GB/T 30405-2013 English PDF

US$879.00 · In stock
Delivery: <= 6 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 30405-2013: Tannery machines -- Reciprocating roller machines -- Safety requirements
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 30405-2013	879	Add to Cart	6 days	Tannery machines -- Reciprocating roller machines -- Safety requirements	Valid

Similar standards

GB 19865   GB/T 30410   GB/T 30404   

Basic data

Standard ID: GB/T 30405-2013 (GB/T30405-2013)
Description (Translated English): Tannery machines -- Reciprocating roller machines -- Safety requirements
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: Y94
Classification of International Standard: 59.140.40
Word Count Estimation: 40,497
Quoted Standard: GB/T 3766-2001; GB 4208-2008; GB 5226.1-2008; GB/T 7932-2003; GB/T 8196-2003; GB 12265.3-1997; GB/T 15706-2012; GB 16754-2008; GB/T 16855.1-2008; GB/T 17454.2-2008; GB/T 18153-2000; GB 18209.1-2010; GB/T 18831-2010; GB/T 19436.1-2013; GB/T 19436.2-2013; G
Adopted Standard: EN 972-1998 + A1-2010, NEQ
Regulation (derived from): National Standards Bulletin 2013 No. 27
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the leather and fur roll when reciprocating machinery use by the intended use and the use by the manufacturer under the conditions of foreseeable misuse, all of the major hazards associated machinery, hazardous or dangerous event s

GB/T 30405-2013: Tannery machines -- Reciprocating roller machines -- Safety requirements

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Tannery machines. Reciprocating roller machines. Safety requirements ICS 59.140.40 Y94 National Standards of People's Republic of China Leather Machinery Roller reciprocates Mechanical safety requirements Issued on. 2013-12-31 2014-12-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Table of Contents

Preface Ⅰ Introduction Ⅱ 1 Scope 1 2 Normative references 2 3 Definitions and Terminology 2 4 Safety requirements and/or protective measures 3 4.1 General 3 4.2 roller reciprocates machinery General Requirements 3 4.3 All hazardous area safety requirements 4 Security requirements 4.4 workspace 5 Security 4.5 into the zone of Claim 7 Verify safety requirements 8 5 6 Use the information 8 6.1 General 8 6.2 signal and warning device 8 6.3 User's Guide 8 6.4 mark 10 Typical Structure Appendix A (informative) machine 11 Typical described in Appendix B (informative) machine is defined in the legend of the machine 18 Annex C (normative) to prevent the risk of noise (machines listed in Chapter 1) 22 Annex D (informative) a list of 23 major hazard Appendix E (normative) noxious liquid, gas, mist, smoke and dust cleared 33 Annex F (normative) Fire 34 References 35

Foreword

This standard was drafted in accordance with GB/T 1.1-2009 given rules. The standard reference method using a redrafting of the European standard EN972.1998 A1.2010 "Mechanical leather roller reciprocates machine Mechanical safety requirements, "the preparation, and EN972.1998 A1.2010 non-equivalent degree of consistency. The standard structure and EN972.1998 A1.2010 is different, but its safety requirements, protective measures, etc. and EN972.1998 A1.2010 exactly. The standard proposed by China National Light Industry Council. This standard by the National Light Industry Machinery Standardization Technical Committee leather machinery Technical Committee (SAC/TC101/SC1) centralized. This standard was drafted. Yantai Yi Long Machinery Co., Ltd. Xinji Julong Leather Machinery Co., Ltd., Jiaxing University, Yangzhou Yang Bao machinery have Limited, China Leather and Footwear Industry Research Institute, Jiangsu Port Allen Leather Machinery Co., Ltd. Dongguan City Hang Bo Electrical Technology Co., Societe Generale Leather Technology Co., Ltd., Hebei Dongming Industrial Group Co., Ltd., Zhejiang Zhonghui Fur & Leather Co., Ltd., Shenzhen City's Tu Jing Yue Technology has Limited. The main drafters of this standard. Xu Jianping, Zhang Dongxu, Guo Liying, Peng Wenli, pipe dragon, Li Gang, Kong Peili and Wang Xiang, He Zhaohui, Heshao Ming, Liu, Ma Jian standard, painted into the red.

Introduction

In accordance with the provisions of GB/T 15706-2012, the present standard belongs to the C standard. Machinery covered by this standard and the risk of a dangerous state or hazardous events covering a range given in the scope of this standard. When this C class standards with Class A or Class B standard standard shall not at the same time, according to the C class standard requirements for design and manufacture Machines give priority to this type C standard requirements. Leather Machinery Roller reciprocates Mechanical safety requirements

1 Scope

This standard specifies the leather and fur machinery roller reciprocates by its intended purpose as well as the manufacturer foreseeable misuse under conditions With, all the machine-related significant risk, hazard or danger status event. This standard also provides leather and fur roller reciprocates mechanical terms and definitions, as well as in GB/T 15706-2012 of 5.4 Out of the machine life cycle requirements for each stage safety and/or protective measures, safety requirements validation and use of information. This standard applies to the following feed roller having opening and closing reciprocating used in the processing of animal hides and skins during or feed Roll reciprocation mechanical device (a typical structure is shown in Figure A Figure A.1 ~ Appendix A.13, typically described in Appendix B). 1) buffing machines [see A.1a) and A.1b)]; 2) polishing machine [see A.1a) and A.1b)]; 3) ironing machines (sheepskin and fur) [see A.2a) and A.2b)]; 4) carding machines [(see Figure A.3a) and A.3b)]; 5) shearing machine (sheepskin and fur) [see A.4a) and A.4b)]; 6) Universal roller staking machines [see A.5a) and A.5b)]; 7) spreading machine [see A.6a) and A.6b)]; 8) off the Bar [see A.6a) and A.6b)]; 9) Net surface plane [see Fig A.6a) and A.6b)]; 10) Hair Removal Machine [see A.6a) and A.6b)]; 11) Wringer [see A.6a) and A.6b)]; 12) Roller Screed [see A.7a) and A.7b)]; 13) roll staking machine [see A.8a) and A.8b)]; 14) fleshing machine [see A.9a) and A.9b)]; 15) pelt fleshing machine [see A.10a) and A.10b)]; 16) Wet grinding machine leather [see A.11a) and A.11b)]; 17) Shaving Machine (discharge formula) [see A.12a) and A.12b)]; 18) shaving machines (feed type) [see A.13a) and A.13b)]. Note. Unless otherwise indicated, the standard reference to "feed rollers" also includes "feeding device." Taking into account the intended use of the machine, foreseeable misuse, component and system failures, this standard does not apply to the production standards promulgated before machine. This standard provides the design stage to reduce noise terms (see 4.3.4 and Appendix C), the machine in question does not provide the noise level testing regulations Away. Without this procedure, the manufacturer can not meet their obligations to provide the market a machine noise emission values. The Standard Appendix D lists all significant risk. Dust, smoke and steam discharge in Appendix E. Fire in Appendix F. This standard gives general measures to reduce the risk of normative appendix. The manufacturer shall design and direct method can be used to verify Successful in reducing these risks. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 30405-2013_English be delivered?

Answer: Upon your order, we will start to translate GB/T 30405-2013_English as soon as possible, and keep you informed of the progress. The lead time is typically 4 ~ 6 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 30405-2013_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 30405-2013_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.