GB/T 24977-2024 English PDFUS$539.00 ยท In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 24977-2024: General technical requirements for bathroom furniture Status: Valid GB/T 24977: Historical versions
Basic dataStandard ID: GB/T 24977-2024 (GB/T24977-2024)Description (Translated English): General technical requirements for bathroom furniture Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: Y81 Classification of International Standard: 97.140 Word Count Estimation: 26,227 Date of Issue: 2024-06-29 Date of Implementation: 2025-01-01 Older Standard (superseded by this standard): GB 24977-2010 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 24977-2024: General technical requirements for bathroom furniture---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.ICS 97.140 CCSY81 National Standards of People's Republic of China Replaces GB 24977-2010 General technical requirements for bathroom furniture Released on 2024-06-29 2025-01-01 Implementation State Administration for Market Regulation The National Standardization Administration issued Table of ContentsPreface III 1 Scope 1 2 Normative references 1 3 Terms and Definitions 2 4 Product Categories 2 5 Basic Requirements 3 6 Safety requirements (basic items) 7 7 Installation Requirements (Basic Items) 8 8 Test methods 8 9 Inspection Rules 15 10 Packaging, transportation, storage and instructions for use 16 Appendix A (Informative) Examples of Bathroom Furniture and Equipment Components of Cabinets and Frames 18 Appendix B (Informative) Main standards for common bathroom furniture accessories 19ForewordThis document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents" Drafting. This document replaces GB 24977-2010 "Bathroom Furniture". Compared with GB 24977-2010, except for structural adjustments and editorial changes, In addition, the main technical changes are as follows. a) The product classification has been changed (see Chapter 4, Chapter 4 of the.2010 edition); b) The appearance requirements have been changed (see 5.2, 5.2 of the.2010 edition); c) Deleted the accessory requirements (contract items) (see 5.3 of the.2010 edition); d) The requirements for resistance to cigarette burns and their test methods have been deleted (see 5.4.1, 5.4.2, and 6.4.1.5 of the.2010 edition); e) The physical and chemical performance requirements and test methods for basin countertops have been changed (see 5.3, 8.3.1, 5.4.1, 6.4.1 of the.2010 edition); f) Added physical and chemical performance requirements and test methods for the seats of chairs and stools (see 5.3 and 8.3.2); g) Changed the project name and test method of the paint (plastic) coating on the surface of metal parts of the product (see 5.3, 8.3.6,.2010 edition 5.4.2, 6.4.2.3); h) The name of the item of water absorption thickness expansion rate of artificial board has been changed (see 5.3, 5.4.2 of the.2010 edition); i) Added physical and chemical performance requirements and test methods for metal transfer film layers and plastic parts (see 5.3, 8.3.8, 8.3.9); j) The mechanical property requirements and test methods have been changed (see 5.5, 8.6, 5.6, 6.6 of the.2010 edition); k) The health and safety requirements and test methods have been changed (see Chapter 6, 8.5, 5.7 and 6.7 of the.2010 edition); l) The installation and use requirements and installation acceptance inspection have been changed (see Chapter 7, 5.8, 6.8, 7.4 of the.2010 edition); m) The water resistance test method has been changed (see 8.4, 6.5 of the.2010 edition); n) The inspection rules have been changed (see Chapter 9, Chapter 7 of the.2010 edition); o) The marking requirements have been deleted (see 8.1 of the.2010 edition). Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents. This document was proposed by China Light Industry Federation. This document is under the jurisdiction of the National Furniture Standardization Technical Committee (SAC/TC480). This document was drafted by. Zhejiang Light Industrial Products Quality Inspection Institute, Shanghai Quality Supervision and Inspection Technology Research Institute, Zhejiang Jindi Control Group Co., Ltd., Wenzhou EMI Home Furnishing Manufacturing Co., Ltd., China Furniture Association, Jomoo Kitchen & Bathroom Co., Ltd., Kohler (China) Investment Co., Ltd., Mingzhu Furniture Co., Ltd., Ningbo Bochu Integrated Kitchen Co., Ltd., Zhibang Home Furnishing Co., Ltd., Jiangxi Aifenda Warm Tong Technology Co., Ltd., Sofia Home