GB/T 33523.72-2022 English PDFUS$474.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 33523.72-2022: Geometrical product specifications (GPS) - Surface texture: Areal - Part 72: XML file format x3p Status: Valid
Basic dataStandard ID: GB/T 33523.72-2022 (GB/T33523.72-2022)Description (Translated English): Geometrical product specifications (GPS) - Surface texture: Areal - Part 72: XML file format x3p Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: J04 Classification of International Standard: 17.040.20 Word Count Estimation: 26,212 Date of Issue: 2022-12-30 Date of Implementation: 2023-04-01 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 33523.72-2022: Geometrical product specifications (GPS) - Surface texture: Areal - Part 72: XML file format x3p---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. ICS 17.040.20 CCSJ04 National Standards of People's Republic of China Product Geometry Specification (GPS) Surface Structure Region Method Part 72.XML file format x3p Part 72.XMLfileformatx3p (ISO 25178-72.2017, IDT) Posted on 2022-12-30 2023-04-01 Implementation State Administration for Market Regulation Released by the National Standardization Management Committee table of contentsPreface I Introduction II 1 Scope 1 2 Normative references 1 3 Terms and Definitions 1 4 Requirements 3 5x3p file format 3 Appendix A (informative) XML file format 13 Appendix B (informative) main.xml example 19 Appendix C (Informative) Relationship with GPS Matrix Model 22 Reference 23forewordThis document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1.Structure and Drafting Rules for Standardization Documents" drafting. This document is part 72 of GB/T 33523 "Geometric Specification for Products (GPS) Surface Structure Area Law". GB/T 33523 The following parts have been published. --- Part 1.Representation of surface structure; --- Part 2.Terms, definitions and surface structure parameters; --- Part 3.Specification operation set; --- Part 6.Classification of surface structure measurement methods; --- Part 70.Physical measurement standards; --- Part 71.Software measurement standards; --- Part 72.XML file format x3p; --- Part 601.Nominal characteristics of contact (stylus) instruments; --- Part 602.Nominal characteristics of non-contact (confocal chromatic aberration probe) instruments; --- Part 603.Nominal characteristics of non-contact (phase-shift interference microscopy) instruments; --- Part 604.Nominal characteristics of non-contact (coherent scanning interference) instruments; --- Part 605.Nominal characteristics of non-contact (point autofocus probe) instruments; --- Part 606.Nominal characteristics of non-contact (zoom) instruments; --- Part 701.Calibration and measurement standards for contact (stylus) instruments. This document is equivalent to Part 72 of ISO 25178-72.2017 "Geometric Product Specification (GPS) Surface Structure Area Method. XML file format x3p". The following minimal editorial changes have been made to this document. ---Incorporated the amendments of ISO 25178-72.2017/AMD.1.2020, the outer margins of the terms involved are used Vertical double lines (‖) are marked. Please note that some contents of this document may refer to patents. The issuing agency of this document assumes no responsibility for identifying patents. This document is proposed and managed by the National Product Geometric Technical Specification Standardization Technical Committee (SAC/TC240). This document is drafted by. Tianjin University, China Institute of Metrology, Tsinghua University, Huazhong University of Science and Technology, Xiamen David Technology Co., Ltd. Division, China Machine Productivity Promotion Center Co., Ltd., China Machine Research Standard Technology Research Institute (Beijing) Co., Ltd., Guangdong Jinya Technology Co., Ltd., Shaanxi Seatney Electronics Co., Ltd., Guangdong Yingde Digital Technology Co., Ltd., Xi'an Ningkant Data Service Co., Ltd. The main drafters of this document. Guo Tong, Shi Yushu, Wei Haoyun, Liu Xiaojun, Ming Cuixin, Xie Ping, Zhu Yue, Zhang Dejun, Quan Yongde, Zhang Zhijin, Pi Kunlin.IntroductionWith the implementation of the national product quality improvement plan, the unified norms or principles used in the process of product design, manufacturing, measurement and inspection needs are becoming more and more urgent. The surface structure representation method and related standards in the original product geometric technical specifications can no longer meet the requirements of the product manufacturing process. Surface quality control requirements in the process. GB/T 33523 "Product Geometric Specifications (GPS) Surface Structure Area Method" is based on the new generation of GPS product geometric specifications Through digital measurement technology, software analysis technology and measurement evaluation, a new set of three-dimensional surface structure measurement and analysis recommended national standards. GB/T 33523, on the basis of proposing the surface structure representation, surface structure parameters and standard operation set, analyzes The method of surface structure measurement is given, the measurement technique used and the nominal characteristics of the instrument are given. In particular, GB/T 33523 covers contact At the same time, it focuses on introducing a variety of non-contact measuring instruments that are of great value in high-precision measurement applications but lack standard support. Measuring instrument. GB/T 33523 also regulates physical measurement and software measurement standards, and provides software file standards and surface structure measurement