GB/T 15408-2011 English PDFUS$719.00 · In stock
Delivery: <= 6 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 15408-2011: Technical requirement of power-supply for security and protection system Status: Valid GB/T 15408: Historical versions
Basic dataStandard ID: GB/T 15408-2011 (GB/T15408-2011)Description (Translated English): Technical requirement of power-supply for security and protection system Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: A91 Classification of International Standard: 13.310 Word Count Estimation: 31,323 Date of Issue: 2011-06-16 Date of Implementation: 2011-12-01 Older Standard (superseded by this standard): GB/T 15408-1994 Quoted Standard: GB 4208-2008; GB 4943-2001; GB 8702; GB/T 14549; GB/T 15211; GB 17625.1; GB/Z 17625.6; GB/T 17626.2-2006; GB/T 17626.3-2006; GB/T 17626.4-2008; GB/T 17626.5-2008; GB/T 17626.6-2008; GB/T 17626.11-2008; GB 50057; GB 50343; GBA/T 670; JGJ 16-2008; GB 50348 Regulation (derived from): Announcement of Newly Approved National Standards No. 9 of 2011 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the security system technical requirements of power supply is powered systems security system design, equipment selection, installation and construction, testing and acceptance of the fundamental basis. This standard applies to security (hereinafter referred to as security) system power supply design, installation, construction, testing and acceptance. GB/T 15408-2011: Technical requirement of power-supply for security and protection system---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Technical requirement of power-supply for security ICS 13.310 A91 National Standards of People's Republic of China Replacing GB/T 15408-1994 Security system supply technical requirements forsecurity Issued on. 2011-06-16 2011-12-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released Table of ContentsIntroduction Ⅲ 1 Scope 1 2 Normative references 1 3 Terms, Definitions and Abbreviations 1 3.1 Terms and definitions 3.2 Abbreviations 2 4 security system, power supply system constituted 2 4.1 overall composition 2 4.2 power supply system power mode 3 5 Power Supply System Requirements 4 5.1 Basic requirements 4 5.2 Main Power Requirements 5 5.3 Standby Power Requirements 5 5.4 power supply protection requirements 6 5.5 8 power distribution and transfer requirements Power transmission requirements 8 5.6 5.7 Power Control Center configuration requirements 9 5.8 security systems equipment distribution requirements 9 Intrusion Alarm System 5.9 power requirements 9 5.10 video monitoring subsystem power requirements 9 5.11 access control subsystem power requirements 10 5.12 Other subsystem power requirements 10 6 power supply system security, reliability, electromagnetic compatibility and environmental adaptability requirements 11 Security System 6.1 power requirements 11 The reliability of the power supply system of claim 12 6.2 Electromagnetic Compatibility 12 6.3 Power Supply System Requirements 6.4 Power Supply System of claim 13 environmental adaptability 7 lightning protection and grounding requirements 13 8 power supply system identification, monitoring and control, energy efficiency and environmental management requirements 14 8.1 Marking Requirements 14 8.2 Operating instructions claim 14 8.3 monitor and control the power supply system management requirements 14 8.4 powered device energy efficiency and environmental requirements 15 8.5 Load Requirements 15 9 power supply equipment and power supply cable selection and installation requirements 16 9.1-powered equipment selection principles 16 9.2 Common Power Equipment Selection configuration requirements 16 9.3 Selection and installation of power cables requirements 17 9.4 power supply equipment installation requirements 18 Testing and acceptance requirements of the power supply system 10 18 Appendix A (informative) security system power consumption calculation method of example 19 Annex B (informative) Common AC-DC converter specifications, calculations lead safe current carrying capacity of 21 Annex C (informative) AC power supply, uninterruptible power supply (UPS) main technical indicators 22 Calculation Appendix D (informative) line drop 24 1 power supply system block diagram of Figure 3 Figure 2 a block diagram of centralized power supply mode 4 3 local utility grid power supply mode Box 4 4 independent power mode Typical Scheme 4 Table 1 common load power supply protection mode 6 Table 2 common main power supply and standby power supply mode combinations 7ForewordThis standard was drafted in accordance with GB/T 1.1-2009 given rules. This standard is GB/T 15408-1994 "Alarm system power units, test methods and performance criteria," the revised and standard name Changed to "security system power supply technology requirements." This standard compared with GB/T 15408-1994, the main technical changes are as follows. --- Alarm