GB/T 23333-2024 English PDFUS$479.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 23333-2024: Evaporative air cooler Status: Valid GB/T 23333: Historical versions
Basic dataStandard ID: GB/T 23333-2024 (GB/T23333-2024)Description (Translated English): Evaporative air cooler Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: Y61 Classification of International Standard: 23.120 Word Count Estimation: 23,242 Date of Issue: 2024-03-15 Date of Implementation: 2024-10-01 Older Standard (superseded by this standard): GB/T 23333-2009 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 23333-2024: Evaporative air cooler---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.ICS 23.120 CCSY61 National Standards of People's Republic of China Replace GB/T 23333-2009 Evaporative cooling fan Released on 2024-03-15 2024-10-01 Implementation State Administration for Market Regulation The National Standardization Administration issued Table of ContentsPreface I 1 Scope 1 2 Normative references 1 3 Terms and Definitions 1 4 Classification and model naming 2 5 Technical Requirements 3 6 Test methods 6 7 Inspection Rules 13 8 Labels and instructions for use, packaging, storage and transportation 15 Appendix A (Normative) Surrounding surface temperature rise test method 17 References 19ForewordThis document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents" Drafting. This document replaces GB/T 23333-2009 "Evaporative cooling fans". Compared with GB/T 23333-2009, except for structural adjustments and editing In addition to the changes in performance, the main technical changes are as follows. a) Added the provisions for product rated output air volume (Chapter 1); b) The definitions of “evaporative cooling fan”, “air output” and “evaporation capacity” have been changed (see 3.1, 3.2, 3.3 and 3.4 of the.2009 edition). 3.4); c) Added the definitions of "cooling filler", "water tank capacity" and "standby mode" (see 3.2, 3.6 and 3.7) and deleted the definitions of "humidification filter material (humidifier filter material)". "curtain)" term (see 3.2 of the.2009 edition); d) The rules for product classification and model naming have been changed (see 4.1, 4.2, 4.1, 4.2 of the.2009 edition); e) The requirements for conditions of use have been changed (see 5.1, 5.1 of the.2009 edition); f) Changed the technical requirements for appearance and assembly, anti-rust of electroplated parts, coating firmness, and water dripping from air outlets (see 5.2, 5.5, 5.6, 5.7, 5.2 of the.2009 edition); g) Added normative references GB/T 4706.115, GB/T 35758-2017, GB 21551.2 (see 5.3, 6.3, 6.18, 6.19 and Chapter 7), and deleted the normative references GB/T 191, GB 4706.48, GB/T 5296.2 (see.2009 edition 7.1, 7.3.2, 8.1, 8.2.1, 8.2.4); h) The description of technical requirements such as rated output air volume, rated evaporation capacity, water leakage resistance, reliability, etc. has been changed (see 5.8, 5.9, 5.12, 5.13, 5.5, 5.6, 5.9, 5.10 of the.2009 edition); i) Changed the technical requirements for energy efficiency ratio and noise (see 5.10, 5.11, 5.7, 5.8 of the.2009 edition) j) Added rated water tank capacity, low water level reminder, surrounding surface temperature rise, caster performance, standby power, antibacterial and anti-mildew technology Requirements (see 5.14, 5.15, 5.16, 5.17, 5.18, 5.19); k) Added test conditions, appearance and assembly, safety inspection, and electromagnetic compatibility test method requirements (see 6.1, 6.2, 6.3, 6.4); l) The test method descriptions for rust prevention of electroplated parts, coating firmness, air outlet dripping, water leakage resistance, and reliability have been changed (see 6.5, 6.6, 6.7, 6.12, 6.13, 6.5, 6.7, 6.8, 6.9, 6.10 of the.2009 edition); m) The test methods for rated output air volume, rated evaporation volume and noise have been changed (see 6.8, 6.9, 6.11, 6.1, 6.2, 6.3 and 6.4 of the.2009 edition). 