GB/T 32370-2015 English PDF

US$129.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 32370-2015: Determination of the length and width for adhesive tapes
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 32370-2015	129	Add to Cart	3 days	Determination of the length and width for adhesive tapes	Valid

Similar standards

GB/T 41657   GB 30982   GB/T 31125   GB/T 32369   GB/T 32368   

Basic data

Standard ID: GB/T 32370-2015 (GB/T32370-2015)
Description (Translated English): Determination of the length and width for adhesive tapes
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: G38
Classification of International Standard: 83.180
Word Count Estimation: 6,627
Date of Issue: 2015-12-31
Date of Implementation: 2016-07-01
Regulation (derived from): State Standard Announcement 2015 No.43
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China

GB/T 32370-2015: Determination of the length and width for adhesive tapes

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Determination of the length and width for adhesive tapes ICS 83.180 G38 National Standards of People's Republic of China Determination of length and width of the adhesive tape Issued on. 2015-12-31 2016-07-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

This standard was drafted in accordance with GB/T 1.1-2009 given rules. The standard proposed by China Petroleum and Chemical Industry Association. This standard by the National Standardization Technical Committee adhesive (SAC/TC185) centralized. This standard was drafted. Shanghai Institute of Rubber Products, Wing Tai (Zhongshan) Co., Ltd., Shanghai Regent Adhesive Development Co., Ltd., Sea deer of Investment (Group) Co., Ltd. Zhejiang Yonghe Adhesive. The main drafters. Zhang Jianqing, milky Jian, Tang Minfeng, Chenhua Chang, Li Chunlei, Song magnetic people. Determination of length and width of the adhesive tape

1 Scope

This standard specifies the test method for adhesive tape length and width. This standard applies to the determination of the length and the width of the tape.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 9056 metal ruler GB/T 21389-2008 cursor, with table and several Caliper GB/T 22396 the term pressure-sensitive Adhesive QB/T 2443 Steel Tape

3 Terms and Definitions

Terms and definitions GB/T 22396 apply to this document defined.

4 General requirements for tests

4.1 Sample preparation and pretreatment of samples Sample at a temperature of (23 ± 1) ℃, relative humidity of (50 ± 5)% of the standard environment for at least 24h. When the sample is in the shape of rolling Tense, placing increased more than 2h. Unless otherwise specified, gently unwound in order to prevent the occurrence of deformation of the specimen. According to the requirements of the test, and cut the required size and number of samples from Samples. Specimens should be handled carefully to minimize direct contacts with adhesive. 4.2 The results of numerical trade-offs Test results are reported in Table 1 provisions. Table 1 choice test result values The median number of pilot projects report After a digit length/m decimal point Width/mm Width ≤150 digit after the decimal point Width > 150 integer ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 32370-2015_English be delivered?

Answer: Upon your order, we will start to translate GB/T 32370-2015_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 32370-2015_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 32370-2015_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.