system power units to expand the power supply system for the security system, the power supply performance requirements, expand security Performance of the system power supply system requirements, configuration requirements of the principle of comprehensive, system management, power supply equipment installation requirements (see GB/T 15408-1994, Chapter 5, Chapter 6, Chapter 7, Chapter 8, Chapter 9); --- Clear interface with the power supply system and the relationship between the city grid (see 5.2.3,5.2.4); --- Clear security system power supply protection requirements (see 5.4); --- Clear each subsystem power requirements (see 5.9,5.10,5.11,5.12); --- Clearly safety, electromagnetic compatibility requirements (see 6.1, 6.3); --- Increase energy efficiency, environmental protection and other requirements (see 8.4,8.5,6.4.2,6.3.2); --- Increased interface with the relationship between the content supply device and the load (see 9.1.3,9.1.4); --- Clear security systems powered equipment selection requirements (see Chapter 9); --- Increase the number of informative annex (see Appendix A, Appendix B, Appendix C, Appendix D). Please note that some of the content of this document may involve patents. Release mechanism of the present document does not assume responsibility for the identification of these patents. The standard proposed by the People's Republic of China Ministry of Public Security. This standard by the National Security Alarm System Standardization Technical Committee (SAC/TC100) centralized. This standard was drafted. Beijing in the security shield technology development company, Beijing Univision Aegis Security Technology Co., Ltd., the Ministry of Public Security Police Electronic Products Quality Inspection Center, Ministry of Public Security First Research Institute of China Building Standard Design and Research Institute, Guangdong Zhicheng Champion Group Co., Ltd. The main drafters of this standard. Yang Guosheng, Li Xiulin, Jin Wei, Sun Lan, Li Minying. This standard replaces the standards previously issued as follows. --- GB/T 15408-1994. Security system supply technical requirements1 ScopeThis standard specifies the security requirements of the system power supply technology, the security system power supply system design, equipment selection, installation The fundamental basis for the construction, testing and acceptance. This standard applies to security (hereinafter referred to as security) system power supply design, installation, testing and acceptance.2 Normative referencesThe following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB 4208-2008 shell protection (IP code) GB 4943-2001 Safety of information technology equipment GB 8702 electromagnetic radiation protection GB/T 14549 Power quality utility grid harmonic GB/T 15211 alarm system environmental testing GB 17625.1 Electromagnetic Compatibility Limits for harmonic current emissions (equipment input current ≤16A) GB /Z17625.6 harmonic electromagnetic compatibility limits rated current greater than 16A devices in low-voltage power supply systems Limit flow GB/T 17626.2-2006 Electromagnetic compatibility - Testing and measurement techniques - Electrostatic discharge immunity test GB/T 17626.3-2006 Electromagnetic compatibility - Testing and measurement techniques RFEMS test GB/T 17626.4-2008 Electromagnetic compatibility - Testing and measurement techniques - Electrical fast transient burst immunity test GB/T 17626.5-2008 Electromagnetic compatibility - Testing and measurement techniques - Surge (impact) immunity test GB/T 17626.6-2008 Electromagnetic compatibility - Testing and measurement techniques Immunity to conducted disturbances induced field GB/T 17626.11-2008 Electromagnetic compatibility Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity test GB 50057 Lightning in design GB 50343 building electronic information system lightning protection technical specifications GB 50348 security engineering and technical norms GA/T 670 security systems, lightning surge protection Technical Requirements JGJ16-2008 civil electrical design specifications 3 Terms, definitions and abbreviations 3.1 Terms and Definitions JGJ16-2008 define the following terms and definitions apply to this document. 3.1.1 Main power mainpowersupply Support security systems or equipment fully functioning power source. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 15408-2011_English be delivered?Answer: Upon your order, we will start to translate GB/T 15408-2011_English as soon as possible, and keep you informed of the progress. The lead time is typically 4 ~ 6 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 15408-2011_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 15408-2011_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 15408-2011?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 15408-2011 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