6.4); n) Added test methods for rated water tank capacity, low water level warning, surrounding surface temperature rise, caster performance, standby power, antibacterial and anti-mildew Method (see 6.14, 6.15, 6.16, 6.17, 6.18); o) The rules for inspection classification, factory inspection and type inspection have been changed (see 7.1, 7.2, 7.3,.2009 edition 7.1, 7.2, 7.3); p) Changed the requirements for marking and packaging (see 8.1, 8.3, 8.1, 8.2 of the.2009 edition); q) Added the requirements for instructions for use (see 8.2); r) Added the surrounding surface temperature rise test method (see Appendix A). Please note that some of the contents of this document may involve patents, and the issuing organization of this document does not assume the responsibility for identifying patents. This document was proposed by China Light Industry Federation. This document is under the jurisdiction of the National Technical Committee for Standardization of Household Electrical Appliances (SAC/TC46). This document was drafted by. Zhuhai Gree Electric Appliances Co., Ltd., China Household Electrical Appliances Research Institute, Guangdong Midea Environmental Appliance Manufacturing Co., Ltd. Company, Qingdao Haier Smart Life Appliance Co., Ltd., China Institute of Home Furnishing (Beijing) Testing and Certification Co., Ltd., Guangdong Xinbao Electric Appliance Co., Ltd., Xi'an Qingan Refrigeration Equipment Co., Ltd. The main drafters of this document are. Zhang Hua, Li Liyan, Yang Tao, Lei Yuantong, Yan Ling, Hou Jianfei, Zhang Limin, Yang Bin and Sun Min. The previous versions of this document and the documents it replaces are as follows. ---First published in.2009 as GB/T 23333-2009; ---This is the first revision. Evaporative cooling fan1 ScopeThis document specifies the terms and definitions, classification and model naming, Requirements, test methods, inspection rules, marking, packaging, transportation and storage. This document applies to household and similar appliances with a rated voltage not exceeding 250V for single-phase appliances and 480V for other appliances. Evaporative cooling fan. This document does not apply to. ---Cooling fans designed for industrial use; --- Intended for use in special environments where corrosive or explosive gases (such as dust, steam or gas) are often produced. fan; --- Cooling fans with rated output air volume exceeding 1500m3/h.2 Normative referencesThe contents of the following documents constitute the essential clauses of this document through normative references in this document. For referenced documents without a date, only the version corresponding to that date applies to this standard; for referenced documents without a date, the latest version (including all amendments) applies to This document. GB/T 1019 General rules for packaging of household and similar electrical appliances GB/T 1236 Standardized air duct performance test for industrial ventilators GB/T 2423.3 Environmental testing Part 2.Test method Test Cab. Steady state damp heat test GB/T 2423.17 Environmental testing for electric and electronic products Part 2.Test methods Test Ka. Salt spray GB/T 2828.1 Sampling procedures for inspection by attributes Part 1.Sampling plans for batch inspection based on the acceptance quality limit (AQL) GB/T 2829 Periodic inspection sampling procedures and tables (applicable to the inspection of process stability) GB/T 4214.1 General requirements for noise test methods for household and similar electrical appliances GB 4343.1 Electromagnetic compatibility requirements for household appliances, electric tools and similar appliances Part 1.Emission GB/T 4706.1 Safety of household and similar electrical appliances Part 1.General requirements GB/T 4706.23 Safety of household and similar electrical appliances Part 23.Particular requirements for room heaters GB/T 4706.27 Safety of household and similar electrical appliances Part 27.Particular requirements for fans GB/T 4706.45 Safety of household and similar electrical appliances Part 45.Particular requirements for air purifiers GB/T 4706.115 Safety of household and similar electrical appliances Part 115.Particular requirements for evaporative cooling fans GB/T 7725 Room air conditioner GB 17625.1 Electromagnetic compatibility limits Part 1.Harmonic current emission limits (equipment input current per phase ≤ 16A) GB 21551.2 Special requirements for antibacterial materials with antibacterial, sterilization and purification functions for household and similar electrical appliances GB/T 35758-2017 Measurement method for standby power of household appliances3 Terms and definitionsThe following terms and definitions apply to this document. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 23333-2024_English be delivered?Answer: Upon your order, we will start to translate GB/T 23333-2024_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 23333-2024_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 23333-2024_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 23333-2024?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 23333-2024 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
