GB/T 28177.1-2011 English PDFUS$859.00 · In stock
Delivery: <= 6 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 28177.1-2011: Identification cards -- Thin flexible cards -- Part 1: Physical characteristics Status: Valid
Basic dataStandard ID: GB/T 28177.1-2011 (GB/T28177.1-2011)Description (Translated English): Identification cards -- Thin flexible cards -- Part 1: Physical characteristics Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: L64 Classification of International Standard: 35.240.15 Word Count Estimation: 39,397 Date of Issue: 2011-12-30 Date of Implementation: 2012-06-01 Quoted Standard: GB/T 460; ISO 1831; ISO 1924-2; ISO 2144; ISO 2471; ISO 2493; ISO 5626; ISO 5627; ISO 5629; ISO 5636-3; ISO 6383-2; ISO 8226-2; ISO 8570; ISO/IEC 10373-1; ISO/IEC 10373-6; ISO/IEC 15457-2; ISO/IEC 15457-3 Adopted Standard: ISOIEC 15457-1-2008, MOD Regulation (derived from): Announcement of Newly Approved National Standards No. 23 of 2011 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies in the life cycle of the two point on the physical characteristics of the flexible thin card: loaded into the card issuing equipment, when released to the public. This section considers two aspects of man and machine and clarifies the minimum requirements. This section identifies the original card size, and specifies the characteristics and dimensions. This section gives the card in different environmental conditions of storage and use guidelines. GB/T 28177.1-2011: Identification cards -- Thin flexible cards -- Part 1: Physical characteristics---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Identification cards Thin flexible cards Part 1. Physical characteristics ICS 35.240.15 L64 National Standards of People's Republic of China Identification cards - Thin flexible cards Part 1. Physical characteristics Part 1. Physicalcharacteristics (ISO /IEC 15457-1.2008, MOD) Issued on. 2011-12-30 2012-06-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released Table of ContentsPreface Ⅰ Introduction Ⅲ 1 Scope 1 2 Normative references 1 3 Terms and definitions, abbreviations 2 General characteristics 3 4 5 6 geometric profile 6 claim 8 7 positioning features 15 8 specific attributes of the non-contact TFC 17 Appendix A (normative) material properties of paper TFC 23 Appendix B (normative) material properties of composite materials TFC 27 Annex C (normative) plastic material properties TFC 30 Annex D (normative) Recommended position TFC.1 tactile identifiers 32 References 33ForewordGB/T 28177 "flexible thin card identification card" is divided into three parts. --- Part 1. Physical characteristics; --- Part 2. magnetic recording technology; --- Part 3. Test methods. This section GB/T Part of 128,177. This section drafted in accordance with GB/T 1.1-2009 given rules. This section uses redrafted law revision using ISO /IEC 15457-1.2008 "identification card thin flexible cards - Part 1. Physical characteristic". This part of ISO /IEC 15457-1. Compared to 2008, the increase in the structure of the introduction and abbreviations (see 3.2). This part of ISO /IEC 15457-1.2008 and its technical differences for the following reasons. --- According to the current domestic situation, the terms and Appendix A handwriting and sizing factor (sizingandpenwritingfac- tor) to sizing degree (sizingvalue), its control method to GB/T 460 "Determination of the degree of sizing of paper," a reference to the corresponding Parameter to be greater than or equal to 0.5mm. This section also made the following editorial changes. --- Increased introduction, which will be described in the scope of international standards on the use of flexible thin card and recording method used in the introduction; --- For ease of use, an increase of abbreviations; --- Because habits, changed the order of the terms; --- Developed according to standard principles, references added ISO 2493, ISO 5636-3, ISO 8226-2 three criteria, in reference Delete the file in the literature; --- For context correspondence, the position of the international standards 8.2.1 and 8.2.2 of the exchange, 8.4.2 and 8.4.3 of the position Exchange. Consistency correspondence between this part of international documents and normative references of our files are as follows. --- Determination of GB/T 12914-2008 Paper and cardboard tensile strength (ISO 1924-1.1992, ISO 1924-2.1994, MOD) --- GB/T 742-2008 papermaking raw material, pulp, paper and board - Determination of ash (ISO 2144.1997, MOD) --- GB/T 1543-2005 Paper and paperboard opacity (paper backing) measurement (diffuse reflectance method) (ISO 2471.1998, MOD) --- GB/T 22364-2008 Determination of paper and cardboard bending stiffness (ISO 2493.1992, ISO 5629. 