GB/T 16857.8-2022 English PDFUS$834.00 ยท In stock
Delivery: <= 7 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 16857.8-2022: Geometrical product specifications(GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 8: CMMs with optical distance sensors Status: Valid
Basic dataStandard ID: GB/T 16857.8-2022 (GB/T16857.8-2022)Description (Translated English): Geometrical product specifications(GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 8: CMMs with optical distance sensors Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: J42 Classification of International Standard: 17.040.30 Word Count Estimation: 46,492 Date of Issue: 2022-12-30 Date of Implementation: 2023-04-01 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 16857.8-2022: Geometrical product specifications(GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 8: CMMs with optical distance sensors---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. ICS 17.040.30 CCSJ42 National Standards of People's Republic of China Product Geometry Specification (GPS) Coordinate Measurement System (CMS) acceptance testing and re-inspection testing Part 8.Use of optical distance sensors coordinate measuring machine (ISO 10360-8.2013, IDT) Released on 2022-12-30 and implemented on 2023-04-01 State Administration for Market Regulation Released by the National Standardization Management Committee table of contentsPreface I Introduction II 1 Scope 1 2 Normative references 1 3 Terms and Definitions 2 4 symbols 8 5 Metrological characteristic requirements 8 5.1 Environmental conditions 8 5.2 Working conditions 9 5.3 Detecting shape errors 9 5.4 Detecting discrete values 9 5.5 Detection of size errors 9 5.6 Total probing size error 9 5.7 Length measurement error 10 5.8 Plane shape measurement error 10 5.9 Influence of workpiece load 10 6 Acceptance testing and re-inspection testing 10 6.1 General 10 6.2 Detection characteristics 10 6.3 Length measurement error 15 6.4 Plane shape measurement error 18 7 Qualification judgment 20 7.1 Acceptance test 20 7.2 Re-inspection detection 22 8 Applications 22 8.1 Acceptance test 22 8.2 Re-inspection detection 22 8.3 Periodic verification 22 9 Instructions in product documentation and data sheets 22 Appendix A (Informative) Structural Resolution Test 24 Appendix B (Normative) Standards representing reference detection lengths28 Appendix C (Informative) Calibration of Gauges 35 Appendix D (Normative) The gimbal position value of the coordinate measuring machine equipped with the gimbal detection system of the optical distance sensor 37 Appendix E (Informative) Relationship with GPS Matrix Model 40 Reference 41forewordThis document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1.Structure and Drafting Rules for Standardization Documents" drafting. This document is GB/T 16857 "Geometric Product Specification (GPS) Coordinate Measurement System (CMS) Acceptance Test and Re-inspection Test" Part 8 of. GB/T 16857 has issued the following parts. --- Part 1.Vocabulary; --- Part 2.Coordinate measuring machines for measuring linear dimensions; --- Part 3.Coordinate measuring machine with the axis of the turntable as the fourth axis; --- Part 4.Coordinate measuring machines used in scanning mode; --- Part 5.Coordinate measuring machines using single-probe or multi-probe tactile probing systems; --- Part 6.Evaluation of errors in calculating Gaussian fitting elements; --- Part 7.Coordinate measuring machine equipped with image detection system; --- Part 8.Coordinate measuring machines using optical distance sensors; --- Part 9.Coordinate measuring machines equipped with multiple detection systems; --- Part 901.Coordinate measuring machines equipped with multi-image detection systems; --- Part 10.Laser tracker; --- Part 12.Articulated arm coordinate measuring machine. This document is equivalent to ISO 10360-8.2013 "Geometric Product Specification (GPS) Coordinate Measuring System (CMS) Acceptance Test and re-inspection testing Part 8.Coordinate Measuring Machines Using Optical Distance Sensors". Please note that some contents of this document may refer to patents. The issuing agency of this document assumes no responsibility for identifying patents. This document is proposed and managed by the National Product Geometric Technical Specification Standardization Technical Committee (SAC/TC240). This document is drafted by. Carl Zeiss (Shanghai) Management Co., Ltd., Guangdong Samsen Technology Co., Ltd., China Machinery Productivity Promotion Center Co., Ltd., China Jiliang University, Guangzhou Radio and Television Metrology and Testing Co., Ltd., Hexagon Manufacturing Intelligent Technology (Qingdao) Co., Ltd. Division, Dongguan Zhongwang Precision Instrument Co., Ltd., Shenzhen Zhongtu Instrument Co., Ltd., China Machine Research Institute of Standard