GB/T 24513.1-2009 English PDFUS$294.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 24513.1-2009: Corrosion of metals and alloys -- Classification of low corrosivity of indoor atmospheres -- Part 1: Determination and estimation of indoor corrosivity Status: Valid
Basic dataStandard ID: GB/T 24513.1-2009 (GB/T24513.1-2009)Description (Translated English): Corrosion of metals and alloys -- Classification of low corrosivity of indoor atmospheres -- Part 1: Determination and estimation of indoor corrosivity Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: H25 Classification of International Standard: 77.060 Word Count Estimation: 15,177 Date of Issue: 2009-10-30 Date of Implementation: 2010-05-01 Quoted Standard: GB/T 10123-2001; GB/T 19292.1-2003; ISO 11844-2; ISO 11844-3; IEC 60654-4-1987 Adopted Standard: ISO 11844-1-2006, IDT Regulation (derived from): National Standard Approval Announcement 2009 No.12 (Total No.152) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the classification of low corrosivity of indoor air. This section applies to the characterization of metals and alloys and metallic coatings in storage, transport, influential during the installation and operation of the indoor use of low- corrosive atmosphere. This section provides the corrosive effects of a standard sample using a specified metal during a fixed exposure being to determine the classification of indoor atmospheric corrosion. A detailed description of the important parameters suitable for indoor atmospheric corrosion evaluation basis of the tomb. GB/T 24513.1-2009: Corrosion of metals and alloys -- Classification of low corrosivity of indoor atmospheres -- Part 1: Determination and estimation of indoor corrosivity---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. . Corrosion of metals and alloys Classification of low corrosivity of indoor atmospheres Part 1. Determination and estimation of indoor corrosivity ICS 77.060 H25 National Standards of People's Republic of China GB/T 24513.1-2009/ISO 11844-1.2006 Corrosion of metals and alloys Classification of low corrosivity of indoor air Part 1. Measurement and evaluation of indoor atmospheric corrosion (ISO 11844-1.2006, IDT) Posted 2009-10-30 2010-05-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordGB/T 24513 "Atmospheric corrosion of metals and alloys Classification of low corrosivity" is divided into three parts. --- Part 1. Indoor atmospheric corrosion measurement and evaluation; --- Part 2. Determination of indoor atmospheric corrosion; --- Part 3. Determination of indoor environmental parameters of atmospheric corrosion. This is Part 1 GB/T 24513 of. This section is equivalent international standards ISO 11844-1.2006 "Atmospheric corrosion of metals and alloys Classification of low corrosivity Part 1. Indoor atmospheric corrosion measurement and evaluation "(in English). For ease of use, this section made the following editorial changes. "." --- With a decimal point instead of a comma as the decimal point, ""; --- Deleted international standard directory, foreword and introduction; --- Normative references by corresponding national standards were changed. This section of the Appendix A, Appendix B, Appendix C and Appendix D is an informative annex. This part is proposed by the China Iron and Steel Association. This part of the National Steel Standardization Technical Committee. This section drafted by. Institute of Metal Research, Materials Research Center, National Environmental corrosion field of scientific research stations network Standards, Metallurgical Industry Information Standards Institute. The main drafters of this section. Wang Zhenyao, Han Wei, Feng Chao, Ren Cuiying. GB/T 24513.1-2009/ISO 11844-1.2006 Corrosion of metals and alloys Classification of low corrosivity of indoor air Part 1. Measurement and evaluation of indoor atmospheric corrosion1 ScopeGB/T 24513 in this section is about the Classification of low corrosivity of indoor air. This section applies to the characterization of metals and alloys and metal coating layer in the storage, transportation, installation and operation of an impact during use low corrosion Of indoor air environment; specifies the corrosive effects during use of the specified metal standard samples at a fixed exposure is determined by the interior Atmospheric corrosion free; detailed description of the important parameters for evaluation of corrosion as the basis indoor atmosphere.2 Normative referencesThe following documents contain provisions which, through reference GB/T 24513 in this section constitute provisions of this section. For dated reference documents Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this section. GB/T 10123-2001 Corrosion of metals and alloys - Basic terms and definitions (eqvISO 8044.1999) GB/T 19292.1-2003 Corrosion of metals and alloys to atmospheric corrosion classification (ISO 9223.1992, IDT) Determination of Atmospheric Corrosion of metals and alloys ISO 11844-2 Classification of low corrosivity Part 2 indoor atmospheric corrosion ISO 11844-3 Atmospheric corrosion of metals and alloys Classification of low corrosivity Part 3 Effect of Atmospheric Corrosion Determination of environmental parameters IEC 60654-4. 1987 working conditions in industrial process measurement and control equipment Part 4. Corrosive and erosive impact3 Terms and DefinitionsThe following terms and definitions apply GB/T 24513 in this section. 3.1 Given the ability to atmospheric corrosion system caused by corrosion (for example, a given metal or alloy atmospheric corrosion) [GB/T 10123- in 2001]. 3.2 The combined effects of temperature and relative humidity of atmospheric corrosion [GB/T 19292.1-2003 definitions 3.5]. 3.3 Metal surface can lead to absorption of atmospheric corrosion or electrolyte film covers the period [GB/T 19292.1-2003 definitions 3.2]. 3.3.1 Wet by the time the temperature and relative humidity combined effect calculated [GB/T 19292.1-2003 defined 3.2.1]. 3.3.2 Wet time from various measurement systems displayed directly [GB/T 19292.1-2003 defined 3.2.2]. GB/T 24513.1-2009/ISO 11844-1.2006 ...... |
