GB/T 17799.7-2022 English PDFUS$509.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 17799.7-2022: Electromagnetic compatibility - Generic standards - Part 7: Immunity requirements for equipment intended to perform functions in a safety-related system (functional safety) in industrial locations Status: Valid
Basic dataStandard ID: GB/T 17799.7-2022 (GB/T17799.7-2022)Description (Translated English): Electromagnetic compatibility - Generic standards - Part 7: Immunity requirements for equipment intended to perform functions in a safety-related system (functional safety) in industrial locations Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: L06 Classification of International Standard: 33.100.20 Word Count Estimation: 26,268 Date of Issue: 2022-12-30 Date of Implementation: 2023-07-01 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 17799.7-2022: Electromagnetic compatibility - Generic standards - Part 7: Immunity requirements for equipment intended to perform functions in a safety-related system (functional safety) in industrial locations---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. ICS 33.100.20 CCSL06 National Standards of People's Republic of China General Standard for Electromagnetic Compatibility Part 7.Industry Used in places to perform safety-related system functions (functional Safety) Immunity requirements for equipment Released on 2022-12-30 and implemented on 2023-07-01 State Administration for Market Regulation Released by the National Standardization Management Committee table of contentsPreface III Introduction IV 1 Scope 1 2 Normative references 1 3 Terms, Definitions and Abbreviations 3 3.1 Terms and Definitions 3 3.2 Abbreviations 6 4 Overview 6 4.1 Consistency with IEC Guide107 6 4.2 Consistency with GB /Z 17624.2-2013 7 4.3 Availability policy for functions intended for safety applications 7 5 Performance criteria 7 5.1 Performance criteria for functional safety applications 7 5.2 Application of performance criterion DS 8 6 Test plan 8 6.1 General 8 6.2 Configuration of the EUT during the test8 6.2.1 General 8 6.2.2 EUT Composition 9 6.2.3 EUT Assembly 9 6.2.4 I/O port 9 6.2.5 Auxiliary equipment 9 6.2.6 Cable laying and grounding 9 6.3 Operating conditions of the EUT during the test9 6.3.1 Mode 9 6.3.2 Environmental conditions 9 6.3.3 EUT application software during the test9 6.4 Specification of functional performance 9 6.5 Test description 9 6.6 Conduct of the test 10 6.6.1 Overview 10 6.6.2 Aspects to consider when applying DS10 7 Immunity requirements 10 8 Test arrangement and test principle 18 8.1 Test arrangement 18 8.2 Principle of the test 18 8.3 Test configuration 19 8.4 Monitoring 19 9 Test results and test report 19 Appendix A (informative) Policies for functions intended for safety applications 20 Reference 21forewordThis document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1.Structure and Drafting Rules for Standardization Documents" drafting. This document is Part 7 of the General Standard for Electromagnetic Compatibility. The General Standard for Electromagnetic Compatibility has published the following parts. --- Immunity in residential, commercial and light industrial environments (GB/T 17799.1); --- Immunity test in industrial environment (GB/T 17799.2); --- Emissions in residential, commercial and light industrial environments (GB 17799.3); --- Emission in industrial environment (GB 17799.4); --- High altitude electromagnetic pulse (HEMP) immunity of indoor equipment (GB/T 17799.5); --- Immunity in the environment of power plants and substations (GB /Z 17799.6); --- Part 7.Immunity requirements for equipment used to perform safety-related system functions (functional safety) in industrial locations (GB/T 17799.7). This document is modified to adopt IEC 61000-6-7.2014 "Electromagnetic Compatibility (EMC) Part 6-7.General Standards Used in Industrial Sites Immunity Requirements for Equipment Performing Safety-Related System Functions (Functional Safety). The technical differences between this document and IEC 61000-6-7.2014 and their reasons are as follows. ---Deleted the parameter indicators related to 60Hz in Table 2 to Table 6, including 60Hz and 60Hz in the test levels of Table 2, Table 4 to Table 6 180Hz frequency point, and the requirements of the duration of 12 cycles, 30 cycles and 300 cycles in the test level of Table 3, to apply In my country's national conditions (see Chapter 7); --- In Table 7 and Table 8, the frequency range and services related to mobile communications in my country have been added for ease of use (see Chapter 7). The following editorial changes have been made to this document. --- In order to be consistent with our country's standard system, the name of the standard is changed to "General Standard