GB/T 16857.12-2022 English PDFUS$694.00 ยท In stock
Delivery: <= 6 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 16857.12-2022: Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems(CMS) - Part 12: Articulated arm coordinate measurement machines(CMM) Status: Valid
Basic dataStandard ID: GB/T 16857.12-2022 (GB/T16857.12-2022)Description (Translated English): Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems(CMS) - Part 12: Articulated arm coordinate measurement machines(CMM) Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: J42 Classification of International Standard: 17.040.30 Word Count Estimation: 38,391 Date of Issue: 2022-12-30 Date of Implementation: 2023-04-01 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 16857.12-2022: Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems(CMS) - Part 12: Articulated arm coordinate measurement machines(CMM)---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. ICS 17.040.30 CCSJ42 National Standards of People's Republic of China Product Geometry Specification (GPS) Coordinate Measurement System (CMS) acceptance testing and re-inspection Testing - Part 12.Coordinate Measuring Machines with Articulated Arms (ISO 10360-12.2016, IDT) Posted on 2022-12-30 2023-04-01 Implementation State Administration for Market Regulation Released by the National Standardization Management Committee table of contentsPreface I Introduction II 1 Scope 1 2 Normative references 1 3 Terms and Definitions 2 4 symbols 5 5 Rated operating conditions 7 6 Acceptance testing and re-inspection testing 7 7 Qualification judgment 14 8 Applications 15 9 Instructions in product documentation and data sheets 16 Appendix A (Informative) Form 18 Appendix B (Normative) Standards to reproduce the reference detection length 19 Appendix C (Informative) Calibration of Standard 23 Appendix D (informative) period check 24 Appendix E (Normative) Scanning detection system for testing articulated arm coordinate measuring machines 26 Appendix F (Normative) Length error measurement by connecting detection length 27 Appendix G (informative) optional gimbal detection size and shape error 30 Appendix H (informative) Optional repeatability ranges for length measurement errors31 Appendix I (Informative) Relationship with GPS Matrix Model 32 Reference 33forewordThis document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1.Structure and Drafting Rules for Standardization Documents" drafting. This document is GB/T 16857 "Geometric Product Specification (GPS) Coordinate Measurement System (CMS) Acceptance Test and Re-inspection Test" Part 12 of. GB/T 16857 has issued the following parts. --- Part 1.Vocabulary; --- Part 2.Coordinate measuring machines for measuring linear dimensions; --- Part 3.Coordinate measuring machine with the axis of the turntable as the fourth axis; --- Part 4.Coordinate measuring machines used in scanning mode; --- Part 5.Coordinate measuring machines using single-probe or multi-probe tactile probing systems; --- Part 6.Evaluation of errors in calculating Gaussian fitting elements; --- Part 7.Coordinate measuring machine equipped with image detection system; --- Part 8.Coordinate measuring machines using optical distance sensors; --- Part 9.Coordinate measuring machines equipped with multiple detection systems; --- Part 901.Coordinate measuring machines equipped with multi-image detection systems; --- Part 10.Laser tracker; --- Part 12.Articulated arm coordinate measuring machine. This document is equivalent to ISO 10360-12.2016 "Geometric Product Specification (GPS) Coordinate Measuring System (CMS) Acceptance Inspection Inspection and re-inspection inspection Part 12.Articulated arm coordinate measuring machine". Please note that some contents of this document may refer to patents. The issuing agency of this document assumes no responsibility for identifying patents. This document is proposed and managed by the National Product Geometric Technical Specification Standardization Technical Committee (SAC/TC240). This document is drafted by. Beijing Danqing Huarui Technology and Trade Co., Ltd., Chongqing Institute of Metrology and Quality Inspection, Hexagon Manufacturing Intelligence Energy Technology (Qingdao) Co., Ltd., China Machinery Technology (Beijing) Vehicle Inspection Engineering Research Institute Co., Ltd., China Machine Productivity Promotion Center Co., Ltd., China Machine Research Institute of Standard Technology (Beijing) Co., Ltd., Aipeiyi Intelligent Equipment Co., Ltd., Chizhou An'an New Material Technology Co., Ltd. The main drafters of this document. Li Li, Xu Jian, Sui Zhanjiang, Wei Zhe, Ming Cuixin, Yang Gaofeng, Zhu Yue, Liu Peifeng.IntroductionAiming at the key issues such as the lack of acceptance testing and re-inspection testing standards of coordinate measuring machines, and the urgent demand for corresponding testing standards, the focus of research Acceptance testing and re-inspection testing methods of coordinate measuring machines, qualification judgment rules, application of acceptance testing and re-inspection testing, formulate conforming product National standard for acceptance testing and re-inspection testing of Coordinate Measuring System (CMS) for Geometric Specifications (GPS). GB/T 16857 "Geometric Product Specification (GPS) Coordinate Measurement System (CMS) Acceptance Test and Re-inspection Test" is based on the product Geometry Specification (GPS) system, using coordinate measurement technology, sensor technology and error theory, etc., through theoretical analysis, international standard research, The recommended national standards for acceptance testing and re-inspection testing of coordinate measuring machines have been formulated based on the summary of practical experience in measurement applications. GB/T 16857 The formulation can fill the gaps in my country's coordinate measuring machine acceptance testing and re-inspection testing standards, and will help all relevant coordinate measuring machine manufacturers to uniformly inspect It improves the consistency and stability of the performance of the coordinate measuring machine at the factory, and provides a strong guarantee for the acceptance test and re-inspection of the coordinate measuring machine. Powerful technical support. GB/T 16857 is proposed to consist of 14 parts. --- Part 1.Vocabulary. The purpose is to define the vocabulary of coordinate measuring machines and their acceptance and re-inspection tests. --- Part 2.Coordinate measuring machines for measuring linear dimensions. The purpose is to specify coordinate measuring machines for measuring linear dimensions, The verification method of acceptance testing according to the characteristic indicators given by the manufacturer, and the user's periodic re-inspection of the measuring machine