Furnishing (Chengdu) Co., Ltd., Toto (China) Co., Ltd., Roca (China) Co., Ltd., Zhuhai Pu Lemei Kitchen & Bathroom Co., Ltd., Huida Sanitary Ware Co., Ltd., Hengjie Sanitary Ware Group Co., Ltd., Foshan Dongpeng Sanitary Ware Co., Ltd., Guangdong Shanggao Technology Co., Ltd., Foshan Meijiahua Ceramics Co., Ltd., and Ningbo Weilin Residential Facilities Co., Ltd. The main drafters of this document are. Luo Ligang, Zhong Wenhan, Luo Jufen, Tu Qi, Wang Lingjuan, Chen Xixi, Zhang Kuaiyue, Wang Wukang, Lin Xiaowei, Zhu Xuedan, Wang Jianbing, Fan Weizhong, Wu Fushe, Wu Jianbin, Wang Chong, Liu Chuan, Feng Zhihai, Chen Jianfa, Zhang Xuesong, Qiqiwang, Liao Yehan, Wang Yongqi, Huo Xintang, Yu Anping. The previous versions of this document and the documents it replaces are as follows. ---First published in.2010 as GB 24977-2010; ---This is the first revision. General technical requirements for bathroom furniture1 ScopeThis document specifies the product classification, basic requirements, safety requirements, installation requirements, inspection rules, packaging, transportation, storage and Instructions for use, describing the test method. This document applies to the quality control during the production, installation, inspection and sales of furniture for toilets and bathrooms, and other similar places The furniture used can be implemented for reference.2 Normative referencesThe contents of the following documents constitute the essential clauses of this document through normative references in this document. For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to This document. GB/T 250 Textiles - Grey scale for colour fastness tests GB/T 1043.1 Determination of impact properties of simply supported plastic beams Part 1.Non-instrumented impact test GB/T 1732 Determination of impact resistance of paint films GB/T 2411-2008 Plastics and hard rubber - Determination of indentation hardness (Shore hardness) using a durometer GB/T 2828.1-2012 Sampling procedures for inspection by attributes Part 1.Sampling for batch inspection based on acceptance quality limit (AQL) plan GB/T 3324-2017 General technical requirements for wooden furniture GB/T 4893.1 Tests for physical and chemical properties of furniture surface paint films Part 1.Determination of cold liquid resistance GB/T 4893.2 Tests for physical and chemical properties of furniture surface paint films Part 2.Determination of resistance to moisture and heat GB/T 4893.3 Tests for physical and chemical properties of furniture surface paint films Part 3.Determination of dry heat resistance GB/T 4893.4 Tests for physical and chemical properties of furniture surface paint films Part 4.Adhesion cross-cut test method GB/T 4893.7 Tests for physical and chemical properties of furniture surface paint films Part 7.Determination of resistance to temperature difference between hot and cold temperatures GB/T 4893.8-2023 Physical and chemical properties test of furniture surface paint film Part 8.Determination of abrasion resistance GB/T 4893.9 Physical and chemical properties of furniture surface paint films Part 9.Determination of impact resistance GB/T 6739 Paints and varnishes - Determination of film hardness by pencil method GB/T 9286 Paint and varnish cross-cut test GB/T 10357.1-2013 Furniture mechanical properties test Part 1.Strength and durability of tables GB/T 10357.2 Mechanical properties of furniture - Part 2.Stability of chairs and stools GB/T 10357.3 Mechanical properties test of furniture Part 3.Strength and durability of chairs and stools GB/T 10357.4 Mechanical properties test of furniture Part 4.Stability of cabinets GB/T 10357.5 Mechanical properties test of furniture Part 5.Strength and durability of cabinets GB/T 16422.2-2022 Plastics laboratory light source exposure test method Part 2.Xenon arc lamp GB/T 17657-2022 Test methods for physical and chemical properties of wood-based panels and veneer wood-based panels GB 18584 Limits of Hazardous Substances in Furniture ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 24977-2024_English be delivered?Answer: Upon your order, we will start to translate GB/T 24977-2024_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 24977-2024_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 24977-2024_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 24977-2024?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 24977-2024 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
