GB/T 25162.2-2010 English PDF

US$194.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 25162.2-2010: Sacks -- Drop test -- Part 2: Sacks made from thermoplastic flexible film
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 25162.2-2010	194	Add to Cart	3 days	Sacks -- Drop test -- Part 2: Sacks made from thermoplastic flexible film	Valid

Similar standards

GB 23350   GB/T 25163   GB/T 25322   GB/T 25160   GB/T 25159   GB/T 25162.1   

Basic data

Standard ID: GB/T 25162.2-2010 (GB/T25162.2-2010)
Description (Translated English): Sacks -- Drop test -- Part 2: Sacks made from thermoplastic flexible film
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: A80
Classification of International Standard: 55.020
Word Count Estimation: 10,125
Date of Issue: 2010-09-26
Date of Implementation: 2011-03-01
Quoted Standard: GB/T 4857.2; ISO 7023
Adopted Standard: ISO 7965-2-1993, IDT
Regulation (derived from): Announcement of Newly Approved National Standards No. 6 of 2010 (total 161)
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the method of through fall full thermoplastic flexible film bags for vertical impact test methods, the method of vertical impact both as thermoplastic flexible film on the impact of single- filling test, measurement can be used as thermoplastic flexible film containing dangerous vertical impact resistance of the circulation system is an integral part of the series of tests, this section provides test equipment, test procedures and test reports the contents of this section apply only to thermoplastic flexible film bag,

GB/T 25162.2-2010: Sacks -- Drop test -- Part 2: Sacks made from thermoplastic flexible film

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Sacks test Part 2. Sacks made from thermoplastic flexible film ICS 55.020 A80 National Standards of People's Republic of China Bag drop test Part 2. thermoplastic flexible film bag Sacks-Droptest- Part 2. Sacksmadefromthermoplasticflexiblefilm (ISO 7965-2.1993, IDT) Issued on. 2010-09-26 2011-03-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

GB/T 25162 "bag drop test" is divided into two parts. --- Part 1. paper bag; --- Part 2. thermoplastic flexible film bag. This is Part 2 GB/T 25162 of. This part identical with ISO 7965-2.1993 "bag drop test - Part 2. thermoplastic flexible film bag" (in English). For ease of use, this standard made the following editorial changes. a) As used in place of a decimal point, '' ''; b) Remove the preface to the international standards; c) a reference document by the GB/T 4857.2 instead of ISO 2233.2000. This part of the Annex A, Annex B, Annex C is informative appendix. This part of the National Packaging Standardization Technical Committee (SAC/TC49) and focal points. This section drafted by. China Packaging Research & Test Center, Mechanical Science Research Institute, China Packaging Federation. The main drafters of this section. Li Hua, Li Tiesheng, cattle Shumei, Yuan Wen Guang, Wang Li, Wang Qing, Zhu Jing. Bag drop test Part 2. thermoplastic flexible film bag

1 Scope

This section GB/T 25162 specifies the test side by vertical impact drop method of Full thermoplastic flexible film bag law. This method can be used not only on the vertical impact study thermoplastic flexible film bag of single tests can also be used as a measurement of the thermoplastic soft Quality film bag containing the dangerous impact of vertical circulation system, an integral part of a series of resistance tests. This section specifies the content of the test equipment, test procedures and test reports. This section only applies to soft thermoplastic film bags.

2 Normative references

The following documents contain provisions which, through GB/T 25162 in this part of the reference in terms of this section. For dated reference documents Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this section. GB/T 4857.2 Transport packages temperature and humidity conditioning (GB/T 4857.2-2005, ISO 2233.2000, MOD) ISO 7023 bags empty bag inspection and sampling methods Principle 3 After a rigid plane above the lift bag full release of its free fall on the plane. Atmospheric conditions during the test, the drop height Degree and location of the package are pre-configured.

4 Test Equipment

Drop test equipment required in Appendix A in Fig. 4.1 lifting device Test samples are not damaged during lifting or release test sample. 4.2 support means Means for supporting the test sample prior to release should make the test sample in a predetermined position. Supporting the test sample different methods, such as the test sample from the upper end of its lifting, or from the bottom to hold up, the impact on test samples Role circumstances vary widely. Thus supporting method test samples shall be stated in the test report. 4.3 release device The device should enable the test sample before releasing the whereabouts strike impact table is not touching any part of the device fall freely. 4.4 Impact mesa It should have a certain level of quality rigid, so as not to move during the test, no deformation. Typically, the impact should table. a) block, its quality should be at least 50 times the most important test of the quality of the bag; b) a flat, table height difference between any two points on the horizontal must not exceed 2mm; c) strong, static load 10kg placed on any area of \u200b\u200b100mm2 table, the deformation should not exceed 0.1mm; ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 25162.2-2010_English be delivered?

Answer: Upon your order, we will start to translate GB/T 25162.2-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 25162.2-2010_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 25162.2-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.