GB/T 3300-2008 English PDF

US$139.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 3300-2008: Standard test method for deformation measurement of domestic ceramic ware
Status: Valid

GB/T 3300: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 3300-2008	139	Add to Cart	3 days	Standard test method for deformation measurement of domestic ceramic ware	Valid
GB/T 3300-1991	199	Add to Cart	2 days	Standard test method for deformation measurement of domestic ceramic ware	Obsolete

Similar standards

GB/T 3301   GB/T 4736   GB/T 10811   GB/T 3298   GB/T 3296   

Basic data

Standard ID: GB/T 3300-2008 (GB/T3300-2008)
Description (Translated English): Standard test method for deformation measurement of domestic ceramic ware
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: Y24
Classification of International Standard: 81.060.20
Word Count Estimation: 6,642
Date of Issue: 2008-08-28
Date of Implementation: 2008-12-01
Older Standard (superseded by this standard): GB/T 3300-1991
Regulation (derived from): National Standard Approval Announcement 2008 No.14 (Total No.127)
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies test methods ceramic ware deformation. This standard applies to pottery, stoneware, porcelain, excluding special-shaped products.

GB/T 3300-2008: Standard test method for deformation measurement of domestic ceramic ware

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Standard test method for deformation measurement of domestic ceramic ware ICS 81.060.20 Y24 National Standards of People's Republic of China Replacing GB/T 3300-1991 Ceramic ware deformation test methods Posted 2008-08-28 2008-12-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

This standard replaces GB/T 3300-1991 "ceramic ware deformation test methods." This standard compared with GB/T 3300-1991, the main changes are as follows. --- Amend Chapter 1, "scope"; --- Increased Chapter 2, "Terms and Definitions", Chapter 3, "Principle," and Chapter 6, "Inspection Report"; --- Original standard 2.2.2 "foot wedge high precision, accurate measurement, inspection and arbitration provisions of the ceramic measuring deformation can also be used to Seeking more stringent classification of ceramic deformation inspection "and 2.2.3" foot ladder because precision is not high, only for the strict requirements of the rapid test. " Modify this standard "wedge 4.3 feet flat products as deformation arbitration test measuring tool"; --- Original standard 2.3.2a. The "gently rub into the space of the highest point without a sense of resistance" to modify this standard 4.2.2a) "The highest point gently into the void and there is a sense of resistance." The standard proposed by China National Light Industry Council. This standard by the National Standardization Center ceramics. This standard is drafted by. National Ceramic Products Quality Supervision and Inspection Center (Jiangxi). Participated in the drafting of this standard. Guangxi Sanhuan Enterprise Group Co., People's Republic of China Entry-Exit Inspection and Jingdezhen Quarantine Bureau. The main drafters of this standard. Cheng Guoan, Tong Yuying, easy edge, Yuan Wen-chan, Huta. This standard replaces the standards previously issued as follows. --- GB/T 3300-1982, GB/T 3300-1991. Ceramic ware deformation test methods

1 Scope

This standard specifies the test method for deformation ceramic ware. This standard applies to pottery, stoneware, porcelain, excluding special-shaped products.

2 Terms and definitions

The following terms and definitions apply to this standard. 2.1 Rim height difference between the maximum and minimum height. 2.2 The maximum difference between the diameter and the minimum diameter of the outer diameter. 2.3 From the article inside rim level to the lowest depth of 25mm or less flat ceramics. 2.4 Products from rim to the horizontal plane is greater than the minimum internal depth of 25mm ceramic products. Principle 3 With a rim height difference characterize the deformation of flat products; poor characterization of deformation outer diameter of the hollow article.

4 Determination of deformed flat products

4.1 Measuring Tools 4.1.1 Glass plates Use 10 test precision flatness ruler glass plate, a glass plate and requires no significant gap between the ruler. Glass panel size Should be greater than the size of the test article. 4.1.2 Wedge foot Wedge feet long 220mm, width 6mm, an upper edge width of 0.2mm ~ 0.5mm (see Figure 1). Bottom surface height error ≤0.05mm. bottom Surface flatness ≤0.05mm, the requirements of surface roughness of engraved lines and clear scale. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 3300-2008_English be delivered?

Answer: Upon your order, we will start to translate GB/T 3300-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 3300-2008_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 3300-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 3300-2008?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 3300-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.