GB/T 2476-2025 English PDFUS$139.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 2476-2025: Conventional abrasive - Symbols Status: Valid GB/T 2476: Historical versions
Basic dataStandard ID: GB/T 2476-2025 (GB/T2476-2025)Description (Translated English): Conventional abrasive - Symbols Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: J43 Classification of International Standard: 25.100.70 Word Count Estimation: 6,695 Date of Issue: 2025-06-30 Date of Implementation: 2026-01-01 Older Standard (superseded by this standard): GB/T 2476-2016 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 2476-2025: Conventional abrasive - Symbols---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT2476-2025ICS 25.100.70 CCSJ43 National Standard of the People's Republic of China Replaces GB/T 2476-2016 Common abrasive code Released on June 30, 2025 Implementation on January 1, 2026 State Administration for Market Regulation The National Standardization Administration issued PrefaceThis document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents" Drafting. This document replaces GB/T 2476-2016 "Code for Common Abrasives". Compared with GB/T 2476-2016, except for the structural adjustment and editing In addition to the functional changes, the main technical changes are as follows. a) Added terms and definitions for various common abrasives (see Chapter 3); b) Deleted corundum and its code (see Table 1 of the.2016 edition); c) Added semi-brittle corundum and its code (see Table 1); d) Added various types of post-processing abrasives and their codes (see 4.2). Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents. This document was proposed by the China Machinery Industry Federation. This document is under the jurisdiction of the National Technical Committee for Standardization of Abrasives and Grinding Tools (SAC/TC139). This document was drafted by. Zhengzhou Abrasives and Grinding Tools Research Institute Co., Ltd., Zhengzhou Hongji Grinding Technology Co., Ltd., Pingdingshan Yichengxin Materials Co., Ltd., China National Machinery Industry Corporation, Nanping Yisheng New Materials Technology Co., Ltd., Nanping Yize Abrasives and Grinding Tools Co., Ltd. Technology Co., Ltd. The main drafters of this document are. Zhang Liang, Yu Jiayin, Bao Hua, Niu Wei, Tian Xiying, Su Yan, Chen Huailiang, Jiang Qingli, and Wu Jianwei. This document was first issued in 1981, revised for the first time in 1983, revised for the second time in.1994, and revised for the third time in.2016. Fourth revision. Common abrasive code1 ScopeThis document specifies the designations for common abrasives. This document applies to the marking of common abrasive categories.2 Normative referencesThe contents of the following documents constitute the essential clauses of this document through normative references in this document. For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to This document. GB/T 16458 Terminology of Abrasives and Grinding Tools3 Terms and DefinitionsThe terms and definitions defined in GB/T 16458 apply to this document.4 Common abrasive code4.1 Basic abrasive code The basic abrasive code should comply with the provisions of Table 1. Table 1 Basic abrasive code Basic abrasive category code Natural natural corundum Garnet NC Man-made Corundum series Carbide series Brown corundum A White Corundum WA Single crystal corundum SA Microcrystalline corundum MA Chrome corundum PA Zirconium corundum ZA Black corundum BA Semi-brittle corundum SFA Sintered corundum AS Ceramic corundum CA Black Silicon Carbide C Green Silicon Carbide GC Cubic Silicon Carbide SC Boron Carbide BC ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 2476-2025_English be delivered?Answer: Upon your order, we will start to translate GB/T 2476-2025_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 2476-2025_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 2476-2025_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 2476-2025?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 2476-2025 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