for Electromagnetic Compatibility Part 7.Used in Industrial Sites Immunity requirements for equipment performing safety-related system functions (functional safety); --- Deleted the note about the French version only in the definition of the term "controlled equipment" (see 3.1.7); --- Added the abbreviations "ESD" and "UPS" (see 3.2); --- Added "for reference only" in the header of Table 8 to be consistent with Table 7 (see Chapter 7); --- Adjusted references. Please note that some contents of this document may refer to patents. The issuing agency of this document assumes no responsibility for identifying patents. This document is proposed and managed by the National Electromagnetic Compatibility Standardization Technical Committee (SAC/TC246). This document is drafted by. China Electric Power Research Institute Co., Ltd., the Fifth Electronic Research Institute of the Ministry of Industry and Information Technology, China Electronics Technology Standardization Research Institute, Chongqing Information and Communication Research Institute, China Household Electrical Appliances Research Institute, Shanghai Electrical Apparatus Research Institute (Group) Co., Ltd., Guangdong Product Quality Supervision and Inspection Research Institute, Nantong Power Transmission and Transformation Engineering Co., Ltd., China Energy Construction Group Hunan Electric Power Design Institute Co., Ltd. The main drafters of this document. Zhang Jiangong, Li Ni, Wan Baoquan, Zhu Wenli, Chen Shigang, Liu Xingfa, Li Guoqing, Gan Zheyuan, Li Yan, Wang Yanzhao, Zhao Jun, He Wei, Zhang Yemao, Wu Yongkang, Xing Lin, Shi Guangming, Gu Jianjun, Zeng Xiangyao.IntroductionElectromagnetic compatibility is the ability of electrical and electronic equipment or systems to function properly in their electromagnetic environment without causing adverse effects to anything in that environment. Ability to withstand electromagnetic disturbances. Electromagnetic compatibility is one of the important factors affecting the environment and product quality, and its standardization work has aroused widespread attention at home and abroad. In this regard, the IEC 61000 series of publications developed by the International Electrotechnical Commission (IEC) Common standards in the fields of industry, electrical engineering and energy, transportation, social undertakings and health, quality and safety of consumer goods, etc., divided into There are six categories. overview, environment, limit values, testing and measurement techniques, installation and mitigation guidelines, and general standards. my country has launched a series of publications The domestic transformation work has been carried out, and the corresponding national standard system has been established. In this standard system, the "General Standard for Electromagnetic Compatibility" is a basic standard for general aspects in the field of electromagnetic compatibility, which aims to describe different Emission and immunity requirements in the same environment, etc., are proposed to be composed of 8 parts. --- Immunity in residential, commercial and light industrial environments (GB/T 17799.1). Intended for residential, commercial and light industrial environments Electrical and electronic equipment used in specifies its immunity to continuous and transient, conducted and radiated disturbances, including electrostatic discharge degree test requirements. --- Immunity test in industrial environment (GB/T 17799.2). Intended for use in an industrial environment and does not yet have a dedicated product The product or product-group immunity standard for electrical and electronic equipment specifies its immunity to continuous and transient, conducted and Immunity test requirements for radiated disturbances. --- Emissions in residential, commercial and light industrial environments (GB 17799.3). Intended for use in residential, commercial and light industrial environments Emission test requirements for continuous and transient, conducted and radiated disturbances of electrical and electronic equipment used. --- Emission in an industrial environment (GB 17799.4). The purpose is to specify the continuity of electrical and electronic equipment used in industrial environments and emission test requirements for transient, conducted and radiated disturbances. ---Indoor equipment high-altitude electromagnetic pulse (HEMP) immunity (GB/T 17799.5). The purpose is to regulate the electrical and HEMP immunity requirements for electronic equipment. --- Immunity in the environment of power plants and substations (GB /Z 17799.6). The purpose is to regulate the generation, transmission and distribution of power systems Immunity requirements for the equipment used and associated communication systems. --- Part 