GB/T 25392-2024 English PDFUS$514.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 25392-2024: Agricultural engineering - Electrical and electronic equipment - Testing resistance to environmental conditions Status: Valid GB/T 25392: Historical versions
Basic dataStandard ID: GB/T 25392-2024 (GB/T25392-2024)Description (Translated English): Agricultural engineering - Electrical and electronic equipment - Testing resistance to environmental conditions Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: B90 Classification of International Standard: 65.060.99 Word Count Estimation: 26,256 Date of Issue: 2024-04-25 Date of Implementation: 2024-11-01 Older Standard (superseded by this standard): GB/T 25392-2010 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 25392-2024: Agricultural engineering - Electrical and electronic equipment - Testing resistance to environmental conditions---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. ICS 65:060:99 CCSB90 National Standards of People's Republic of China Replace GB/T 25392-2010 Agricultural Engineering Electrical and Electronic Equipment Environmental resistance test (ISO 15003:2019,IDT) Released on 2024-04-25 2024-11-01 Implementation State Administration for Market Regulation The National Standardization Administration issued ForewordThis document is in accordance with the provisions of GB/T 1:1-2020 "Guidelines for standardization work Part 1: Structure and drafting rules for standardization documents" Drafting: This document replaces GB/T 25392-2010 "Durability test of agricultural engineering electrical and electronic equipment to environmental conditions" and Compared with GB/T 25392-2010, in addition to structural adjustments and editorial changes, the main technical changes are as follows: a) The scope has been changed (see Chapter 1, Chapter 1 of the:2010 edition); b) Changed the term "impaired function" to "malfunction", "basic assembly structure" to "standard configuration", and changed some terms The definition of "portable device" has been deleted (see Chapter 3, Chapter 3 of the:2010 edition); c) The “General Requirements” has been changed (see Chapter 4, Chapter 4 of the:2010 edition); d) The relevant provisions of “Testing” have been changed (see Chapter 5, Chapter 5 of the:2010 edition): This document is equivalent to ISO 15003:2019 "Environmental testing for electrical and electronic equipment in agricultural engineering": Please note that some of the contents of this document may involve patents: The issuing organization of this document does not assume the responsibility for identifying patents: This document was proposed by the China Machinery Industry Federation: This document is under the jurisdiction of the National Technical Committee for Agricultural Machinery Standardization (SAC/TC201): This document was drafted by: Shandong Jindafeng Machinery Co:, Ltd:, China Agricultural Mechanization Research Institute Group Co:, Ltd:, Tai'an Jiahe Heavy Industry Machinery Co:, Ltd:, Xiamen Yesheng Electric Co:, Ltd:, Guangdong Dangjia Intelligent Electric Co:, Ltd:, Guangdong Chengxing Testing Co:, Ltd:, Zhejiang Jiangqimai New Materials Co:, Ltd:, Guangdong Xueying Electric Co:, Ltd:, Huanghuai University, Handan Vocational College of Science and Technology, Dongguan Xinhan Precision Industry Co:, Ltd: Co:, Ltd:, Shenzhen Shengrui Technology Co:, Ltd:, Zhongsu Technology Co:, Ltd:, Henan Danong Water Saving Technology Co:, Ltd:, Heilongjiang Huida Technology Technology Development Co:, Ltd:, Taishan Intelligent Manufacturing Industry Research Institute, Tai'an Planning and Compilation Research Center, Linyi Inspection and Testing Center, Gudong Technology Co:, Ltd:, Guanxian Taixin Machinery Manufacturing Co:, Ltd: The main drafters of this document are: Wei Fukui, Zeng Li, Liu Wei, Lü Shusheng, Nie Honglei, Wu Haiming, Wang Caixia, Liu Wenfu, Sun Yunda, Yang Yating, Ma Guangbin, Zhang Qi, Ye Qinci, Jiang Huixing, Wang Shanshan, Pi Kunlin, Nie Hongxia, Xie Chengzhi, Gong Fei, Zhang Yu, Zhang Peng, Song Chengfa, Wen Yunzhan, Chang Guangmin, Cui Haitao and Wei Yuanchao: This document was first published in:2010 and this is the first revision: Agricultural Engineering Electrical and Electronic Equipment Environmental resistance test1 ScopeThis document specifies the electrical and electronic equipment for mobile (including handheld) agricultural machinery, forestry machinery, horticultural machinery (hereinafter referred to as machinery) The machinery in this document includes tractors and their associated implements: This document describes the test methods for specific environmental conditions: The severity level of environmental conditions is given according to the extreme environmental conditions that may be encountered in the actual operation of mechanical equipment: This document is applicable to testing the suitability of mechanical equipment under specific environmental conditions: Note: The severity levels given in this document are general guidelines only and do not guarantee the worst environmental conditions:2 Normative referencesThe contents of the following documents constitute the essential clauses of this document through normative references in this document: For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to This document: GB/T 2421-2020 Overview and Guidelines for Environmental Testing (IEC 60068-1:2013, IDT) Note: GB/T 21398-2008 Test methods and acceptance rules for electromagnetic compatibility of agricultural and forestry machinery (ISO 14982:1998, IDT) ISO 16750 (all parts) Environmental conditions and tests for electrical and electronic equipment of road vehicles (Road vehicles-Environment- Note: GB/T 28046 (all parts) Environmental conditions and tests for electrical and electronic equipment of road vehicles [ISO 16750 (all parts)] IEC 60068-2-5:2018 Environmental testing Part 2-5: Test methods Test S: Simulated solar radiation on the ground and the sun Note: GB/T 2423:24-2022 Environmental testing Part 2: Test methods Test S: Simulated solar radiation on the ground and solar radiation test and climate Weathering test guide (IEC 60068-2-5:2018, IDT) IEC 60068-2-6 Environmental testing Part 2-6: Test methods Test Fc: Vibration (sinusoidal) Note: GB/T 2423:10-2019 Environmental testing Part 2: Test methods Test Fc: Vibration (sinusoidal) (IEC 60068-2-6:2007, IDT) Part 2-11:Tests-TestKa:Saltmist) Note: GB/T 2423:17-2008 Environmental testing for electric and electronic products Part 2: Test methods Test Ka: Salt spray (IEC 60068-2-11: 1981,IDT) Part 2-13: Tests-TestM: Low air pressure) Note: GB/T 2423:21-2008 Environmental testing for electric and electronic products Part 2: Test methods Test M: Low pressure (IEC 60068-2-13: 1983,IDT) ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 25392-2024_English be delivered?Answer: Upon your order, we will start to translate GB/T 25392-2024_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 25392-2024_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 25392-2024_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 25392-2024?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 25392-2024 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
