GB/T 24737.6-2012 English PDF

US$509.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 24737.6-2012: Guide for technological management -- Part 6: Process optimization and review
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 24737.6-2012	509	Add to Cart	4 days	Guide for technological management -- Part 6: Process optimization and review	Valid

Similar standards

GB/T 25747   GB/T 40803   GB/T 40799   GB/T 24737.4   GB/T 24737.9   GB/T 24737.2   

Basic data

Standard ID: GB/T 24737.6-2012 (GB/T24737.6-2012)
Description (Translated English): Guide for technological management -- Part 6: Process optimization and review
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: J30
Classification of International Standard: 25.020
Word Count Estimation: 22,29
Quoted Standard: GB/T 4863-2008; GB/T 19000-2008
Regulation (derived from): National Standards Bulletin No. 9 of 2012
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the product process optimization and evaluation of basic tasks, basic principles, framework and main content. This section applies to mechanical product development, production process optimization and evaluation process.

GB/T 24737.6-2012: Guide for technological management -- Part 6: Process optimization and review

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Guide for technological management Part 6. Process optimization and review ICS 25.020 J30 National Standards of People's Republic of China Technological management Part 6. Process Optimization and Process Review Issued on. 2012-05-11 2012-12-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Table of Contents

Preface Ⅰ 1 Scope 1 2 Normative references 1 3 Terms and definitions 4 General 2 5 Process optimization and assessment framework 3 Optimization Scheme 3 6 The main contents of the review process 7 3 8 review procedures and requirements 5 Appendix A (informative) Process optimization and assessment framework 6 Technology Review contents Annex B (informative) process and overall program requirements 7 Annex C (informative) of critical components, important pieces, process review content key processes and process documentation requirements 9 Annex D (informative) new processes, technology evaluation and application of new technology content requirements 11 Annex E (informative) Process Review Report Format 12

Foreword

GB/T 24737 "technological management" is divided into nine sections. --- Part 1. General; --- Part 2. Product craft work program; --- Part 3. Product Structure Process review; --- Part 4. Process design; --- Part 5. Process Planning; --- Part 6. process optimization and technology assessment; --- Part 7. Process Quota; --- Part 8. Process Validation; --- Part 9. production site process management. This section GB/T Part of 624,737. This section drafted in accordance with GB/T 1.1-2009 given rules. This part of the National Technical product documentation Standardization Technical Committee (SAC/TC146) and focal points. This section is drafted. the machine Productivity Promotion Center, Beijing Benz Automotive Co., Ltd., Hefei Ruiqi Xin Information Technology Co., Ltd., Foshan Shunde City of Quality and Technology Supervision of standards and codes, Jinan Heavy Industries Co., Ltd., Advanced Forming Technology State Key Laboratory equipment, China Electronics Technology Group Corporation 28th Research Institute, Beijing Second Machine Tool Plant Co., Ltd. The main drafters of this section. Xi Daoyun, Analytical Instrumentation, Lin Guizhi, Guo, Shen Guang Zhang, Ouyang Dan SCENCE ZHANG Xiu-fen, Yangjia Fang, Eyup Lian, Single Zhongde, Sun Ning, Zhang Xiulan. Technological management Part 6. Process Optimization and Process Review

1 Scope

This section GB/T 24737 specifies the basic tasks of product and process optimization review, basic principles, framework and main content. This section applies to a mechanical product development, process optimization and production process of assessment.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 4863-2008 Machinery Manufacturing Technology Basic Terminology GB/T 19000-2008 Quality Management System Fundamentals and vocabulary

3 Terms and Definitions

GB/T 4863-2008 and defined the following terms and definitions apply to this document. 3.1 Process optimization (process optimization) processoptimization According to one (or several) criterion, and relevant parameters of the process to select the best solution. [GB/T 4863-2008, the definition 3.1.31] 3.2 Technology Review processreview To determine the process design activities to achieve suitability, adequacy and effectiveness of the stated objectives carried out. NOTE. rewrite GB/T 19000-2008, the definition of 3.8.7. 3.3 Key pieces keycomponents It has key features parts or products. Note. The key feature means that if a fault occurs, the possibility of personal accidents, loss of function of major products, seriously affecting the performance and characteristics of the product life. 3.4 Important pieces importantparts An important characteristic of parts or products. Note 1. The important feature means that if a failure occurs, it will affect the performance and characteristics of the product life. Note 2. The key pieces of important items and sometimes collectively referred to as the crucial element. 3.5 The key step keyprocess Product quality play a decisive role in the process. It is the main quality characteristics of the formation process, but also the production process requires strict control Step. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 24737.6-2012_English be delivered?

Answer: Upon your order, we will start to translate GB/T 24737.6-2012_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 24737.6-2012_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 24737.6-2012_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.