1983, MOD) --- GB/T 457-2008 Determination of paper and cardboard folding endurance (ISO 5626.1993, MOD) --- GB/T 456-2002 Paper and cardboard smoothness (Buick method) (ISO 5627.1995, IDT) --- GB/T 458-2008 Determination of paper and paperboard air permeability (ISO 5636-2. 1984, ISO 5636-3.1992, ISO 5636-5. 2003, MOD) --- GB /Determination of plastic film and sheet tear resistance of T 16578.2-2009 Part 2. Elmendorf (Elmendor) method (ISO 6383-2. 1983, IDT) --- GB/T 22899.2-2008 Determination of wet paper and paperboard expansion Part 2. Maximum relative humidity to 86 percent of all Cheng wet expansion (ISO 8226-2.1990, MOD) --- GB/T 17554.1-2006 Identification cards - Test methods - Part 1. General characteristics (ISO /IEC 10373-1.1998, MOD) Please note that some of the content of this document may involve patents. Release mechanism of the present document does not assume responsibility for the identification of these patents. This part of the National Information Technology Standardization Technical Committee (SAC/TC28) and focal points. This section was drafted by. China Electronics Standardization Institute, Shenzhen is China Industry Co., Ltd., shares of Eastcom Peace Smart Card Ltd., Shenzhen effective Electronics Co., Ltd. The main drafters of this section. Qian Jin, Yan Jinbo, Huang Xiaopeng, public school Yan, Gao Lin, Feng Jing, Zhao Jihong, Xia Dina, Qiaoshen Jie.IntroductionThin flexible card (TFC) is typically used to access the goods or services of automatic control, such as public transportation, highway toll systems, parking, with Gift certificates and the like. In these applications, data can be written using different recording technology equipment and/or reading, for example, magnetic stripe, optical character recognition (OCR), bar code, non-contact technology. Identification cards - Thin flexible cards Part 1. Physical characteristics1 ScopeGB/T 28177 in this section specifies the physical characteristics of the two points in time during the life cycle of a flexible thin card. --- When loaded to the card issuing device; --- The time of release to the public. This section considers the factors of human and machine aspects and clarify the minimum requirements. This section identifies the original card size, and specifies the characteristics and dimensions. This section gives guidelines for use in storage and under different environmental conditions of the card. NOTE. ID-1 type card in GB/T 14916 in the provisions of this range does not match.2 Normative referencesThe following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 460 Determination of the degree of sizing of paper (GB/T 460-2008) ISO 1831 Printing specifications for optical character recognition (Printingspecificationsforopticalcharacterrecognition) ISO 1924-2 Paper and board Determination of tensile strength - Part 2. Constant rate of elongation method (20mm/min) (Paperand board-Determinationoftensileproperties-Part 2. Constantrateofelongation method (20mm / min)) ISO 2144 paper, board and pulp measured after 900 ℃ combustion residues (ash) of (Paper, boardandpulps-Deter- minationofresidue (ash) onignitionat900 ℃) ISO 2471 Paper and paperboard opacity (paper backing) diffuse reflectance measurement method (Paperandboard-Determinationof opacity (paperbacking) -Diffusereflectancemethod) ISO 2493 Paper and board Determination of bending stiffness (Paperandboard-Determinationofresistancetoben- ding) ISO 5626 Determination of folding paper (Paper-Determinationoffoldingendurance) ISO 5627 Paper and paperboard smoothness (Buick method) (Paperandboard-Determinationofsmoothness (Bekkmethod)) ISO 5629 Paper and board Determination of bending stiffness resonance method (Paperandboard-Determinationofbending stiffness-Resonancemethod) ISO 5636-3 Paper and board - Determination of air permeability (Paperandboard-Determinationofairpermeance (medium range) -Part 3. Bendtsenmethod) Part 2 ISO 6383-2 Determination of plastic film and sheet tear resistance. the Elmendorf (Elmendor) method (Plastics-Filmandsheeting-Determinationoftearresistance-Part 2. Elmendorfmethod) ISO 8226-2 Paper and board Determination of wet expansion Part 2. Maximum relative humidity 86% to wet expansion process (Paperandboard-Measurementofhygroexpansivity-Part 2. Hygroexpansivityuptoamaximum relativehumidityof86%) ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 28177.1-2011_English be delivered?Answer: Upon your order, we will start to translate GB/T 28177.1-2011_English as soon as possible, and keep you informed of the progress. The lead time is typically 4 ~ 6 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 28177.1-2011_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 28177.1-2011_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