Technology (Beijing) Co., Ltd. Company, Suzhou Huaxing Yuanchuang Technology Co., Ltd. The main drafters of this document. Han Dingzhong, Zhang Qingxiang, Wang Weinong, Ming Cuixin, Zhang Weikang, Zhao Jun, Wang Huizhen, Wang Yongfeng, Zhao Keren, Zhang Hejun, Zhu Yue, Ming Zhimao, Zheng Chunping, Jiang Bin, Han Chuanyun.IntroductionAiming at the key issues such as the lack of acceptance testing and re-inspection testing standards of coordinate measuring machines, and the urgent demand for corresponding testing standards, the focus of research Acceptance testing and re-inspection testing methods of coordinate measuring machines, qualification judgment rules, application of acceptance testing and re-inspection testing, formulate conforming product National standard for acceptance testing and re-inspection testing of Coordinate Measuring System (CMS) for Geometric Specifications (GPS). GB/T 16857 "Geometric Product Specification (GPS) Coordinate Measurement System (CMS) Acceptance Test and Re-inspection Test" is based on the product Geometric technical specification (GPS) system, using coordinate measurement technology, sensor technology and error theory, etc., through theoretical analysis, international standard research, measurement Recommended national standards for acceptance testing and re-inspection testing of coordinate measuring machines formulated based on the summary of practical experience in quantitative applications. The system of GB/T 16857 It will definitely fill the gap in the acceptance testing and re-inspection testing standards of coordinate measuring machines in my country, and help all relevant coordinate measuring machine manufacturers to unify the testing methods This method can improve the consistency and stability of the performance of the coordinate measuring machine in the factory, and provide a powerful technical support for the acceptance test and re-inspection of the coordinate measuring machine. technical support. GB/T 16857 is proposed to consist of 14 parts. --- Part 1.Vocabulary. The purpose is to define a vocabulary for coordinate measuring machines and their acceptance and re-inspection tests. --- Part 2.Coordinate measuring machines for measuring linear dimensions. The purpose is to specify coordinate measuring machines for measuring linear dimensions, The verification method of acceptance testing according to the characteristic indicators given by the manufacturer, and the user's periodic re-inspection of the measuring machine verification method. --- Part 3.Coordinate measuring machine configured with the axis of the turntable as the fourth axis. The purpose is to specify to verify a specified by the manufacturer Acceptance testing specifications for the performance of the four-axis coordinate measuring machine, and the re-inspection for the user to periodically re-verify the performance of the four-axis coordinate measuring machine Inspection specification. --- Part 4.Coordinate measuring machine used in scanning mode. The purpose is to specify the coordinate measuring machine used in scan mode Performance acceptance testing and re-inspection testing. --- Part 5.Coordinate measuring machines using single-probe or multi-probe tactile probing systems. The purpose is to specify the Methods for acceptance testing and re-inspection testing of coordinate measuring machine characteristics for measurement systems. --- Part 6.Evaluation of the error of calculating Gaussian fitting elements. The purpose of this document is to specify a method for testing software that is used for sitting The standard measure calculates the fitted features. --- Part 7.Coordinate measuring machine with image detection system. The purpose is to specify the verification of coordinate measuring machines used to measure dimensions Acceptance testing methods to determine whether it meets the performance specified by the manufacturer, and the user regularly verifies the performance of the coordinate measuring machine capable retesting methods. --- Part 8.Coordinate measuring machines using optical distance sensors. The purpose is to specify the parameters specified by the CMM manufacturer or user The specified performance requirements, the acceptance test method for verifying the coordinate measuring machine according to the characteristic indicators given by the manufacturer, and the user regularly verifying the position The application of re-inspection testing methods, qualification judgment rules, acceptance testing and re-inspection testing for standard measuring machine performance. --- Part 9.Coordinate measuring machine configured with multiple detection systems. The purpose is to provide for multiple probes equipped with contact/non-contact measurement modes. The detection method of the coordinate measuring machine of the measurement