Path: Home > GB/T > Page659 > GB/T 22232-2008

Price & Delivery

US$214.00 · In stock · Download in 9 seconds
GB/T 22232-2008: Test method for the thermal stability of chemicals by differential scanning calorimetry
Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure
Status: Valid

Std ID	Version	USD	Buy	Deliver [PDF] in	Title (Description)
GB/T 22232-2008	English	214	Add to Cart	3 days [Need to translate]	Test method for the thermal stability of chemicals by differential scanning calorimetry

GB/T 22232-2008: Test method for the thermal stability of chemicals by differential scanning calorimetry

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Test method for the thermal stability of chemicals by differential scanning calorimetry ICS 13.300 A80 National Standards of People's Republic of China Determination of the thermal stability of chemical substances Differential scanning calorimetry Posted 2008-06-19 2009-02-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

This standard is equivalent to using ASTME537-2002 "Standard Test Method for Thermal Stability chemicals differential scanning calorimetry Determination" (In English). This standard is managed by the National Standardization Technical Committee chemicals dangerous (SAC/TC251) and focal points. Participated in the drafting of this standard. the Chemical Institute of Standardization, Jiangxi Entry-Exit Inspection and Quarantine of Guangdong. Drafters of this standard. Liaoyan Yan, Wang Xiaobing, Huang Lili, Mei Jian, Boyan Gang, Zhou Wei, Chen Gufeng, Xi Zhang Jun, Chen Qiang. This standard is the first release. ASTM Foreword ASTME-27 Committee is currently engaged in the development of potentially dangerous chemicals measured approach to this potential is usually estimated by Use CHETAH7.0 program to calculate the maximum energy of chemicals or mixtures of chemicals derived reaction. Note. The complete assessment of the potential hazards of chemical substances must be tested methods or CHETAH this project did not consider some practical considerations into account. The committee adopted the "potential danger" refers to materials under different environmental conditions the degree of sensitivity or ignition energy release. The primary purpose of this test method is to detect chemicals enthalpy (enthalpy) changes in the estimated ignition temperature and enthalpy (heat). Differential scanning calorimetry Advantages of using a small amount of sample, a few milligrams of sample can be detected. Determination of the thermal stability of chemical substances Differential scanning calorimetry

1 Scope

This standard applies to the determination of a sample with a minimum amount of material change in enthalpy, enthalpy change estimate occurs at a temperature, and by differential scanning The amount of heat or pressure differential scanning calorimetry method to determine their enthalpy (heat). This test method can be solid, liquid or slurry samples were measured. This test method may be inert at an absolute pressure range of 100Pa ~ 7MPa, the temperature range of 300K ~ 800K (27 ℃ ~ 527 ℃) or Reactive gas is carried out. This standard uses SI units. There is no equivalent to the ISO standard this detection method. This standard relates to other hazardous materials, operations and equipment. This standard does not claim to solve all the associated security issues. The establishment of appropriate Safety and health practices and determine the applicability of regulatory limitations prior to use of this standard is the user's responsibility. Specific safety precautions See Chapter 8.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. Standard Terminology Relating to GB/T 22233 potentially dangerous chemicals ASTME473 terms related to thermal analysis Room ASTME691 test method to determine the accuracy of laboratory research guide ASTME967 differential scanning calorimetry and differential thermal analysis Temperature Calibration Guide ASTME968 differential scanning calorimetry hot stream alignment guide Test methods ASTME1860 thermal analyzer calibration elapsed time NOTE. ASTM standard Yearbook, Vol 14.02.

3 Terms and Definitions

ASTME473, GB/T 22233 and established the following terms and definitions apply to this standard. 3.1 Differential recording format (see Figures 1 and 2 and the scanning calorimeter kind of heat flux for the vertical axis, temperature or time abscissa The ASTME473 term). 3.2 Part of a single process generates heat curve. Common and established baseline deviation, maximum deviation and reconstruction baseline to describe, heavy Built baseline are not necessarily the same as before and peak (see Figure 1). Note. The temperature scanning may be the case, as shown in FIG. 2 immediately after an endothermic or exothermic connections. These competing reactions Type, it is difficult and sometimes impossible to locate the real peak and starting temperature. ...