GB/T 16895.25-2022 English PDFUS$264.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 16895.25-2022: Low voltage electrical installations - Part 7-711: Requirements for special installations or locations - Exhibitions, shows and stands Status: Valid GB/T 16895.25: Historical versions
Basic dataStandard ID: GB/T 16895.25-2022 (GB/T16895.25-2022)Description (Translated English): Low voltage electrical installations - Part 7-711: Requirements for special installations or locations - Exhibitions, shows and stands Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: P60;P63 Word Count Estimation: 14,179 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 16895.25-2022: Low voltage electrical installations - Part 7-711: Requirements for special installations or locations - Exhibitions, shows and stands---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Low voltage electrical installations - Part 7-711.Requirements for special installations or locations - Exhibitions, shows and stands ICS 29.020; 91.140.50 CCSP60;P63 National Standards of People's Republic of China Replacing GB/T 16895.25-2005 Low Voltage Electrical Installations Part 7-711. Requirements for special installations or locations Exhibitions, displays and exhibition areas (IEC 60364-7-711.2018, IDT) Published on 2022-07-11 2023-02-01 Implementation State Administration for Market Regulation Released by the National Standardization Administration directory Preface III Introduction V 711 Exhibitions, displays and exhibition areas 1 711.1 Scope 1 711.2 Normative references 1 711.3 Terms and Definitions 2 711.31 Purpose, Power, and Structure 3 711.313 Power 3 711.4 Safeguarding 3 711.41 Protection against electric shock 3 711.410 Introduction 3 711.411 Protective measures. automatic cut-off of power 3 711.414 Protective measures. Extra-low voltage 4 using SELV and PELV 711.415 Additional protection 4 711.42 Prevention of thermal effects 4 711.422 Precautions for special fire hazard locations 4 711.5 Selection and installation of electrical equipment 4 711.51 General rule 4 711.511 Conforms to Criterion 4 711.52 Cabling systems 5 711.521 Cabling System Type 5 711.526 Electrical connections 5 711.53 Isolation, switching and control 5 711.535 Coordination of various protective appliances 5 711.536 Isolation and switching 5 711.55 Other equipment 5 711.559 Lamps and lighting fixtures 6 Reference 7 forewordThis document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1.Structure and Drafting Rules of Standardization Documents" drafted. GB/T 16895 "Low-voltage electrical installations" has released 5 parts, of which Part 4, Part 5 and Part 7 are divided into several sub-sections part. --- Part 1.Basic principles, general characteristics evaluation and definitions; --- Part 4.Safety protection; --- Part 5.Selection and installation of electrical equipment; --- Part 6.Inspection; --- Part 7.Requirements for special installations or locations. This document is subpart 7-711 of GB/T 16895 "Low-voltage electrical installations". Part 7 of GB/T 16895 has issued the following subsections part. --- Low-voltage electrical installations Part 7-701.Requirements for special installations or places with bathtubs or showers; --- Low-voltage electrical installations Part 7-702.Requirements for special installations or locations Swimming pools and fountains; --- Building electrical installations Part 7-703.Requirements for special installations or locations for rooms and small rooms with sauna heaters; --- Low-voltage electrical installations Part 7-704.Requirements for special installations or sites Electrical installations for construction and demolition sites; --- Low-voltage electrical installations Part 7-705.Requirements for special installations or locations for agricultural and horticultural facilities; --- Low-voltage electrical installations Part 7-706.Conductive places with restricted activities required for special installations or places; --- Building electrical installations Part 7-710.Requirements for special installations or locations for medical locations; --- Low-voltage electrical installations Part 7-711.Requirements for special installations or places for exhibitions, displays and exhibition areas; --- Low-voltage electrical installations Part 7-712.Requirements for special installations or locations Solar photovoltaic (PV) power systems; --- Building electrical installations Part 7-713.Requirements for special installations or premises furniture; --- Low-voltage electrical installations Part 7-714.Requirements for special installations or locations Outdoor lighting installations; --- Building electrical installations Part 7-715.Requirements for special installations or locations Extra-low voltage lighting installations; --- Building Electrical Installations Part 7-717.Mobile or transportable units required for special installations or locations; --- Low-voltage electrical installations Part 7-722.Requirements for special installations or locations for electric vehicle power supply; --- Electrical installations in buildings - Part 7-740.Requirements for special