water (conductivity < 10 μS/cm). The requirements for the water quality indexes are as follows. 6.1.2 The test water is prepared according to the method in Appendix A. The specific test method is carried out according to GB/T 5750 (all parts) and GB 8538. 6.2 Test conditions When measuring the total purified water volume, purified water flow rate, removal rate, and purified water production rate of water purifier, the test conditions shall meet the following requirements. 6.3 Test and calculation 6.3.1 Test When measuring the total purified water volume, purified water flow rate, removal rate, and purified water production rate of water purifier, the following steps shall be followed. 6.3.2 Calculation 6.3.2.1 Collect purified water for (300±2)s at the sampling point of the outflow sample; measure its water volume; collect it every 5 min and collect 3 times in total. Take the arithmetic mean of the 3 test values as the test result of purified water flow rate.

Appendix A

(Normative) Preparation method of test water A.1 All chemical reagents used are of analytical grade or equivalent purity. A.2 According to the following steps, use pure water (conductivity < 10 μS/cm) for standard-addition preparation (take the preparation of 100 L of test water as an example).

Appendix B

(Normative) Test device for purified water production rate The schematic diagram of the test device for purified water production rate of water purifier is shown in Figure B.1. ......

Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Image 1     Image 2     Image 3     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of English version of GB 34914-2021 be delivered?Answer: The full copy PDF of English version of GB 34914-2021 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.

Question 2: Can I share the purchased PDF of GB 34914-2021_English with my colleagues?Answer: Yes. The purchased PDF of GB 34914-2021_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB 34914-2021 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.

Question 5: Should I purchase the latest version GB 34914-2021?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB 34914-2021 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.

How to buy and download a true PDF of English version of GB 34914-2021?

A step-by-step guide to download PDF of GB 34914-2021_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB 34914-2021".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3    Steps 4~6    Step 7    Step 8    Step 9