verification method. --- Part 3.Coordinate measuring machine configured with the axis of the turntable as the fourth axis. The purpose is to specify to verify a specified by the manufacturer Acceptance testing specifications for the performance of the four-axis coordinate measuring machine, and the re-inspection for the user to periodically re-verify the performance of the four-axis coordinate measuring machine Inspection specification. --- Part 4.Coordinate measuring machine used in scanning mode. The purpose is to specify the coordinate measuring machine used in scan mode Performance acceptance testing and re-inspection testing. --- Part 5.Coordinate measuring machines using single-probe or multi-probe tactile probing systems. The purpose is to specify the Methods for acceptance testing and re-inspection testing of coordinate measuring machine characteristics for measurement systems. --- Part 6.Evaluation of the error of calculating Gaussian fitting elements. The purpose of this document is to specify a method for testing software that is used for sitting The standard measure calculates the fitted features. --- Part 7.Coordinate measuring machine with image detection system. The purpose is to specify the verification of coordinate measuring machines used to measure dimensions Acceptance testing methods to determine whether it meets the performance specified by the manufacturer, and the user regularly verifies the performance of the coordinate measuring machine capable retesting methods. --- Part 8.Coordinate measuring machines using optical distance sensors. The purpose is to specify the parameters specified by the CMM manufacturer or user The specified performance requirements, the acceptance test method for verifying the coordinate measuring machine according to the characteristic indicators given by the manufacturer, and the user regularly verifying the position The application of re-inspection testing methods, qualification judgment rules, acceptance testing and re-inspection testing for standard measuring machine performance. --- Part 9.Coordinate measuring machine configured with multiple detection systems. The purpose is to provide for multiple probes equipped with contact/non-contact measurement modes. The detection method of the coordinate measuring machine of the measuring system. --- Part 901.Coordinate measuring machine with multi-image detection system. The purpose is to specify the location of the multi-image detection system Method for acceptance testing and re-inspection testing of marking measuring machines. --- Part 10.Laser tracker. The purpose is to specify the acceptance test specifications for the performance of the laser tracker and the user's periodic re-verification incentives. Re-inspection test specification for optical tracker performance. --- Part 11.Industrial CT. The purpose is to specify the principle of X-ray computed tomography (CT) based on X-ray attenuation Inspection methods and metrological characteristics of coordinate measuring systems (CMS) for dimensional measurement of technical components as a single sensor. --- Part 12.Articulated arm coordinate measuring machine. The purpose is to specify the acceptance testing and review of the performance of articulated arm coordinate measuring machines detection. --- Part 13.Optical three-dimensional coordinate measuring machine. The purpose is to specify the acceptance testing and re-inspection of the performance of optical three-dimensional coordinate measuring machines detection. Product Geometry Specification (GPS) Coordinate Measurement System (CMS) acceptance testing and re-inspection Testing - Part 12.Coordinate Measuring Machines with Articulated Arms1 ScopeThis document specifies the acceptance and re-inspection tests for the performance of articulated arm coordinate measuring machines. This document is intended for use with touch probes and optional optical distance sensor accessories (also known as line laser scanners or line laser probes) Articulated arm coordinate measuring machine. Acceptance testing is the verification of manufacturer-specified performance by measuring a calibrated detection length. The re-inspection detection is the user can regularly check the joint The performance of the arm type coordinate measuring machine is rechecked. Detailed information on the testing of scanner accessories is given in Appendix E. This document does not specify the frequency and cycle of testing, nor does it specify which party shall bear the testing costs. This document states. ---The performance requirements of the articulated arm coordinate measuring machine are specified by the manufacturer or the user; --- The execution mode of the acceptance test and re-inspection test used to prove the specified requirements; ---Conformity determination rules; ---Application of acceptance testing and re-inspection testing.2 Normative referencesThe contents of the following documents constitute the essential provisions of this document through normative references in the text. Among them, dated references For documents, only the version corresponding to the date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to this document. ISO 10360-1 Geometric product specification (GPS) acceptance testing and re-inspection testing of coordinate measuring machines - Part 1.Vocabulary uringmachines(CMM)-Part 1.Vocabulary] Note. GB/T 16857.1-2002 Technical specifications for product geometry (GPS) Coordinate measuring machine acceptance testing and re-inspection testing Part 1.Vocabulary (ISO 10360-1.2000, eqv) ISO 10360-5 Product geometric specification (GPS) Coordinate measuring system (CMS) acceptance test and re-inspection test Part 5 Sub. Coordinate measuring machines for single- and multi-stylus tactile probing systems using discrete point and/or scanning measurement modes [Geometrical ISO 10360-8.2013 Product geometric specification (GPS) Coordinate measurement system (CMS) acceptance test and re-inspection test No. 8 Note. GB/T 16857.8-2022 Product Geometry Specification (GPS) Coordinate Measurement System (CMS) Acceptance Test and Re-inspection Test Part 8. Coordinate measuring machines using optical distance sensors (ISO 10360-8.2013, IDT) ISO 10360-9.2013 Product geometric specification (GPS) Coordinate measurement system (CMS) acceptance test and re-inspection test No. 9 ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 16857.12-2022_English be delivered?Answer: Upon your order, we will start to translate GB/T 16857.12-2022_English as soon as possible, and keep you informed of the progress. The lead time is typically 4 ~ 6 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 16857.12-2022_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 16857.12-2022_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