standards. quantitative characteristics. GB/T 33523 realizes the leap from two-dimensional profile measurement to three-dimensional surface structure measurement, and is the standard system for GPS product geometry Provides metrology test support. GB/T 33523 is proposed to consist of 14 parts. --- Part 1.Representation of surface structure. Specifies the use of diagrams in product technical documents (such as drawings, specifications, contracts and reports) Shaped symbols represent the rules of the surface structure of the region. --- Part 2.Terms, definitions and surface structure parameters. Specifies the terms, definitions and parameters for the evaluation of surface structure by the area method. --- Part 3.Specification operation set. It specifies the complete standard operation applicable to the evaluation of surface structure (scale-limited surface) by the area method. set. --- Part 6.Classification of surface structure measurement methods. Specifies the classification system mainly used for surface structure measurement methods, defines Three types of methods describe the relationship between the three types of methods and give a brief description of the specific methods. --- Part 70.physical measurement standards. Specifies physical measurements for periodic verification and adjustment of area-based surface structure measuring instruments standard features. --- Part 71.Software measurement standards. Specifies the S1 and S2 software measurement standards for software calibration of measuring instruments (standard Definition of terms). --- Part 72.XML file format x3p. Specifies an XML file format for storing and exchanging topography and contour data Formula x3p. --- Part 601.Nominal characteristics of contact (stylus) instruments. Specifies the standard for surface structure area method contact (stylus) instruments called characteristics. --- Part 602.Nominal characteristics of non-contact (confocal chromatic aberration probe) instruments. It stipulates the use of white light based on the axial dispersion characteristic Design and metrological characterization of a non-contact instrument for the measurement of surface structure with a revolutionary confocal chromatic aberration probe. --- Part 603.Nominal characteristics of non-contact (phase-shift interference microscopy) instruments. Phase shift interferometry (PSI) profile and area specified Metrological properties of surface structure measurement microscopes. --- Part 604.Nominal characteristics of non-contact (coherent scanning interference) type instruments. Specifies the phase for 3D mapping of surface heights Metrology characterization of dry scanning interferometry (CSI) measurement systems. --- Part 605.Nominal characteristics of non-contact (point AF probe) instruments. specifies the use of point autofocus probe measurements Metrological properties of surface structures for non-contact instruments. --- Part 606.Nominal characteristics of non-contact (zoom) instruments. Specifies the use of variable focus (FV) sensors to measure surface structure Design and metrological characteristics of non-contact instruments. --- Part 701.Calibration and measurement standards for contact (stylus) instruments. Specifies the area method surface structure contact (stylus) type instrument The characteristics of physical measuring tools used as measurement standards, the evaluation methods of residual errors, and the detection methods of calibration, acceptance and periodic verification. Product Geometry Specification (GPS) Surface Structure Region Method Part 72.XML file format x3p1 ScopeThis document specifies the XML file format x3p for storing and exchanging topography and contour data.2 Normative referencesThe contents of the following documents constitute the essential provisions of this document through normative references in the text. Among them, dated references For documents, only the version corresponding to the date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to this document. ISO 25178-600 Geometric product specification (GPS) Surface structure area method Part 600.Area topography measurement method3 Terms and DefinitionsThe terms and definitions defined in ISO 25178-600 and the following apply to this document. 3.1 zip data package zip-container A file format that can be used as a package of multiple files and folders, and also supports compression of stored content. Note. See reference [3] for the description of the file format. 3.2 Information Digest Algorithm md5 A method of computing a unique 16-byte binary checksum, used to check the integrity of a file. Note 1.Binary values are usually represented as 32 hexadecimal digits. Note 2.See reference [1]. 3.3 16-bit signed integer int16 Use 2 bytes to represent a signed integer. Note 1.The minimum value of the int16 type is -32768, and the maximum value is 32767. Note 2.In the memory, the low byte is stored in the low address unit, and the high byte is stored in the high address unit. 3.4 32-bit signed integer int32 Signed integers are represented by 4 bytes. Note 1.The minimum value of the int32 type is -2147483648, and the maximum value is 2147483647. Note 2.In the memory, the low byte is stored in the low address unit, and the high byte is stored in the high address unit. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 33523.72-2022_English be delivered?Answer: Upon your order, we will start to translate GB/T 33523.72-2022_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 33523.72-2022_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 33523.72-2022_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