7.Immunity requirements for equipment used to perform safety-related system functions (functional safety) in industrial locations (GB/T 17799.7). The purpose is to determine the immunity test requirements related to continuous and transient, conducted and radiated disturbances of equipment including electrostatic discharge. --- Part 8.Launch of special equipment in commercial and light industrial places (GB/T 17799.8). intended to provide for commercial and light Emission test requirements for specialized equipment used in industrial locations. This document focuses on the immunity test requirements related to continuous and transient, conducted and radiated disturbances of equipment including electrostatic discharge. Applicable to electrical and electronic equipment intended to be used in safety-related systems, for the supplier to declare that the equipment used in safety-related systems is resistant to It is used when the immunity of electromagnetic disturbance is used, and it is also used by designers, system integrators, installers and evaluators of safety-related systems when evaluating Used in declarations made by suppliers and to provide guidance to product committees. General Standard for Electromagnetic Compatibility Part 7.Industry Used in places to perform safety-related system functions (functional Safety) Immunity requirements for equipment1 ScopeThis document is used by suppliers when declaring the electromagnetic immunity of equipment used in safety-related systems. Designers, system integrators, installers and evaluators of safety-related systems should also use this document to evaluate suppliers as issued a statement. This document provides guidance for product committees. This document applies to electrical and electronic equipment intended for use in safety-related systems, namely. ● meet the requirements of IEC 61508 and/or other domain-specific functional safety standards, and ● Operation in industrial locations as described in 3.1.15. Note 1.The final safety-related system is designed by a system integrator (or equivalent staff), who is responsible for assessing the suitability of the device for a particular application. Should See GB /Z 17624.2-2013 Appendix D for the process. The purpose of this document is to determine the immunity test requirements for equipment related to continuous and transient, conducted and radiated disturbances including electrostatic discharge. These requirements are only for functions intended for functional safety applications. For each port considered, test requirements are specified. Note 2.However, the immunity requirements of this document do not include extreme situations, which can occur in any place, but the probability of occurrence is extremely low. Therefore, safe It is the responsibility of the relevant system designer to check that the requirements of this document cover the electromagnetic phenomena in the intended application.2 Normative referencesThe contents of the following documents constitute the essential provisions of this document through normative references in the text. Among them, dated references For documents, only the version corresponding to the date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to this document. GB /Z 17624.2-2013 Overview of electromagnetic compatibility and electrical and electronic systems for equipment related to electromagnetic phenomena to achieve functional safety method (IEC /T S61000-1-2.2008, IDT) GB /Z 17624.6-2021 Electromagnetic Compatibility Overview Part 6.Guidelines for the Evaluation of Measurement Uncertainty (IEC /T R61000-1-6. 2012, IDT) Note. GB/T 2900 (all parts) Electrotechnical terms [IEC 60050 (all parts)] GB/T 4365-2003 Electrotechnical Terminology Electromagnetic Compatibility (IEC 60050-161.1990, IDT) IEC 61000-4-2 Electromagnetic compatibility (EMC) Part 4-2.Test and measurement techniques Electrostatic discharge immunity test [Electro- charge immunity test] Note. GB/T 17626.2-2018 Electromagnetic Compatibility Test and Measurement Technology Electrostatic Discharge Immunity Test (IEC 61000-4-2.2008, IDT) IEC 61000-4-3 Electromagnetic compatibility (EMC) Part 4-3.Test and measurement techniques Radio frequency electromagnetic field radiation immunity test Note. GB/T 17626.3-2016 Electromagnetic Compatibility Test and Measurement Technology Radio Frequency Electromagnetic Field Radiation Immunity Test (IEC 61000-4-3.2010, IDT) ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 17799.7-2022_English be delivered?Answer: Upon your order, we will start to translate GB/T 17799.7-2022_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 17799.7-2022_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 17799.7-2022_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
