GB/T 19315-2025 English PDFUS$204.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 19315-2025: Small craft - Maximum load capacity Status: Valid GB/T 19315: Historical versions
Basic dataStandard ID: GB/T 19315-2025 (GB/T19315-2025)Description (Translated English): Small craft - Maximum load capacity Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: U37 Classification of International Standard: 47.080 Word Count Estimation: 10,144 Date of Issue: 2025-06-30 Date of Implementation: 2026-01-01 Older Standard (superseded by this standard): GB/T 19315-2003 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 19315-2025: Small craft - Maximum load capacity---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT19315-2025ICS 47.080 CCSU37 National Standard of the People's Republic of China Replaces GB/T 19315-2003 Maximum loading capacity of the boat Released on June 30, 2025 Implementation on January 1, 2026 State Administration for Market Regulation The National Standardization Administration issued PrefaceThis document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents" Drafting. This document replaces GB/T 19315-2003 "Maximum loading capacity of small craft". Compared with GB/T 19315-2003, except for the structural adjustment and In addition to editorial changes, the main technical changes are as follows. --- Deleted the terms and definitions of seating area, added several terms and definitions such as passenger occupied area, boat, small boat, etc. (see Section 3 chapter); --- Changed the content of each sub-item weight in "maximum load" (see Chapter 5, Chapter 5 of the.2003 edition); --- Added the content of "maximum loading recommended by the manufacturer" (see Chapter 6); --- Added the content of "maximum load on the construction nameplate" (see Chapter 7); --- Changed the references in the "Owner's Manual" (see 8.2, 6.2 of the.2003 edition). This document is equivalent to ISO 14946.2021 "Maximum loading capacity of small craft". Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents. This document is proposed and coordinated by the National Technical Committee for Standardization of Small Boats (SAC/TC241). This document was drafted by. The 708th Research Institute of China Shipbuilding Industry Corporation. The main drafters of this document are Hu Shihong, Ren Yizhou, Xia Jun, He Lin, and Yu Jiani. The previous versions of this document and the documents it replaces are as follows. ---First published in.2003 as GB/T 19315-2003. ---This is the first revision. Maximum loading capacity of the boat1 ScopeThis document specifies the maximum loading capacity of a small boat that does not exceed the limits of stability, freeboard, buoyancy, etc. in other ISO standards. The project further specifies the requirements for passenger seating and occupied area. This document does not apply to personal watercraft covered by ISO 13590.2 Normative referencesThis document has no normative references.3 Terms and DefinitionsThe following terms and definitions apply to this document. ISO and IEC terminology databases used for standardization are available at the following addresses. 3.1 Empty weight lightcraftmass mLCC The weight of the boat (3.4) in its unladen state. NOTE. See ISO 8666. 3.2 seat The minimum horizontal dimension is 400mm in width and the minimum vertical dimension is 750mm in length (i.e. the vertical depth of the seat plus the clear distance for the feet in front of the seat). Any horizontal or nearly horizontal surface on which a person can sit. Note. See Figure 1. Figure 1 Seat dimensions ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 19315-2025_English be delivered?Answer: Upon your order, we will start to translate GB/T 19315-2025_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 19315-2025_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 19315-2025_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 19315-2025?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 19315-2025 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
