GB/T 25419-2023 English PDFUS$319.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 25419-2023: Fruit tree pruning machine Status: Valid GB/T 25419: Historical versions
Basic dataStandard ID: GB/T 25419-2023 (GB/T25419-2023)Description (Translated English): Fruit tree pruning machine Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: B91 Classification of International Standard: 65.060.99 Word Count Estimation: 15,199 Date of Issue: 2023-05-23 Date of Implementation: 2023-12-01 Older Standard (superseded by this standard): GB/T 25419-2010 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 25419-2023: Fruit tree pruning machine---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.ICS 65:060:99 CCSB91 National Standards of People's Republic of China Replacing GB/T 25419-2010 fruit tree pruning machine Released on 2023-05-23 2023-12-01 Implementation State Administration for Market Regulation Released by the National Standardization Management Committee table of contentsPreface I 1 Scope 1 2 Normative references 1 3 Terms and Definitions 2 4 Classification, Modeling and Basic Parameters 3 4:1 Classification 3 4:2 Model compilation 4 4:3 Basic parameters 4 5 Technical Requirements 4 5:1 General requirements 4 5:2 Machine 5 5:3 Reliability 5 5:4 Main components of electric pruning machine 5 5:5 Security 6 6 Test method 7 6:1 Machine 7 6:2 Reliability 7 6:3 Main components 8 6:4 Security 9 7 Inspection rules 9 7:1 Inspection classification 9 7:2 Factory inspection 9 7:3 Type inspection 10 8 Signs, instructions for use, packaging, transportation and storage 10 8:1 Sign 10 8:2 Instruction Manual 11 8:3 Packaging 11 8:4 Transport 11 8:5 Storage 11forewordThis document is in accordance with the provisions of GB/T 1:1-2020 "Guidelines for Standardization Work Part 1: Structure and Drafting Rules for Standardization Documents" drafting: This document replaces GB/T 25419-2010 "Pneumatic Fruit Tree Pruning Machine": Compared with GB/T 25419-2010, except for structural adjustment and In addition to editorial changes, the main technical changes are as follows: a) The scope of application has been changed (see Chapter 1, Chapter 1 of the:2010 edition); b) The chapter "Classification, Modeling and Basic Parameters" has been added (see Chapter 4); c) The technical requirements for electric fruit tree pruning machines have been added, and the requirements and parameters for pneumatic fruit tree pruning machines have been changed (see Chapter 5,:2010 edition Chapter 3); d) Some test methods have been changed (see Chapter 6, Chapter 4 of the:2010 edition); e) Changed the inspection rules (see Chapter 7, Chapter 5 of the:2010 edition); f) Added packaging requirements for a single unit (see Chapter 8): Please note that some contents of this document may refer to patents: The issuing agency of this document assumes no responsibility for identifying patents: This document is proposed by China Machinery Industry Federation: This document is under the jurisdiction of the National Agricultural Machinery Standardization Technical Committee (SAC/TC201): This document is drafted by: Ningbo Ningjia Agricultural Machinery Co:, Ltd:, Hangzhou Vocational and Technical College, Xinjiang Uygur Autonomous Region Agricultural and Animal Husbandry Machinery Quality Supervision and Management Station, Zhejiang Guyuehu Industry and Trade Co:, Ltd:, Zhejiang Huangjia Garden Tools Manufacturing Co:, Ltd:, Hunan Ningjia Electromechanical Co:, Ltd: Division, Dongguan Jiahang Industrial Co:, Ltd:, Zhejiang Dongqiao Precision Machinery Co:, Ltd:, Zhejiang Changxu Industry and Trade Co:, Ltd: The main drafters of this document: Shi Yunbin, Fang Peiqiang, Shi Jiefan, Ding Zhixin, Gao Yan, Hu Wenyong, Tang Enchang, Wang Dingjun, Ma Xianpeng, Xu Senyan, Lei Chunliu: This document was first published in:2010, and this is the first revision: fruit tree pruning machine1 ScopeThis document specifies the classification, basic parameters and types of fruit tree pruning machines (hereinafter referred to as pruning machines) that use oscillating blades to complete the cutting of branches: Numbering, technical requirements, test methods, inspection rules, signs, instructions for use, packaging, transportation and storage: This document is applicable to power supply with a special battery pack with a nominal voltage not greater than DC 75V or with a voltage not higher than 1:0MPa compressed air supply, one-handed pruning machine: For high-altitude operations, electric or pneumatic pruning machines with extension poles can be implemented as a reference: A pruning machine that obtains electric energy from a common storage battery through a special cable can be implemented as a reference: This document does not apply to: ---Pruning shears whose blades cut branches in a reciprocating linear motion; --- Pruning machines for cutting branches with rotary saw blades; ---Electric pruning machines that directly use power frequency alternating current as a power source; ---Pruning shears that only use the grip of the holding hand to cut; ---Pruning machines with only two moving blades and no fixed blades:2 Normative referencesThe contents of the following documents constitute the essential provisions of this document through normative references in the text: Among them, dated references For documents, only the version corresponding to the date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to this document: GB/T 230:1 Rockwell hardness test for metallic materials - Part 1: Test method GB/T 1911 copy paper GB/T 3883:1-2014 Safety of Handheld, Portable Power Tools and Garden Tools Part 1: General Requirements GB/T 4208 enclosure protection level (IP code) GB/T 5171:21 Small power motors Part 21: General test methods GB/T 5171:22 Small power motors - Part 22: Test methods for permanent magnet brushless DC motors GB/T 9480 Rules for compiling instruction manuals of agricultural and forestry tractors and machinery, lawn and gardening power machinery GB 10396 Agricultural and Forestry Tractors and Machinery, Lawn and Garden Power Machinery Safety Signs and Hazard Graphics General Rules GB/T 11918:1 Industrial plugs, sockets and couplers - Part 1: General requirements GB/T 13384 General Technical Specifications for Packaging of Mechanical and Electrical Products GB/T 15092:101-2020 Appliance Switches Part 1-1: Requirements for Mechanical Switches GB/T 21418 General technical requirements for permanent magnet brushless motor system GB/T 22076-2008 Pneumatic Cylindrical Quick Change Connector Plug Connection Dimensions, Technical Requirements, Application Guidelines and Tests GB/T 30426 Storage batteries and batteries containing alkaline or other non-acid electrolytes Portable lithium batteries and batteries GB/T 34570:1 Safety of rechargeable battery packs and chargers for electric tools Part 1: Safety of battery packs GB/T 34570:2 Safety of rechargeable battery packs and chargers for electric tools - Part 2: Safety of chargers GB/T 39568 General Technical Requirements for Driving Micromotors JB/T 8574 Agricultural Machinery Product Model Compilation Rules ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 25419-2023_English be delivered?Answer: Upon your order, we will start to translate GB/T 25419-2023_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 25419-2023_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 25419-2023_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 25419-2023?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 25419-2023 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
