GB/T 18029.24-2012 English PDF
Basic dataStandard ID: GB/T 18029.24-2012 (GB/T18029.24-2012)Description (Translated English): Wheelchairs -- Part 24: Requirements and test methods for user-operated stair climbing devices Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: C45 Classification of International Standard: 11.180.10 Word Count Estimation: 72,770 Quoted Standard: GB/T 18029.2-2009; GB/T 18029.6-2009; GB/T 18029.7-2009; GB/T 18029.8-2008; GB/T 18029-2000; ISO 3880-1; ISO 7176-1; ISO 7176-3; ISO 7176-4; ISO 7176-5; ISO 7176-9; ISO 7176-11; ISO 7176-13; ISO 7176-14-1997; ISO 7176-15; ISO 7176-21-2003; ISO 7176-22 Adopted Standard: ISO 7176-24-2004, IDT Regulation (derived from): National Standards Bulletin No. 42 of 2012 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard applies to manipulate the seat occupant's own style stair climbing device and delivery of stair climbing wheelchair device, the direction of the occupant facing backwards down the stairs to climb stairs and climb down the stairs facing down GB/T 18029.24-2012: Wheelchairs -- Part 24: Requirements and test methods for user-operated stair climbing devices---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Wheelchairs Part 24. Requirements and test methods for user-operated stair climbing devices ICS 11.180.10 C45 National Standards of People's Republic of China Wheelchairs - Part 24. Take manipulated Requirements and test methods for stair climbing device Wheelchairs-Part 24. Requirementsandtestmethodsfor (ISO 7176-24.2004, IDT) Issued on. 2012-12-31 2013-05-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released Table of ContentsPreface Ⅰ 1 Scope 1 2 Normative references 1 3 Terms and definitions 2 4 Performance Requirements 5 5 test facility 8 116 stairs ready device 7 14 test conditions 8 skew angle 14 9 braking performance 15 10 17 Static Stability 11 19 Dynamic Stability Security stepped transition 12 of 22 13 static strength, impact strength and fatigue strength 24 14 Climate Security 28 15 Electromagnetic compatibility (EMC) 29 16 safety devices 30 Inspection Report 32 17 18 identification and documentation 33 Appendix A (normative) stairs typical representation of the type of device 35 Annex B (informative) Recommended safety device 38 Annex C (normative) Replacement wheelchair 39 Annex D (normative) to determine the maximum recommended speed of 40 Annex E (informative) stability testing status and location 41 stair climbing device Annex F (normative) escalator testing machine 56 (Normative) Determination of the external dimensions and the operating range of the Appendix G 57 Determination of Appendix H (normative) theory of energy 63 The difference between Annex I (normative) small train wheels and larger wheel train 65ForewordGB/T 18029 "wheelchair" consists of the following components. --- Part 1. Determination of static stability; --- Part 2. Determination of dynamic stability of electric wheelchairs; --- Part 3. Determination of the brake; --- Part 4. Determination of electric wheelchairs and electric scooters theory energy consumption; --- Part 5. Dimensions, mass and turning space, measured; Electric wheelchairs maximum speed, acceleration and deceleration measured;. --- Part 6 --- Part 7. Measurement of seating and wheel sizes; --- Part 8. static strength, impact strength and fatigue strength requirements and test methods; --- Part 9. climatic test methods of electric wheelchairs; --- Part 10. Determination of electric wheelchair obstacle capacity; --- Part 11. Test dummies; --- Part 13. Determination of the test surface coefficient of friction; --- Part 14. electric wheelchairs and power control system requirements and test methods; --- Part 15. release of information, documents and requirements issued identification; --- Part 16. Block (by) pad flame retardancy requirements and test methods; --- Part 19. Wheeled mobile device for a motor vehicle; --- Part 21. Electromagnetic compatibility requirements and test methods; --- Part 22. Adjustment Program; --- Part 23. Requirements and test methods for stair climbing device caregiver operations; --- Part 24. Requirements and test methods occupant operated stair climbing apparatus; --- Part 26. Glossary. This section GB/T 18029 of Part 24. This section drafted in accordance with GB/T 1.1-2009 given rules. This section uses the translation method identical with ISO 7176-24.2004 "Wheelchairs - Part 24. Take the stairs means of manipulated Requirements and test methods. " Consistency correspondence between this part of international documents and normative references of our files are as follows. --- GB/T 18029.2-2009 Wheelchairs - Part 2. Determination of dynamic stability of electric wheelchairs (ISO 7176-2. 