system. --- Part 901.Coordinate measuring machine with multi-image detection system. The purpose is to specify the location of the multi-image detection system Method for acceptance testing and re-inspection testing of marking measuring machines. --- Part 10.Laser tracker. The purpose is to specify the acceptance test specifications for the performance of the laser tracker and the user's periodic re-verification incentives. Re-inspection test specification for optical tracker performance. --- Part 11.Industrial CT. The purpose is to specify the principle of X-ray computed tomography (CT) based on X-ray attenuation Inspection methods and metrological characteristics of coordinate measuring systems (CMS) for dimensional measurement of technical components as a single sensor. --- Part 12.Articulated arm coordinate measuring machine. The purpose is to specify the acceptance testing and review of the performance of articulated arm coordinate measuring machines detection. --- Part 13.Optical three-dimensional coordinate measuring machine. The purpose is to specify the acceptance testing and re-inspection of the performance of optical three-dimensional coordinate measuring machines detection. Product Geometry Specification (GPS) Coordinate Measurement System (CMS) acceptance testing and re-inspection testing Part 8.Use of optical distance sensors coordinate measuring machine1 ScopeThis document specifies the acceptance test method for verifying the coordinate measuring machine according to the characteristic indicators given by the manufacturer, and also specifies the user's periodic inspection. Re-inspection testing methods to verify the performance of coordinate measuring machines. The methods of acceptance inspection and re-inspection inspection specified in this document are only applicable to coordinate measurement in Cartesian coordinate system using optical distance sensor. Measuring machine. It is not clear whether this document is applicable to coordinate measuring machines with non-Cartesian coordinate systems. With the agreement of the parties, this document can also be used for non-Cartesian coordinate measuring machines. coordinate measuring machine. Note. This document is not formulated for coordinate measuring machines whose measurement space is significantly smaller than the size of the detection ball, but the detection principle, standard device and procedures described in this document can be used It is used for acceptance testing and re-inspection testing of such CMMs by adjusting parameters such as standard size and number of measurements. This document states. --- Performance requirements specified by the coordinate measuring machine manufacturer or user; --- Method of acceptance testing and re-inspection testing according to the stated requirements; ---Quality determination rules; ---Application of acceptance testing and re-inspection testing.2 Normative referencesThe contents of the following documents constitute the essential provisions of this document through normative references in the text. Among them, dated references For documents, only the version corresponding to the date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to this document. GB/T 16857.2-2017 Product Geometric Specifications (GPS) Coordinate Measuring Machine Acceptance Test and Re-inspection Test Part 2 Sub. Coordinate Measuring Machines for Measuring Linear Dimensions (ISO 10360-2.2009, IDT) GB/T 16857.5-2017 Product Geometric Specifications (GPS) Coordinate Measuring Machine Acceptance Test and Re-inspection Test Part 5 Sub-point. Coordinate measuring machines using single-probe or multi-probe tactile probing systems (ISO 10360-5.2010, IDT) ISO 10360-1.2000 Product geometric specification (GPS) Coordinate measuring machine acceptance test and re-inspection test Part 1 Note. GB/T 16857.1-2002 Technical specifications for product geometry (GPS) Coordinate measuring machine acceptance testing and re-inspection testing Part 1.Vocabulary (eqv, ISO 10360-1.2000) ISO 14253-1 Geometric product specification (GPS) Measurement inspection of workpieces and measuring equipment Part 1.Verification of conformity to specification specifications] Note. GB/T 18779.1-2022 Product Geometric Specifications (GPS) Measurement and Inspection of Workpieces and Measuring Equipment Part 1.Verification according to the specification or ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 16857.8-2022_English be delivered?Answer: Upon your order, we will start to translate GB/T 16857.8-2022_English as soon as possible, and keep you informed of the progress. The lead time is typically 4 ~ 7 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 16857.8-2022_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 16857.8-2022_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
