GB/T 24821-2024 English PDFUS$409.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 24821-2024: Dining tables and chairs Status: Valid GB/T 24821: Historical versions
Basic dataStandard ID: GB/T 24821-2024 (GB/T24821-2024)Description (Translated English): Dining tables and chairs Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: Y80 Classification of International Standard: 97.140 Word Count Estimation: 20,298 Date of Issue: 2024-10-26 Date of Implementation: 2025-05-01 Older Standard (superseded by this standard): GB/T 24821-2009 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 24821-2024: Dining tables and chairs---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT24821-2024ICS 97.140 CCSY80 National Standard of the People's Republic of China Replaces GB/T 24821-2009 Dining table and chairs Released on October 26, 2024 Implementation on May 1, 2025 State Administration for Market Regulation The National Standardization Administration issued PrefaceThis document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents" Drafting. This document replaces GB/T 24821-2009 "Dining tables and chairs". Compared with GB/T 24821-2009, except for structural adjustments and editorial changes, In addition to the dynamic, the main technical changes are as follows. a) The scope has been changed (see Chapter 1, Chapter 1 of the.2009 edition); b) The definitions of “turntable” and “turntable” in the Terms and Definitions have been deleted (see 3.1 and 3.2 of the.2009 edition); c) Deleted the dimensional tolerance, tabletop width, tabletop depth, tabletop height, and round tabletop diameter in the main dimensions and limit deviation requirements. 2.The provisions for the diameter, width, height, depth and diameter of the round stool surface (see Table 1 of the.2009 edition); d) Added dimensional requirements for the inner width of armrests of armchairs, the clearance height under tables, and the height difference between the seat surfaces of chairs and stools (see Table 1); e) The minimum distance and limit deviation between the edge of the round table top and the edge of the turntable have been changed (see Table 1, Table 1 of the.2009 edition); f) Added requirements and test methods for consistency between physical objects and labels (see 5.3.1 and 6.3.1); g) Added appearance requirements for ceramic rock slabs (see Table 3); h) Added requirements and test methods for moisture resistance, heat resistance and pollution resistance of soft and hard coverings (see Table 4, 6.5.5.3 and 6.5.5.5); i) Added surface physical and chemical property requirements and test methods for stone, ceramic slabs, and glass (see Table 4, 6.5.6, and 6.5.7); j) The provisions on surface bonding strength in the surface physical and chemical properties have been deleted (see Table 4 of the.2009 edition); k) Changed the requirements and test methods for strength and durability of tables and chairs (see 5.6 and 6.6, 5.5 and 6.5.1); l) The requirements and test methods for turntable impact strength have been deleted (see Table 5 and 6.5.3 of the.2009 edition); m) Added structural safety performance requirements and test methods (see 5.7 and 6.7); n) The requirements and test methods for the limits of hazardous substances in furniture have been changed (see 5.8 and 6.8, and 5.6 and 6.6 of the.2009 edition); o) Added requirements and test methods for electrical safety and electromagnetic compatibility of dining tables and chairs (see 5.9, 5.10, 6.9 and 6.10); p) The test method for wood moisture content has been changed (see 6.3.2, 6.4.1 of the.2009 edition); q) The test method for dry heat resistance of glass surface has been changed (see 6.5.7, Appendix B of the.2009 edition). Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents. This document was proposed by the China Light Industry Federation. This document is under the jurisdiction of the National Furniture Standardization Technical Committee (SAC/TC480). This document was drafted by. Shanghai Quality Supervision and Inspection Technology Research Institute, Chengdu Product Quality Supervision and Inspection Research Institute, Quanyoujia Private Co., Ltd., Mingzhu Furniture Co., Ltd., Guangdong Lin's Home Furnishing Co., Ltd., Sichuan Product Quality Supervision and Inspection Institute, San Ao Ke Technology Co., Ltd., Jiaxing De Rucci Smart Home Co., Ltd., Chengdu Huihong Technology Group Co., Ltd., Gujia Furniture Co., Ltd., Jiangxi Provincial Quality and Standardization Research Institute, Chengdu Debang Bopai Furniture Co., Ltd., Guangdong Mingliu Ceramics Co., Ltd., Chengdu Deyi Industrial