2001, IDT) --- GB/T 18029.6-2009 Wheelchairs - Part 6. Determination of electric wheelchairs maximum speed, acceleration and deceleration (ISO 7176-6.2001, IDT) --- GB/T 18029.7-2009 Wheelchairs - Part 7. Measurement of seating and wheel sizes methods (ISO 7176-7.1998, IDT) --- GB/T 18029.8-2008 Wheelchairs - Part 8. static strength, impact strength and fatigue strength requirements and test side Method (ISO 7176-8.1998, IDT) --- GB/T 18029-2000 Wheelchairs - Part 16. Block (by) pad flame retardancy requirements and test methods (ISO 7176-16. 1997, IDT) Please note that some of the content of this document may involve patents. Release mechanism of the present document does not assume responsibility for the identification of these patents. This section proposed by the People's Republic of China Ministry of Civil Affairs. This part of the National Rehabilitation and special equipment Standardization Technical Committee on Persons with Disabilities (SAC/TC148) centralized. This section is responsible for drafting. National Rehabilitation Device Quality Supervision and Inspection Center, Shanghai Hubang Medical Devices Co., Ltd., Foshan City, Oriental Medical Equipment Co., Ltd., China Rehabilitation Research Center, Shanxi O Reiter Health Industry Co., Ltd. The main drafters of this section. Zhang Hongtao, Yi-Ming Zhao, Zhao Rong key, Zhang Jian, in Juan-Juan, Li Jinfeng, Wang Baohua, Gu Yaling, Ding Botan, Zhao Shun times, Qin for years, HE Chuan. Wheelchairs - Part 24. Take manipulated Requirements and test methods for stair climbing device1 ScopeGB/T 18029 in this section applies to the occupant of the seat itself operated device type stairs and stair climbing wheelchair carrier means Occupant facing backwards up the stairs and down direction facing down direction and down the stairs. This section GB/T 18029 specifies the requirements and test methods occupant itself operated electric stair climbing device. Including ring Habitat transformation, marking and release requirements. This section GB/T 18029 specifies the reliability of the test and demonstrate the stairs means to prove or larger at 35 ° angle steps Security. Note. Requires caregiver driven stair climbing device relates to GB/T 18029.23.2 Normative referencesThe following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 18029.2-2009 Wheelchairs - Part 2. Determination of dynamic stability of electric wheelchairs (ISO 7176-2.2001, IDT) GB/T 18029.6-2009 Wheelchairs - Part 6. Determination of electric wheelchairs maximum speed, acceleration and deceleration (ISO 7176-6.2001, IDT) GB/T 18029.7-2009 Wheelchairs - Part 7. Measurement of seating and wheel sizes methods (ISO 7176-7.1998, IDT) GB/T 18029.8-2008 Wheelchairs - Part 8. static strength, impact strength and fatigue strength requirements and test methods (ISO 7176-8.1998, IDT) GB/T 18029-2000 wheelchair seat (by) pad flame retardancy requirements and test methods (ISO 7176-16.1997, IDT) ISO 3880-1 Building construction stairs vocabulary (BuildingConstruction-Stairs-Vocabulary) ISO 7176-1 Wheelchairs - Part 1. Determination of static stability (Wheelchairs-Part 1. Determinationofstatic stability) ISO 7176-3 Wheelchairs - Part 3. Determination of the brake (Wheelchairs-Part 3. Determinationofeffective- nessofbrakes) ISO 7176-4 Wheelchairs - Part 4. Determination of electric wheelchairs and electric scooters theoretical energy (Wheelchairs-Part 4. Energyconsumptionofelectricwheelchairsandscootersfordeterminationoftheoreticaldistance range) ISO 7176-5 Wheelchairs - Part 5. Dimensions, mass and turning space measurement (Wheelchairs-Part 5. Deter- minationofoveraldimensions, massandturningspace) Climatic test methods of electric wheelchairs (Wheelchairs-Part 9.. ISO 7176-9 Wheelchairs - Part 9 Climatictests forelectricwheelchairs) ISO 7176-11 Wheelchairs - Part 11. Test dummies (Wheelchairs-Part 11. Testdummies) ISO 7176-13 Wheelchairs - Part 13. Determination of the test surface coefficient of friction (Wheelchairs-Part 13. Determination ofcoefficientoffrictionoftestsurfaces) ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 18029.24-2012_English be delivered?Answer: Upon your order, we will start to translate GB/T 18029.24-2012_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 18029.24-2012_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 18029.24-2012_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
