GB/T 31359-2015 English PDF

US$679.00 · In stock
Delivery: <= 6 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 31359-2015: Test methods of semiconductor lasers
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 31359-2015	679	Add to Cart	6 days	Test methods of semiconductor lasers	Valid

Similar standards

GB/T 7247.1   GB/T 39118   GB/T 18490.1   GB/T 18462   GB/T 31358   

Basic data

Standard ID: GB/T 31359-2015 (GB/T31359-2015)
Description (Translated English): Test methods of semiconductor lasers
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: L51
Classification of International Standard: 31.260
Word Count Estimation: 32,353
Date of Issue: 2015-02-04
Date of Implementation: 2015-08-01
Quoted Standard: GB 7247.1; GB/T 10320; GB/T 15313; GB/T 31358-2015
Regulation (derived from): National Standards Bulletin 2015 No. 3
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This Standard specifies the test method for a semiconductor laser main photoelectric parameters. This Standard applies to testing the main optical parameters of semiconductor lasers. The semiconductor laser module can refer executed.

GB/T 31359-2015: Test methods of semiconductor lasers

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Test methods of semiconductor lasers ICS 31.260 L51 National Standards of People's Republic of China A semiconductor laser test methods Issued on. 2015-02-04 2015-08-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Table of Contents

Introduction Ⅲ 1 Scope 1 2 Normative references 1 3 Terms, definitions and symbols 1 3.1 Terms and definitions 3.2 Symbols and units 1 4 Test conditions and requirements 2 4.1 Environmental Requirements 2 4.2 Test equipment and measurement requirements 2 4.3 Laser Safety Requirements 4.4 tested products to work in claim 3 4.5 Other Requirements 3 5 Test Method 3 5.1 output optical power test 3 5.2 average power test 4 5.3 Peak Power Test 4 5.4 Test pulse energy 6 5.5 output power instability Test 7 5.6 output energy instability test 8 5.7 Operating Current 9 5.8 Operating voltage 10 5.9 threshold current 11 5.10 slope efficiency of 12 Electro-optical conversion efficiency 13 5.11 5.12 Wavelength - Temperature drift 14 5.13 peak wavelength of 15 Spectral width 16 5.14 Center wavelength 16 5.15 5.16 degree of polarization 17 Repetition rate 18 5.17 5.18 pulse width 19 5.19 light intensity distribution 19 5.20 beam width 23 5.21 fast axis divergence and the slow axis divergence 23 Side mode suppression ratio 25 5.22 5.23 cut-off frequency of 26 Examples Appendix A (informative) light intensity distribution 28

Foreword

This standard was drafted in accordance with GB/T 1.1-2009 given rules. The standard proposed by China Machinery Industry Federation. This standard by the National Optical radiation safety and laser equipment Standardization Technical Committee (SAC/TC284) centralized. This standard was drafted. Xi'an Focuslight Ltd., Xi'an Institute of Optics and Fine Mechanics, Chinese Academy of semiconductor Body Institute, Beijing Branch of the Laser Technology Co., Ltd., Wuhan laborers Technology Co., Ltd. is the source of photons, China Electronics Technology Group Corporation 13th Research Institute. The main drafters of this standard. Liu Xingsheng, Zhao Wei, Xu Guodong, Zhang Yanchun, red Yang Jun, Ma Xiaoyu, Tang Qi, Wu Di, Wang Chen-fu, Wang guards, Xieyan Hu, Wang Chan, Xiaoning, Shi Jun-Hong, Chen Hairong, Li Zhong, Shi Zhaohui, En, Xu Haiming, Zhang new. A semiconductor laser test methods

1 Scope

This standard specifies the test method for a semiconductor laser main photoelectric parameters. This standard applies to testing the semiconductor laser main photoelectric parameters. The semiconductor laser component can refer executed.

2 Normative references

The following documents for the application of this document is essential, dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB 7247.1 Safety of laser products - Part 1. Equipment classification, requirements Electrical safety GB/T 10320 laser equipment and facilities GB/T 15313 Laser term GB/T 31358-2015 General specification for semiconductor lasers 3 Terms, definitions and symbols 3.1 Terms and Definitions GB/T 15313, the terms and definitions GB/T 31358-2015 defined apply to this document. 3.2 Symbols and units The symbols and units listed in Table 1 are applicable to this document. Table 1 Symbols and units Term Symbol Unit Optical output power Pop mW, W Average power Pavg mW, W Pulse energy EJ, mJ Peak power Pp mW, W Output power instability SPt - Output energy instability SEt - Peak wavelength λp nm ΔλFWHM nm spectral width Center wavelength λc nm Operating current Iop mA, A Operating voltage Vop mV, V ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 31359-2015_English be delivered?

Answer: Upon your order, we will start to translate GB/T 31359-2015_English as soon as possible, and keep you informed of the progress. The lead time is typically 4 ~ 6 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 31359-2015_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 31359-2015_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.