installations or places - Structures, entertainment in playgrounds and circuses facilities and sheds; --- Low-voltage electrical installations Part 7-753.Requirements for special installations or locations Heating cables and buried heating systems. This document replaces GB/T 16895.25-2005 "Electrical installations in buildings - Part 7-711.Requirements for special installations or locations" Exhibition halls, showrooms and booths", compared with GB/T 16895.25-2005, except for structural adjustment and editorial changes, the main technical changes as follows. --- Changed the terms "display", "exhibition area", "temporary building", "temporary electrical installation power receiving point" and definitions (see 711.3.2, 711.3.3, 711.3.4, 711.3.6, 711.2.2, 711.2.3, 711.2.4, 711.2.6 of the.2005 edition), the terms "exhibition", "temporary electrical "Pneumatic installation" definition (see 711.3.1, 711.3.5, 711.2.1, 711.2.5 of the.2005 edition); --- Changed the requirements for the nominal working voltage of temporary electrical installations (see 711.313, 711.313 of the.2005 edition), deleted the external Environmental category (see 711.32 of the.2005 edition); --- Added changes to the general requirements for preventing electric shock, changes to automatic power-off protection measures and extra-low voltage protection measures (see 711.410.3, 711.411.3.2.101, 711.414); --- Changed the requirements for TN system, auxiliary equipotential bonding (see 711.411.4, 711.415, 711.413.1.3 of.2005 edition, --- Deleted the note in "thermal effect protection" and the requirements of "insulated protective conductor" and "screening or outer shield" (see the.2005 edition of 711.42.01, 711.42.02); --- Added "heating" requirements (see 711.422.4.101); --- Delete the "isolation" requirements and "application of safety precautions" (see 711.462, 711.47 of the.2005 edition); --- Added the requirement of "conforming to standards" in "Selection and installation of electrical equipment" (see 711.51.101); --- Changed the requirements for "Wiring System", "Wiring System Type" and "Electrical Connection" (see 711.52.101, 711.521.101, --- Added "isolation, switching and control" requirements (see 711.53); --- Delete the provisions for motors, sockets and plugs, and low-voltage generator sets in "Other Equipment" (see 711.55.04 of the.2005 edition, 711.55.07, 711.551 and 711.56); --- Deleted "emergency power supply" and "inspection" (see 711.56, 711.6 of the.2005 edition). This document is equivalent to IEC 60364-7-711.2018 "Low-voltage electrical installations - Part 7-711.Requirements for special installations or locations Exhibitions, Displays and Exhibit Areas". The following editorial changes have been made to this document. --- Delete Appendix A of IEC 60364-7-711.2018, because its content is for other countries to apply IEC 60364-7-711.2008 Relevant practices have nothing to do with our country. Please note that some content of this document may be patented. The issuing agency of this document assumes no responsibility for identifying patents. This document is proposed and managed by the National Technical Committee for Standardization of Electrical Installations in Buildings (SAC/TC205). This document is drafted by. Beijing Xingdian International Engineering Management Co., Ltd., China Machinery Design and Research Institute Co., Ltd., Siemens (China) Co., Ltd., Schneider Electric (China) Co., Ltd., Shanghai Architectural Design and Research Institute Co., Ltd. The main drafters of this document. Hu Jianping, Zhang Tieming, Zhen Zhuo, Liu Xu, Hu Hongyu, Tang Ying, Chen Zhongli. The previous versions of this document and its superseded documents are as follows. ---First released as GB 16895.25-2005 in.2005, and converted into GB/T 16895.25-2005 in.2017; ---This is the first revision.IntroductionGB/T 16895 (all parts) proposes the safety protection of medium and low voltage electrical installations in general installations or places and special installations or places, Selection of electrical equipment, installation requirements and inspection requirements. It has positive guiding significance for the safe use of low-voltage electrical installations. GB/T 16895 is intended to be composed of six parts. --- Part 1.Basic principles, general characteristics evaluation and definition. Determining safety for the design, installation and inspection of low-voltage electrical installations Rules to avoid damage to people, livestock and property during the installation and use of low-voltage electrical installations, and to ensure that electrical installations are safe Install and run correctly. --- Part 4.Safety protection. Contains subsections 4-41, 4-42, 4-43, 4-44, which respectively describe the installation and use of electrical devices The four types of electrical hazards that may be generated in the process of electric shock, thermal effect, overcurrent, voltage interference and electromagnetic interference have proposed specific safety measures. protection requirements. --- Part 5.Selection and installation of electrical equipment. Contains subsections 