Co., Ltd. Company, China Furniture Association, Chengdu Gengxin Furniture Co., Ltd., Nanjing Forestry University, Chengdu Sitong Ruikun Technology Co., Ltd., Yongheng Technology Group Co., Ltd., Chengdu Anjutianxia Industrial Co., Ltd., Chengdu Haofengjing Home Furnishing Co., Ltd., Dongguan City Quality Supervision and Inspection Measurement center. The main drafters of this document are. Cheng Yunbin, Yu Hong, Liu Jie, Li Jiatao, Wang Jie, Zhang Youquan, Wang Zhanqiang, Huang Haolai, Zhang Xujun, Wang Liping, Zeng Zhizhong, Tu Jiahui, Zhou Xueli, Yang Liemao, Qiu Churui, Wang Jiakun, Qu Guangbing, Song Zunyou, Wu Zhihui, Yang Chuanjuan, Wu Jiabing, Yang Shijun, Chen Cai and Jing Jun. The previous versions of this document and the documents it replaces are as follows. ---First published in.2009 as GB/T 24821-2009; ---This is the first revision. Dining table and chairs1 ScopeThis document specifies the classification, requirements, inspection rules, marking, instructions for use, packaging, transportation and storage of dining tables and chairs, and describes the test method. This document applies to the design, production, sales services and Quality control such as inspection and testing. This document does not apply to one-piece dining tables and chairs, or children's dining tables and chairs.2 Normative referencesThe contents of the following documents constitute the essential clauses of this document through normative references in this document. For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to This document. GB/T 1732-2020 Determination of impact resistance of paint films GB/T 1927.4-2021 Test methods for physical and mechanical properties of small, defect-free specimens of wood - Part 4.Determination of moisture content GB/T 2828.1-2012 Sampling procedures for inspection by attributes Part 1.Sampling for batch inspection based on acceptance quality limit (AQL) plan GB/T 3324 General technical requirements for wooden furniture GB/T 3325 General technical requirements for metal furniture GB 4343.1 Electromagnetic compatibility requirements for household appliances, power tools and similar apparatus Part 1.Emission GB/T 4343.2 Electromagnetic compatibility requirements for household appliances, power tools and similar apparatus Part 2.Immunity GB/T 4706.1-2024 Household and similar electrical appliances - Safety - Part 1.General requirements GB 4706.29-2008 Particular requirements for safety of portable induction cookers for household and similar electrical appliances GB/T 4893.1-2021 Tests for physical and chemical properties of furniture surface paint films Part 1.Determination of cold liquid resistance GB/T 4893.2-2020 Tests for physical and chemical properties of furniture surface paint films Part 2.Determination of resistance to moisture and heat GB/T 4893.3-2020 Tests for physical and chemical properties of furniture surface paint films Part 3.Determination of dry heat resistance GB/T 4893.4-2023 Tests for physical and chemical properties of furniture surface paint films Part 4.Determination of adhesion by cross-cut method GB/T 4893.7-2013 Tests for physical and chemical properties of furniture surface paint films Part 7.Determination of resistance to hot and cold temperature differences GB/T 4893.8-2023 Furniture surface physical and chemical properties test Part 8.Determination of abrasion resistance GB/T 4893.9-2013 Tests for physical and chemical properties of furniture surface paint films Part 9.Determination of impact resistance GB/T 5296.6 Instructions for use of consumer products Part 6.Furniture GB/T 6739-2022 Paints and varnishes - Determination of film hardness by the pencil method GB/T 9286-2021 Paints and varnishes - Cross-cut test GB/T 9985-2022 Detergents for hand-washing dishes GB/T 10357.1-2024 Furniture mechanical properties test Part 1.Tables strength and durability GB/T 10357.2 Mechanical properties of furniture - Part 2.Stability of chairs and stools GB/T 10357.3-2013 Furniture mechanical properties test Part 3.Strength and durability of chairs and stools GB/T 10357.7-2013 Furniture mechanical properties test Part 7.Table stability ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 24821-2024_English be delivered?Answer: Upon your order, we will start to translate GB/T 24821-2024_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 24821-2024_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 24821-2024_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 24821-2024?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 24821-2024 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
