GB/T 24820-2024 English PDFUS$539.00 ยท In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 24820-2024: General technical requirements for laboratory furniture Status: Valid GB/T 24820: Historical versions
Basic dataStandard ID: GB/T 24820-2024 (GB/T24820-2024)Description (Translated English): General technical requirements for laboratory furniture Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: Y81 Classification of International Standard: 97.140 Word Count Estimation: 26,281 Date of Issue: 2024-06-29 Date of Implementation: 2025-01-01 Older Standard (superseded by this standard): GB 24820-2009 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 24820-2024: General technical requirements for laboratory furniture---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.ICS 97.140 CCSY81 National Standards of People's Republic of China Replaces GB 24820-2009 General technical requirements for laboratory furniture Released on 2024-06-29 2025-01-01 Implementation State Administration for Market Regulation The National Standardization Administration issued Table of ContentsPreface III 1 Scope 1 2 Normative references 1 3 Terms and Definitions 1 4 Symbols 2 5 Product Categories 4 6 Requirements 4 7 Test methods 7 8 Laboratory Benches and Storage Cabinets Design and Installation Guidelines 12 9 Inspection Rules 12 10 Labeling, instructions for use, packaging, transportation and storage 13 Appendix A (Informative) Design and Installation Guide for Laboratory Benches and Storage Cabinets 15 References 19ForewordThis document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents" Drafting. This document replaces GB 24820-2009 "General Technical Requirements for Laboratory Furniture". Compared with GB 24820-2009, except for structural adjustments and In addition to editorial changes, the main technical changes are as follows. a) The scope of non-application has been changed (see Chapter 1, Chapter 1 of the.2009 edition); b) Modified normative references. Updated according to the changes in the referenced documents or the referenced document year (see Chapter 2,.2009 Chapter 2 of the.2011 edition); c) Changed terms and definitions. deleted structure, operating surface, facility area, etc.; added laboratory furniture, laboratory bench and storage cabinet (see Chapter 3, Chapter 3 of the.2009 edition); d) Changed symbols. symbols such as total depth of countertop, reagent (or equipment) rack suspension depth, facility area depth and countertop width have been deleted. Its description; added the definition and explanation of the symbols for the net width, net depth and net height of the test bench leg space, knee space and foot space Ming (see Chapter 4, Chapter 4 of the.2009 edition) e) The classification has been changed (see 5.1, 5.2, 5.3, 5.1, 5.2, 5.3 of the.2009 edition), and the classification by console layout has been deleted (see Version 5.4); f) The main dimensions have been changed (see 6.1 Table 2, No. 2, No. 6 to No. 10 in 6.1 Table 2 of the.2009 edition). The table width has been deleted. Depth, facility area depth, reagent (or equipment) rack suspension depth, operating table bottom plate height from the ground (see 6.1 Table 2 of the.2009 version) No. 1, No. 3, No. 4~No. 5, No. 11); g) The main dimensions and dimensional deviations, shape and position tolerances have been changed (see 6.2, 6.2 of the.2009 edition) h) The appearance requirements have been changed (see 6.3.1 to 6.3.5, 6.3 of the.2009 edition), and the requirements for plastic parts and stone parts have been added (see 6.3.6, 6.3.7); i) The safety performance requirements and test methods have been changed (see 6.4, 7.4.3, 6.6, 8.4.5 of the.2009 edition), and the test method for retained liquid has been added. Requirements for test bench surfaces and test bench handles (see 6.4.6); j) The flame retardancy requirements and test methods have been deleted (see 6.7 and 8.4.6 of the.2009 edition); k) Deleted the requirements and test methods for drainage pipes, aging resistance, crack resistance, and anti-static properties of physical laboratory tables (see the.2009 edition 6.8.1~6.8.3 and 8.4.7 Table 11, No. 1, No. 2); l) The physical and chemical performance requirements and test methods have been changed (see 6.5, 7.4.4, 6.8, 8.4.7 of the.2009 edition), and the durability of plastic materials has been increased. Requirements and test methods for aging and impact strength (see 6.5.1.6, 7.4.4.6); m) The mechanical property requirements and test methods have been changed (see 6.6, 7.4.5, 6.9, 8.4.8 of the.2009 edition), and the mechanical properties of the test bench have been added. The requirements for the test sequence (see 7.4.5.1, 7.4.5.2) have been added, and the durability test of the height adjustment device of the independent test bench and the foot test have been added. Wheel reciprocating durability test (see Table 6 of 7.4.5.2); n) The requirements for test specimens have been changed (see 7.1, 8.1 of the.2009 edition); o) Deleted the test report (see 8.5 of the.2009 edition); p) The design and installation guidelines have been changed (see Chapter 8, Chapter 7 of the.2009 edition); q) The content of the mark has been changed (see 10.1, 10.1 of the.2009 edition); r) The instructions for use have been changed (see 10.2, 10.5 of the.2009 edition). Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents. This document was proposed by China Light Industry Federation. This document is under the jurisdiction of the National Furniture Standardization Technical Committee (SAC/TC480). This document was drafted by. Beijing Furniture Industry Association, Shanghai Quality Supervision and Inspection Technology Research Institute, Hebei Fudu Huachuang Furniture Manufacturing Co., Ltd. Co., Ltd., Zhejiang Hutong Ergonomics Technology Co., Ltd., Beijing Sunrise Tianmu Furniture (Shenzhou) Co., Ltd., Xuele Technology (Jin Hua) Co., Ltd., Beijing Product Quality Supervision and Inspection Institute, China Furniture Association, Beijing Liming Stationery Furniture Co., Ltd., Jiangxi Jinhu Insurance Equipment Group Co., Ltd., Yusheng Furniture Co., Ltd., Shanghai Dafeng Laboratory Equipment Co., Ltd., Beijing Mingyuan Noel Technology Co., Ltd. Shandong Oupu Technology & Trade Co., Ltd., Beijing Sunray Borui Laboratory Equipment Co., Ltd., Jiangxi Guangzheng Metal Equipment Group Co., Ltd., Jiangxi Wanxiang Furniture Group Co., Ltd., Jiangxi Yuanda Insurance Equipment Industry Group Co., Ltd., Beijing Liri Office Supplies Co., Ltd., Pan American Laboratory Systems Technology Co., Ltd., Jiali Xinde Furniture Co., Ltd., Zibo Haomai Laboratory Equipment Co., Ltd., Tangshan Hengli Furniture Co., Ltd., Beijing Huadu Jiamei Intelligent Technology Co., Ltd., Shenzhen Hongyi Construction Group Co., Ltd., Jirong Furniture Co., Ltd., Beijing Huaaoshengshi Furniture Co., Ltd., Hebei Shuntian Intelligent Technology Development Group Co., Ltd., Beijing Weisen Shengye Furniture Co., Ltd., Guangdong Tianciwan Laboratory Equipment Manufacturing Co., Ltd., Beijing Oriental Zhongkeda Technology Co., Ltd., Hebei Fuzhen Industrial Co., Ltd., Beijing Hui Huang Furniture Group Co., Ltd., Beijing Xinguojing Office Furniture Co., Ltd., Beijing Dishang International Decoration Design Co., Ltd., Beijing Zhongjian Huateng Decoration Engineering Co., Ltd., Suining County Shaji Town E-commerce Association, Beijing Construction Machinery Asset Management Co., Ltd. Xisanqi Branch, Beijing Zhongying Tong Information Technology Co., Ltd., Fenghejian Environmental Art Design (Beijing) Co., Ltd. The main drafters of this document are. He Fajian, Luo Jufen, Hao Hongyang, Huang Pengfei, Guo Jianqiang, Li Weibing, Li Shengguo, Cao Fengyu, Sun Jin, Yang Lei, Qu Guangbing, Sun Shudong, Ma Shanzhi, Xiong Bolin, Wang Zhaojun, Wang Wenfeng, Guo Hongbo, Jiang Guoliang, Liu Xiaojian, Hu Xiuwen, Jiang Zilan, Xiao Min, Yang Bo, Chen Guohua, Xu Di, Zhang Fengyan, Zhao Zhixian, Gao Ruite, Wang Hui, Ni Yongqing, Zhu Min, Tan Kaixuan, Zhu Jiang, Luo Jihong, Ren Shuqin, Cheng Yu, Shi Haidong, Shi Rongzhou, Weng Zhenhui, Yan Han, Liu Jianping, Li Aiwen, Meng Qingfeng, Liang Shuqiang, Chen Deyi, Zhu Jianwu, Zhang Lei, Ma Qianyi, Li Chaoxia, and Wang Shuifa. The previous versions of this document and the documents it replaces are as follows. ---First published in.2009 as GB 24820-2009; ---This is the first revision. General technical requirements for laboratory furniture1 ScopeThis document specifies the product classification, requirements, design and installation guidelines, inspection rules, marking, instructions for use, packaging and transportation of laboratory furniture. and storage, and describes the test methods. This document applies to the design, production, installation, sales and quality inspection and evaluation of laboratory benches and storage cabinets. This document does not apply to furniture for special laboratory use. Examples. Special laboratories, such as those for assessment of ageing, degradation, heating effects, ergonomics and fire protection.2 Normative referencesThe contents of the following documents constitute the essential clauses of this document through normative references in this document. For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to This document. GB/T 250 Textiles - Grey scale for colour fastness tests GB/T 1043.1-2008 Determination of impact properties of simply supported plastic beams Part 1.Non-instrumented impact test GB/T 3324 General technical requirements for wooden furniture GB/T 3325 General technical requirements for metal furniture GB/T 2828.1-2012 Sampling procedures for inspection by attributes Part 1.Sampling for batch inspection based on acceptance quality limit (AQL) plan GB/T 10357.1-2013 Furniture mechanical properties test Part 1.Strength and durability of tables GB/T 10357.4-2023 Furniture mechanical properties test Part 4.Cabinet stability GB/T 10357.5-2023 Furniture mechanical properties test Part 5.Cabinet strength and durability GB/T 10357.7-2013 Furniture mechanical properties test Part 7.Table stability GB 15763.2 Safety glass for building Part 2.Tempered glass GB/T 16422.2 Plastics laboratory light source exposure test method Part 2.Xenon arc lamp GB/T 17657-2022 Test methods for physical and chemical properties of wood-based panels and veneer wood-based panels GB 18584 Limits of Hazardous Substances in Furniture GB/T 21747-2008 Safety requirements and test methods for teaching laboratory equipment test benches (tables) GB 28008 Technical Specification for Furniture Structure Safety GB/T 28202-2020 Furniture Industry Terminology GB/T 32487-2016 General technical requirements for plastic furniture GB/T 33282-2016 General technical requirements for indoor stone furniture GB/T 38607-2020 Test methods for stability, strength and durability of office furniture tables and desks3 Terms and definitionsThe terms and definitions defined in GB/T 28202-2020 and the following apply to this document. 3.1 Laboratory furniture laboratoryfurniture Furniture used for laboratory test operations and for placing instruments and materials. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 24820-2024_English be delivered?Answer: Upon your order, we will start to translate GB/T 24820-2024_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 24820-2024_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 24820-2024_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 24820-2024?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 24820-2024 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