5-51, 5-52, 5-53, 5-54, 5-55, 5-56 for the purpose of Equipment use function and installation environment, wiring system, isolation, switching and control equipment, grounding configuration and protective conductor, low-voltage generator Requirements for the selection and installation of electrical equipment, auxiliary equipment, safety facilities and other electrical equipment. --- Part 6.Inspection. Put forward specific requirements for the preliminary inspection and periodic inspection of electrical installations, and provide long-term safe operation of the equipment. Quality assurance. --- Part 7.Requirements for special installations or locations. Contains 7-701, 7-702, 7-703, 7-704, 7-705, 7-706, 7-710, 7- Subparts 711, 7-712, 7-713, 7-714, 7-715, 7-717, 7-722, 7-740, 7-753 requirements for safety protection, equipment selection and installation. The sub-parts of Part 7 are relatively independent and have no direct connection. --- Part 8.Functional aspects. Contains subsection 8-1, Evaluation of Energy Efficiency (EE) for the design, installation and operation of electrical installations The assessment puts forward requirements, recommendations and methods. Parts 1, 4, 5 and 6 above are general parts (general parts) and most of the requirements apply to Part 7. Some special requirements in this document supplement, modify or replace certain requirements of the general part of GB/T 16895 in effect at the time of publication of this document beg. The absence of reference to excluded general parts and terms means that these general parts and terms apply (undated references). Replaced those requirements that were still in effect at the time of publication of this document. The article numbering of this document follows the pattern of GB/T 16895 and the corresponding references. The number following the specific number in this document is The number of the clause in the corresponding part or other part of GB/T 16895.In addition to the requirements or interpretations of other parts of GB/T 16895, such as If additional requirements or interpretations are required, the numbering of its clauses shall be 711.101, 711.102, 711.103, etc. If the revision of the general part has updated or revised the numbering after the publication of this document, the general part referred to in this document Clause numbers may no longer be consistent with the latest version of the General Section. Note the version number of the referenced file. Low Voltage Electrical Installations Part 7-711. Requirements for special installations or locations Exhibitions, displays and exhibition areas 711 Exhibitions, displays and exhibition areas 711.1 Scope The special requirements in this document apply to temporary electrical installations (including movable and portable displays and equipment in exhibitions, displays and exhibition areas) prepared). 711.2 Normative references The contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, dated citations documents, only the version corresponding to that date applies to this document; for undated references, the latest edition (including all amendments) applies to this document. GB/T 16895.21-2020 Low Voltage Electrical Installations Part 4-41.Safety Protection Electric Shock Protection [IEC 60364-4-41. 2017 (IEC 60364-4-41.2005 IEC 60364-4-41.2005/AMD1.2017), IDT] Note 1.GB/T 5023 (all parts) PVC insulated cables with rated voltage of 450/750V and below [IEC 60227 (all parts)] Note 2.GB/T 5013 (all parts) rubber insulated cables with rated voltage of 450/750V and below [IEC 60245 (all parts)] IEC 60309-1 Industrial plugs, fixed or portable socket-outlets and appliance sockets - Part 1.General requirements (Plugs, fixed or sockets) Note 3.GB/T 11918.1-2014 Industrial plugs, sockets and couplers - Part 1.General requirements (IEC 60309-1.2012, MOD) IEC 60309-2 Industrial plugs, fixed or portable socket-outlets and appliance sockets - Part 2.Dimensions and dimensions of pin and socket accessories Note 4.GB/T 11918.2-2014 Industrial plugs, sockets and couplers - Part 2.Dimensional compatibility and interchangeability of electrical accessories with pins and sockets Sexual requirements (IEC 60309-2.2012, MOD) IEC 60332-1-1 Fire tests for electrical and optical cables under flame conditions - Part 1-1.Vertical Note 5.GB/T 18380.11-2008 Fire test for cables and optical cables under flame conditions - Part 11.Vertical flame spread of a single insulated wire and cable Test test device (IEC 60332-1-1.2004, IDT) IEC 60332-3 (all parts) Fire tests for electrical and optical cables under flame conditions Part 3.Vertically installed bundles of wires ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 16895.25-2022_English be delivered?Answer: Upon your order, we will start to translate GB/T 16895.25-2022_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 16895.25-2022_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 16895.25-2022_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 16895.25-2022?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 16895.25-2022 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
