GB/T 24737.5-2009 English PDFUS$139.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 24737.5-2009: Guide for technological management -- Part 5: Design of process procedure Status: Valid
Basic dataStandard ID: GB/T 24737.5-2009 (GB/T24737.5-2009)Description (Translated English): Guide for technological management -- Part 5: Design of process procedure Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: J30 Classification of International Standard: 25.020 Word Count Estimation: 6,657 Date of Issue: 2009-11-30 Date of Implementation: 2010-09-01 Quoted Standard: GB/T 24735; GB/T 24737.7; JB/T 9165.2 Regulation (derived from): National Standard Approval Announcement 2009 No.14 (Total No.154) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the type of process procedures, basic requirements of the design process specification, , documented evidence and procedure. This section applies to the mechanical design process specification products. GB/T 24737.5-2009: Guide for technological management -- Part 5: Design of process procedure---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Guide for technological management.Part 5. Design of process procedure ICS 25.020 J30 National Standards of People's Republic of China Technological management Part 5. Process Planning Posted 2009-11-30 2010-09-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordGB/T 24737 "technological management" is divided into nine sections. --- Part 1. General; --- Part 2. Product craft work program; --- Part 3. Product Structure Process review; --- Part 4. Process design; --- Part 5. Process Planning; --- Part 6. process optimization and technology assessment; --- Part 7. Process Quota; --- Part 8. Process Validation; --- Part 9. production site process management. This section GB/T Part of 524,737. This part of the National Technical product documentation Standardization Technical Committee (SAC/TC146) and focal points. This section is drafted. the machine Productivity Promotion Center, Chongqing Dajiang Xinda Vehicles Co., Ltd., advanced technology and equipment Forming States Key laboratories. The main drafters of this section. Xidao Yun, Ding Hongyu, Jiang Shiqing, ZHANG Xiu-fen, single Zhongde, Zhang sports, Hanlin Lin, Xiao Chengxiang. Technological management Part 5. Process Planning1 ScopeThis section GB/T 24737 specifies the type of process specification, file format, the basic requirements of the design process specification, and in accordance with procedures. This section applies to the mechanical product design process specification.2 Normative referencesThe following documents contain provisions which, through reference GB/T 24737 in this section constitute provisions of this section. For dated reference documents Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this section. GB/T 24735 Machinery Manufacturing Technology File Numbering Methods Part of GB/T 24737.7 technological management 7. Process Quota JB/T 9165.2 procedure specification format Type 3 process specification 3.1 special technical rules For a certain product or component designed process of order. 3.2 General technical rules 3.2.1 Typical process planning General Process procedures for a set of structural characteristics and process feature similar components designed. 3.2.2 group process planning Press group technology principles of the parts are classified into groups, each group of common technical rules for parts of the design. 3.3 standard process planning Technical rules have been incorporated into the standard.4 file format and process specification range4.1 process card. Describe the types of components during processing (or process) the transfer order, mainly for single, small batch production of products. 4.2 Technological card. a description of the transfer order types (or processes) in the step of, for a variety of mass-produced products. 4.3 Step Card. mainly used for high-volume products and one-piece, small batch of key processes. 4.4 Work Instructions. To ensure the quality of a production process, the detailed provisions of the operator should be made of the activities. For operating Content and requirements essentially the same process (or stations). 4.5 Process Code. a profession should abide by the general operating requirements. 4.6 Inspection card. Important step for critical examination. 4.7 Adjustment card. for automatic, semi-automatic, spiral bevel gear machine tools, automatic production lines and processing. Figure 4.8 blank. blank for the manufacture of casting, forging and so on. Assembly Systems Figure 4.9. for the assembly of complex products, and assembly process with the use of the card. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 24737.5-2009_English be delivered?Answer: Upon your order, we will start to translate GB/T 24737.5-2009_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 24737.5-2009_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 24737.5-2009_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
