GB/T 2820.9-2024 PDF English
GB/T 2820.9: Historical versions
| Standard ID | USD | BUY PDF | Delivery | Standard Title (Description) | Status |
| GB/T 2820.9-2024 | 290 | Add to Cart | Auto, 9 seconds. | Reciprocating internal combustion engine driven alternating current generating sets - Part 9: Measurement and evaluation of mechanical vibrations | Valid |
| GB/T 2820.9-2002 | 559 | Add to Cart | 3 days | Reciprocating internal combustion engine driven alternating current generating sets -- Part 9: Measurement and evaluation of mechanical vibrations | Obsolete |
Similar standards
GB/T 2820.9-2024: Reciprocating internal combustion engine driven alternating current generating sets - Part 9: Measurement and evaluation of mechanical vibrations
---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT2820.9-2024
GB NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 29.160.40 CCS K 52 GB/T 2820.9-2024 / ISO 8528-9:2017 Replacing GB/T 2820.9-2002 Reciprocating internal combustion engine driven alternating current generating sets - Part 9: Measurement and evaluation of mechanical vibrations (ISO 8528-9:2017, IDT) ISSUED ON: APRIL 25, 2024 IMPLEMENTED ON: NOVEMBER 01, 2024 Issued by: State Administration for Market Regulation; National Standardization Administration.
Table of Contents
Foreword ... 3 Introduction ... 5 1 Scope ... 7 2 Normative references ... 7 3 Terms and definitions ... 8 4 Symbols and abbreviations ... 8 5 Provisions and additional requirements ... 9 6 Measuring equipment ... 9 7 Measurement direction and measurement position ... 9 8 Working conditions during measurement ... 11 9 Evaluation of measurement results ... 11 10 Measurement report ... 11 Appendix A (Informative) Typical structure of generator set ... 12 Appendix B (Informative) Explanation on vibration evaluation of generator sets ... 14 Appendix C (Informative) Vibration values ... 15 Appendix D (Informative) Measurement report ... 16 References ... 18Foreword
This document was drafted in accordance with the provisions of GB/T 1.1-2020 "Directives for standardization - Part 1: Rules for the structure and drafting of standardizing documents". This document is Part 9 of GB/T 2820 "Reciprocating internal combustion engine driven alternating current generating sets". GB/T 2820 has published the following parts: - Part 1: Application, ratings and performance; - Part 2: Engines; - Part 3: Alternating current generators for generating sets; - Part 4: Controlgear and switchgear; - Part 5: Generating sets; - Part 6: Test methods; - Part 7: Technical declarations for specification and design; - Part 8: Requirements and tests for low-power generating sets; - Part 9: Measurement and evaluation of mechanical vibrations; - Part 10: Measurement of airborne noise by the enveloping surface method; - Part 11: Rotary uninterruptible power systems - Performance requirements and test methods; - Part 12: Emergency power supply to safety services. This document replaces GB/T 2820.9-2002 "Reciprocating internal combustion engine driven alternating current generating sets - Part 9: Measurement and evaluation of mechanical vibrations". Compared with GB/T 2820.9-2002, in addition to structural adjustments and editorial changes, the main technical changes are as follows: - DELETE the symbols of acceleration and peak acceleration (see Chapter 4 of the 2002 edition); - DELETE the measured value (see Chapter 6 of the 2002 edition); - CHANGE the working state of the generator set during measurement (see Chapter 8; Chapter 9 of the 2002 edition). Reciprocating internal combustion engine driven alternating current generating sets - Part 9: Measurement and evaluation of mechanical vibrations1 Scope
This document describes the procedures for measuring and evaluating the specified external mechanical vibration characteristics of the generator set at specified measurement positions. This document is applicable to fixed and mobile AC generator sets driven by reciprocating internal combustion engines with rigid and/or elastic mounting. This document is applicable to land and marine use, not to generator sets used in aviation or generator sets used to drive land vehicles and locomotives. For some specific applications (such as power supply to hospitals, high-rise buildings, etc.), additional requirements are required. The provisions of this document are regarded as the basis for these applications. For generator sets driven by other reciprocating prime movers (such as biogas engines, steam engines, etc.), the provisions of this document are regarded as the basis for these applications.2 Normative references
The contents of the following documents constitute the essential clauses of this document through normative references in the text. Among them, for dated references, only the version corresponding to the date applies to this document; for undated references, the latest version (including all amendments) applies to this document. ISO 2041 Mechanical vibration, shock and condition monitoring - Vocabulary Note: GB/T 2298-2010 Mechanical vibration, shock and condition monitoring vocabulary (ISO 2041:2009, IDT). ISO 8528-5:2022 Reciprocating internal combustion engine driven alternating current generating sets - Part 5: Generating sets Note 1: There is no technical difference between the referenced content of ISO 8528- 5:2022 and the referenced content of ISO 8528-5:2013. ......Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
